Honda CBR1000ST Manual
  1. Manuals
  2. Brands
  3. Honda Manuals
  4. Motorcycle
  5. CBR1000ST
  6. Manual

Honda CBR1000ST Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

20200103191036_32MKR8000_eng_BOOK Page 1 Friday, January 03 2020 19:24:26 JST
This manual should be considered a permanent part of the vehicle
and should remain with the vehicle when it is resold.
This publication includes the latest production information available
before printing. Honda Motor Co., Ltd. reserves the right to make
changes at any time without notice and without incurring any
obligation.
No part of this publication may be reproduced without written
permission.
The vehicle pictured in this owner's manual may not match your
actual vehicle.
India only
For any query or assistance, please call Customer care number: 1800
103 3434 (Toll free)
© 2019 Honda Motor Co., Ltd.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the CBR1000ST and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Honda CBR1000ST

Summary of Contents for Honda CBR1000ST

  • Page 1 This publication includes the latest production information available before printing. Honda Motor Co., Ltd. reserves the right to make changes at any time without notice and without incurring any obligation.
  • Page 2 Welcome Congratulations on your purchase of a new Country Codes Code Country Honda vehicle. Your selection of a Honda CBR1000ST makes you part of a worldwide family of European direct sales satisfied customers who appreciate Honda's Costa Rica, Guatemala, India...
  • Page 3 20200103191036_32MKR8000_eng_BOOK Page 3 Friday, January 03 2020 19:24:26 JST A Few Words About Safety Your safety, and the safety of others, is very DANGER important. Operating this vehicle safely is an You WILL be KILLED or SERIOUSLY important responsibility. HURT if you don’t follow instructions. To help you make informed decisions about safety, we have provided operating WARNING...

  • Page 4: Table Of Contents

    20200103191036_32MKR8000_eng_BOOK Page 4 Friday, January 03 2020 19:24:26 JST Contents Vehicle Safety P. 2 Operation Guide P. 22 Maintenance P. 127 Troubleshooting P. 195 Information P. 221 Specifications P. 240 Index P. 243...

  • Page 5: Vehicle Safety

    20200103191036_32MKR8000_eng_BOOK Page 5 Friday, January 03 2020 19:24:26 JST Vehicle Safety This section contains important information for safe riding of your vehicle. Please read this section carefully. Safety Guidelines ..........P. 3 Image Labels............P. 7 Safety Precautions..........P. 13 Riding Precautions ..........

  • Page 6: Safety Guidelines

    20200103191036_32MKR8000_eng_BOOK Page 6 Friday, January 03 2020 19:24:26 JST Safety Guidelines Safety Guidelines Before Riding Make sure that you are physically fit, mentally Follow these guidelines to enhance your safety: focused and free of alcohol and drugs. Check Perform all routine and regular inspections ●...
  • Page 7 Make Yourself Easy to See Make yourself more visible, especially at night, Keep Your Honda in Safe Condition by wearing bright reflective clothing, positioning yourself so other drivers can see you, signaling It's important to keep your vehicle properly before turning or changing lanes, and using maintained and in safe riding condition.
  • Page 8 20200103191036_32MKR8000_eng_BOOK Page 8 Friday, January 03 2020 19:24:26 JST Safety Guidelines If You are Involved in a Crash Lithium-Ion (Li-Ion) Battery Personal safety is your first priority. If you or CBR1000SP anyone else has been injured, take time to If you smell an unusual odor coming from the assess the severity of the injuries and whether it lithium-ion (li-ion) battery, park your vehicle in a is safe to continue riding.
  • Page 9 20200103191036_32MKR8000_eng_BOOK Page 9 Friday, January 03 2020 19:24:26 JST Safety Guidelines WARNING Carbon Monoxide Hazard Exhaust contains poisonous carbon monoxide, a Running the engine of your vehicle colourless, odorless gas. Breathing carbon while in an enclosed or even partially monoxide can cause loss of consciousness and enclosed area can cause a rapid build- may lead to death.

