Radiator Reserve Tank - Honda CBR125R Owner's Manual

Install a new O-ring to the water pump cover.
Install the water pump cover.
Install and tighten the bolts, drain bolt and new
sealing washer securely.
Fill the recommended coolant mixture to the filler
neck and bleed the air (page 6-6).

RADIATOR RESERVE TANK

REMOVAL/INSTALLATION
Remove the following:
– Rear cowl (page 2-5)
– Air cleaner housing (page 5-52)
Drain the coolant from the reserve tank (page 6-7).
Remove the bolt and reserve tank.
Disconnect the overflow and siphon hoses from the
reserve tank.
Connect the overflow and siphon hoses to the
reserve tank.
Install the reserve tank to the frame, aligning the tab
Route the hoses
of the reserve tank with slit of the frame.
properly (page 1-
18).
Install and tighten the bolt.
Install the following:
– Air cleaner housing (page 5-52)
– Rear cowl (page 2-5)
COOLING SYSTEM
O-RING
BOLTS
DRAIN BOLT/SEALING WASHER
RESERVE TANK
HOSES
Align
SIPHON HOSE
OVERFLOW HOSE
COVER
BOLT
BOLT BOLT
6-19