Pillion Seat; Single Seat - Honda CBR125R Owner's Manual

BODY PANELS/EXHAUST SYSTEM

PILLION SEAT

REMOVAL/INSTALLATION
Unhook the pillion seat lock using the ignition key.
Remove the pillion seat by pulling it rearward.
Install the pillion seat by inserting the hooks into the
seat retainers.
Push the pillion seat down to lock it.

SINGLE SEAT

REMOVAL/INSTALLATION
Remove the pillion seat (page 2-4).
Remove the mounting bolt and collar.
Remove the single seat by pulling it rearward.
Install the single seat hooks under the seat bracket
on the frame and fuel tank.
Install the collar and mounting bolt, tighten the
mounting bolt securely.
2-4
PILLION SEAT
RETAINERS
IGNITION KEY
SINGLE SEAT
HOOKS
HOOKS
COLLAR
BOLT