Honda CBR125R Owner's Manual page 314

FRONT WHEEL/SUSPENSION/STEERING
Connect the clutch cable to the clutch lever.
Install the clutch lever to the clutch lever bracket.
Apply grease to the clutch lever pivot bolt sliding
surface (page 1-17).
Install and tighten the clutch lever pivot bolt to the
specified torque.
TORQUE: 1.0 N·m (0.1 kgf·m, 0.7 lbf·ft)
Install and tighten the clutch lever pivot nut to the
specified torque while holding the clutch lever pivot
bolt.
TORQUE: 6.0 N·m (0.6 kgf·m, 4.4 lbf·ft)
13-32
BRACKET
CLUTCH CABLE
PIVOT BOLT
PIVOT NUT
CLUTCH LEVER