Camshaft Holder - Honda CBR125R Owner's Manual

CYLINDER HEAD/VALVES

CAMSHAFT HOLDER

REMOVAL
Remove the cylinder head cover (page 8-6).
Remove the cam sprocket (page 8-8).
Loosen the cylinder head bolts alternately in several
steps.
Loosen the camshaft holder mounting nuts in a
Be careful not to let
crisscross pattern in several steps, and remove the
the camshaft holder
washers and camshaft holder assembly.
mounting nuts and
washers fall into
the crankcase.
Remove the dowel pins from the cylinder head.
DISASSEMBLY
Remove the camshaft (page 8-8).
Remove the rocker arm shaft stopper bolts.
Push the rocker arm shafts from the right side as
shown.
Remove the rocker arm shafts and rocker arms from
the camshaft holder.
8-12
NUTS/WASHERS
CAMSHAFT HOLDER ASSEMBLY
BOLTS
SHAFTS
CAMSHAFT HOLDER
BOLTS
DOWEL PINS
ROCKER ARMS