Honda CBR125R Owner's Manual page 310

FRONT WHEEL/SUSPENSION/STEERING
Remove the following:
Be careful not to
loose the steel
– Upper bearing inner race
balls.
– Upper steel ball (18)
– Steering stem
– Lower steel ball (18)
BEARING REPLACEMENT
Drive out the upper and lower outer races using a
Replace the steel
special tool.
balls, outer and
inner races as a set.
TOOL:
Ball race remover
Temporarily install the steering stem nut onto the
steering stem to prevent the threads from being
damaged when removing the lower inner race from
the steering stem.
Remove the lower inner race with a chisel or equiv-
alent tools, being careful not to damage the steering
stem.
Remove the steering head bearing dust seal.
Apply specified grease (page 1-17) to a new steering
head bearing dust seal lips and install it to the steer-
ing stem.
Install a new lower inner race using a hydraulic
press and special tool.
TOOL:
Steering stem driver
13-28
INNER RACE
UPPER STEEL
BALL (18)
07GMD-KS40100
STEERING STEM
STEM NUT
07946-4300101
STEERING STEM
BALL RACE REMOVER
STEERING STEM
DRIVER
INNER RACE
DUST SEAL
LOWER STEEL
BALL (18)
INNER RACE
DUST SEAL