  • Page 10: Image Labels

    20200103191036_32MKR8000_eng_BOOK Page 10 Friday, January 03 2020 19:24:26 JST Image Labels Image Labels The following pages describe the label Read instructions contained in Owner's meanings. Some labels warn you of Manual carefully. potential hazards that could cause serious injury. Others provide important safety information.
  • Page 11 20200103191036_32MKR8000_eng_BOOK Page 11 Friday, January 03 2020 19:24:26 JST Image Labels BATTERY LABEL DANGER CBR1000ST • Keep flame and spark away from the battery. Battery produce explosive gas that can cause explosion. • Wear the eye protection and rubber gloves when handling the battery, or you can get burned or lose your eyesight by the battery electrolyte.
  • Page 12 20200103191036_32MKR8000_eng_BOOK Page 12 Friday, January 03 2020 19:24:26 JST Image Labels BATTERY LABEL DANGER CBR1000SP • Do not dismantle, modify or solder the main unit and battery terminals. Doing so may cause leakage, heat generation, explosion, fire or loss of vision due to leaked electrolyte. If electrolyte gets into one's eye, immediately wash the eye with plenty of water, and receive treatment from an eye specialist (ophthalmologist) as soon as possible.
  • Page 13 20200103191036_32MKR8000_eng_BOOK Page 13 Friday, January 03 2020 19:24:26 JST Image Labels RADIATOR CAP LABEL DANGER NEVER OPEN WHEN HOT. Hot coolant will scald you. Relief pressure valve begins to open at 1.1 kgf/cm ACCESSORIES AND LOADING WARNING LABEL WARNING ED, II ED type ACCESSORIES AND LOADING •...
  • Page 14 20200103191036_32MKR8000_eng_BOOK Page 14 Friday, January 03 2020 19:24:26 JST Image Labels REAR CUSHION LABEL CBR1000ST GAS FILLED Do not open. Do not heat. TYRE INFORMATION & DRIVE CHAIN LABEL Cold tyre pressure: [Driver only] Front 250 kPa (2.50 kgf/cm , 36 psi) Rear 290 kPa (2.90 kgf/cm...
  • Page 15 20200103191036_32MKR8000_eng_BOOK Page 15 Friday, January 03 2020 19:24:26 JST Image Labels ED, II ED type SAFETY REMINDER LABEL For your protection, always wear helmet, protective apparel. FUEL LABEL ED, II ED, U, II U type U, II U type Unleaded petrol only ETHANOL up to 10 % by volume Research Octane Number (RON) 95 or higher II GS type...

  • Page 16: Safety Precautions

    20200103191036_32MKR8000_eng_BOOK Page 16 Friday, January 03 2020 19:24:26 JST Safety Precautions Safety Precautions Helmet Safety-standard certified, high-visibility, correct Ride cautiously and keep your hands on the size for your head ● handlebars and feet on the footpegs. Must fit comfortably but securely, with the ●...
  • Page 17 20200103191036_32MKR8000_eng_BOOK Page 17 Friday, January 03 2020 19:24:26 JST Safety Precautions Gloves Full-finger leather gloves with high abrasion resistance Boots or Riding Shoes Sturdy boots with non-slip soles and ankle protection Jacket and Trousers Protective, highly visible, long-sleeved jacket and durable trousers for riding (or a protective suit)

  • Page 18: Riding Precautions

    20200103191036_32MKR8000_eng_BOOK Page 18 Friday, January 03 2020 19:24:26 JST Riding Precautions Riding Precautions Exercise caution on low traction surfaces. ● The tyres slip more easily on such surfaces and braking distances are Running-in Period longer. During the first 500 km (300 miles) of running, Avoid continuous braking.
  • Page 19 20200103191036_32MKR8000_eng_BOOK Page 19 Friday, January 03 2020 19:24:26 JST Riding Precautions Anti-lock Brake System (ABS) Engine Braking This model is equipped with an Anti-lock Brake Engine braking helps slow your vehicle down System (ABS) designed to help prevent the when you release the throttle. For further brakes from locking up during hard braking.
  • Page 20 P. 102 and other high-temperature parts until they Then, leave your vehicle while taking the cool down. Honda SMART Key with you. Deactivate the To reduce the likelihood of theft, always lock ● Honda SMART Key system if necessary. the handlebars ( P.
  • Page 21 20200103191036_32MKR8000_eng_BOOK Page 21 Friday, January 03 2020 19:24:26 JST Riding Precautions Refuelling and Fuel Guidelines Follow these guidelines to protect the engine, fuel system and catalytic converter: Use only unleaded petrol. ● Use recommended octane number. Using ● lower octane petrol will result in decreased engine performance.
  • Page 22 Torque Control may not compensate for rough Honda selectable torque control road conditions or rapid throttle operation. When the Honda selectable torque control Always consider road and weather conditions, (Torque Control) detects rear wheel spin during as well as your skills and condition, when acceleration, the system will limit the amount of applying throttle.

