Honda CBR125R Owner's Manual page 308

FRONT WHEEL/SUSPENSION/STEERING
Install the handlebars to both fork pipes while align-
ing the bosses on the handlebars with the cut outs
on the top bridge.
Tighten both handlebar pinch bolts to the specified
torque.
TORQUE: 27 N·m (2.8 kgf·m, 20 lbf·ft)
Install the stopper rings to the grooves of both fork
pipes.
Install the wire band to the fork pipe.
LEFT SIDE:
Route the wire properly (page 1-18).
Install the brake caliper/bracket assembly and
tighten new brake caliper mounting bolts to the
specified torque.
TORQUE: 30 N·m (3.1 kgf·m, 22 lbf·ft)
Install the following:
– Front wheel (page 13-17)
– Front fender (page 2-11)
13-26
STOPPER RING
WIRE BAND
CALIPER/BRACKET ASSEMBLY
Align
BOLT
BOLTS