Honda CBR125R Owner's Manual page 233

CLUTCH/GEARSHIFT LINKAGE
Install the right crankcase cover, clamp and bolts.
BOLTS
Tighten the bolts in a crisscross pattern in 2 or 3
steps.
BOLT/CLAMP
Connect the water hoses and tighten the water hose
WATER HOSE
band screws (page 6-14).
BAND SCREWS
Connect the clutch cable.
CLUTCH CABLE
Adjust the clutch lever freeplay (page 3-24).
Fill the engine with the recommended engine oil
(page 3-13).
Fill the recommended coolant mixture to the filler
neck and bleed the air (page 6-6).
CLUTCH
REMOVAL
Remove the right crankcase cover (page 10-5).
BEARING
BOLTS/SPRINGS
Remove the clutch lifter bearing.
Remove the clutch spring bolts in a crisscross pat-
tern in 2 or 3 steps.
Remove the clutch lifter plate and clutch springs.
PLATE
10-9