  • Page 23: Accessories & Modifications

    We strongly advise that you do not add any seriously hurt or killed. accessories that were not specifically designed for your vehicle by Honda or make Follow all instructions in this owner's modifications to your vehicle from its original manual regarding accessories and design.

  • Page 24: Loading

    20200103191036_32MKR8000_eng_BOOK Page 24 Friday, January 03 2020 19:24:26 JST Loading Loading WARNING Overloading or improper loading can Carrying extra weight affects your vehicle's ● cause a crash and you can be seriously handling, braking and stability. hurt or killed. Always ride at a safe speed for the load you are carrying.
  • Page 25 20200103191036_32MKR8000_eng_BOOK Page 25 Friday, January 03 2020 19:24:26 JST Parts Location CBR1000ST Tool kit/Owner's manual (P.126) Fuse box (P.220) Battery (P.150) Front brake fluid reservoir (P.164) Front brake lever (P.177) Throttle grip (P.175) Front suspension spring preload adjuster (P.179) Under cowl (P.155)
  • Page 26 20200103191036_32MKR8000_eng_BOOK Page 26 Friday, January 03 2020 19:24:26 JST Clutch lever (P.172) Front suspension rebound damping/compression damping adjuster (P.180) (P.181) Fuel fill cap (P.124) Front seat (P.153) Rear seat (P.154) Rear suspension compression damping adjuster (P.184) Rear suspension rebound damping adjuster (P.183) Drive chain (P.168)
  • Page 27 20200103191036_32MKR8000_eng_BOOK Page 27 Friday, January 03 2020 19:24:26 JST Parts Location (Continued) CBR1000SP Tool kit/Owner's manual (P.126) Fuse box (P.220) Battery (P.150) Front brake fluid reservoir (P.164) Front brake lever (P.177) Throttle grip (P.175) Under cowl (P.155) Engine oil filter (P.159) Engine oil drain bolt (P.159)
  • Page 28 20200103191036_32MKR8000_eng_BOOK Page 28 Friday, January 03 2020 19:24:26 JST Clutch lever (P.172) Front suspension spring preload adjuster (P.186) Fuel fill cap (P.124) Front seat (P.153) Rear seat (P.154) Drive chain (P.168) Rear suspension spring preload adjuster (P.188) Shift lever (P.117) Side stand (P.167) Coolant reserve tank...
  • Page 29 20200103191036_32MKR8000_eng_BOOK Page 29 Friday, January 03 2020 19:24:26 JST Instruments The display type consists of the following 5 patterns. • ANALOG (P.27) • DIGITAL (P.28) • BAR (P.29) • NO REV (P.30) • PRACTICE (P.31) To change the display type: (P.63) (P.75) Each display type has the SPORT mode.
  • Page 30 (P.55) To set the clock: Tachometer (P.63) (P.84) NOTICE Do not operate the engine in the tachometer red zone. HESD (Honda Excessive engine speed can adversely affect engine life. Electronic Steering Tachometer red zone Damper) indicator (excessive engine rpm range) (P.55)
  • Page 31 NOTICE Do not operate the engine in the tachometer red zone. Pop-up information (P.52) Excessive engine speed can adversely affect engine life. ABS mode indicator HESD (Honda Electronic Steering (P.55) Damper) indicator (P.55) Low oil pressure indicator High beam indicator (P.55)
  • Page 32 Display type: BAR Low oil pressure High coolant temperature indicator (P.55) indicator (P.55) Tachometer HESD (Honda Electronic NOTICE Steering Damper) Do not operate the engine in the tachometer red zone. indicator (P.55) Excessive engine speed can adversely affect engine life.
  • Page 33 20200103191036_32MKR8000_eng_BOOK Page 33 Friday, January 03 2020 19:24:26 JST Instruments (Continued) Display type: NO REV HESD (Honda Electronic Steering Damper) indicator (P.55) Clock Low oil pressure indicator (P.55) To set the clock: High coolant temperature indicator (P.55) (P.63) (P.84) ABS mode indicator (P.55)
