Headlight; Position Light - Honda CBR125R Owner's Manual

LIGHTS/METERS/SWITCHES

HEADLIGHT

BULB REPLACEMENT
Disconnect the headlight bulb connector.
Remove the dust cover.
Unhook the bulb retainer and remove the headlight
bulb.
Remove the headlight bulb.
Avoid touching halogen headlight bulb. Finger
prints can create hot spots that cause a bulb to
break.
Install a new bulb, while aligning the tabs of the
bulb with the slots of the headlight unit.
Hook the bulb retainer into the headlight unit
groove.
Install the dust cover with the "arrow" mark facing
up.
Connect the headlight connector.
REMOVAL/INSTLATION
Remove the upper cowl (page 2-10).
Remove the headlight mounting screws, clamps
and headlight unit.
Install the headlight unit, headlight mounting
Ro ute the wires
screws and clamps.
properly (page 1-
18).
Install the upper cowl (page 2-10).

POSITION LIGHT

BULB REPLACEMENT
Remove the screws and position light lens.
Remove the bulb from the socket, replace it with a
new one.
Check the packing is installed in position and is in
good condition, replace it with a new one if neces-
sary.
Install the position light lens and screws.
Tighten the screws.
19-4
BULB
DUST COVER
"ARROW" MARK
CONNECTOR
SCERWS
SCERWS/CLAMPS
BULB
PACKING
SCREWS LENS
Align
RETAINER