  • Page 34 20200103191036_32MKR8000_eng_BOOK Page 34 Friday, January 03 2020 19:24:26 JST Display type: PRACTICE High beam indicator Reserve fuel mode HESD (Honda Electronic Steering (P.49) Damper) indicator (P.55) Tachometer NOTICE Low oil pressure Do not operate the engine in the tachometer red zone.
  • Page 35 20200103191036_32MKR8000_eng_BOOK Page 35 Friday, January 03 2020 19:24:26 JST Instruments (Continued) SPORT mode display To change to the SPORT mode display: Set the “LAP” to “ON” in setting mode. (P.63) (P.75) To return to the STD mode display, set the “LAP” to “OFF” in setting mode. When switching to SPORT mode display, the following message appears on the screen for a few seconds then the lap timer is displayed.
  • Page 36 20200103191036_32MKR8000_eng_BOOK Page 36 Friday, January 03 2020 19:24:26 JST Basic Operations You can operate and set the various functions of the display using the switches on the left handlebar. PASSING/LAP switch Sel up switch switch MODE Sel left/right switch Sel down switch Continued...
  • Page 37 20200103191036_32MKR8000_eng_BOOK Page 37 Friday, January 03 2020 19:24:26 JST Instruments (Continued) When switching or setting the display, refer to the switch operation guide is displayed. Switch operation guide Type of the switch operation guide: : Press the sel up switch : Press the sel down switch : Push the...
  • Page 38 20200103191036_32MKR8000_eng_BOOK Page 38 Friday, January 03 2020 19:24:26 JST INFO area To switch the INFO area To change the page of the INFO area, push the sel left/right switch. You can change the information items to be displayed on the pages 1-3 (INFO 1-3). You can also change the number of items to be displayed in the information area.
  • Page 39 20200103191036_32MKR8000_eng_BOOK Page 39 Friday, January 03 2020 19:24:26 JST Instruments (Continued) The following items are types of information that can be displayed on pages 1-3 (INFO 1-3). TOTAL CBR logo (P.37) (P.41) TRIP A SHIFT POINT (P.37) (P.42) TRIP A CONS. LAP CONS.
  • Page 40 20200103191036_32MKR8000_eng_BOOK Page 40 Friday, January 03 2020 19:24:26 JST Odometer [TOTAL] Tripmeter A/B [TRIP A/B] Total distance ridden. Distance ridden since the tripmeter was reset. When “------” is displayed, go to your dealer When “----.-” is displayed, go to your dealer for service.
  • Page 41 20200103191036_32MKR8000_eng_BOOK Page 41 Friday, January 03 2020 19:24:26 JST Instruments (Continued) Tripmeter A fuel consumption [TRIP A Current fuel mileage [INST. CONS.] CONS.] Displays the current instant fuel mileage. Displays the tripmeter A fuel consumption Display range: 0.0 to 299.9 L/100km (km/L, since the tripmeter A was reset.
  • Page 42 20200103191036_32MKR8000_eng_BOOK Page 42 Friday, January 03 2020 19:24:26 JST Average fuel mileage [AVG. CONS.] Average speed [AVG. SPD.] Displays the average fuel mileage since the Displays the average speed since the average average fuel mileage was reset. speed was reset. Display range: 0.0 to 299.9 L/100km (km/L, Display range: 0 to 350 km/h (0 to 218 mph) mile/gal or mile/L)
  • Page 43 20200103191036_32MKR8000_eng_BOOK Page 43 Friday, January 03 2020 19:24:26 JST Instruments (Continued) Elapsed time [ELAPSED] Numerical tachometer display [REV] Displays the engine operating time since the Displays the engine revolutions per minutes. elapsed time was reset. Display range: 0 to 16,500 r/min Display range: 00:00 to 99:59 (hours:minutes) Above 16,500 r/min (rpm): “16500”...
  • Page 44 20200103191036_32MKR8000_eng_BOOK Page 44 Friday, January 03 2020 19:24:26 JST Battery voltage [VOLTAGE] User letter Displays the current voltage. Displays the characters of user's choice. Date [DATE] To set the USER LETTER: (P.63) (P.82) Show the date of today. CBR logo Displays the CBR logo.
  • Page 45 20200103191036_32MKR8000_eng_BOOK Page 45 Friday, January 03 2020 19:24:26 JST Instruments (Continued) Shift indicator set value [SHIFT POINT] Lap fuel consumption [LAP CONS.] Displays the shift indicator set value. Displays the fuel consumption of the latest Display range: 5,000 - 16,500 r/min lap.
  • Page 46 20200103191036_32MKR8000_eng_BOOK Page 46 Friday, January 03 2020 19:24:26 JST Lap average fuel mileage [LAP AVG. Lap average speed [LAP AVG. SPD.] CONS.] Displays the average speed of the latest lap. Displays the average fuel mileage of the Display range: 0 to 350 km/h (0 to 218 mph) latest lap.
  • Page 47 20200103191036_32MKR8000_eng_BOOK Page 47 Friday, January 03 2020 19:24:26 JST Instruments (Continued) Maximum acceleration in this time Maximum right lean angle in this time [MAX ACC.] [MAX LEAN ANGLE R] Displays the maximum acceleration since the Displays the maximum lean angle of right engine was started.
  • Page 48 20200103191036_32MKR8000_eng_BOOK Page 48 Friday, January 03 2020 19:24:26 JST Fuel consumption in this time [FUEL Average fuel mileage in this time [AVG. CONS.] CONS. Displays the fuel consumption since the Displays the average fuel mileage since the engine was started. engine was started.
  • Page 49 20200103191036_32MKR8000_eng_BOOK Page 49 Friday, January 03 2020 19:24:26 JST Instruments (Continued) Average speed in this time [AVG. SPD. Elapsed time in this time [ELAPSED Displays the engine operating time since the Displays the average speed since the engine engine was started. was started.
  • Page 50 20200103191036_32MKR8000_eng_BOOK Page 50 Friday, January 03 2020 19:24:26 JST Blank display To Reset the Information Display the blank. Select the page (INFO1, 2, 3) of INFO area that contains the item you want to reset with sel left/right switch. Push and hold the of the sel left/ right switch until the RESET turns to red.
  • Page 51 20200103191036_32MKR8000_eng_BOOK Page 51 Friday, January 03 2020 19:24:26 JST Instruments (Continued) EQUALIZER Displays the current lean angle of left/right side. Displays the current acceleration/ deceleration.
  • Page 52 20200103191036_32MKR8000_eng_BOOK Page 52 Friday, January 03 2020 19:24:26 JST Reserve Fuel Mode Available driving When the low fuel indicator appears the distance available driving distance and amount of remaining fuel displayed. You should refill the tank as soon as possible. Remaining fuel amount turned to the reserve fuel mode: 3.5 L (0.9 US gal, 0.7 Imp gal) Low fuel indicator...
  • Page 53 20200103191036_32MKR8000_eng_BOOK Page 53 Friday, January 03 2020 19:24:26 JST Instruments (Continued) Available driving distance (Only reserve Amount of remaining fuel (Only reserve fuel mode) fuel mode) When the low fuel indicator lights, the When the low fuel indicator lights, the estimated available driving distance is estimated amount of remaining fuel can be indicated.
  • Page 54 20200103191036_32MKR8000_eng_BOOK Page 54 Friday, January 03 2020 19:24:26 JST Coolant temperature gauge ( Display range: 35°C to 132°C 34°C or less: “---” is displayed. ● Between 122°C and 131°C: ● High coolant temperature indicator lights. Coolant temperature digits flash. Above 132°C: ●...
  • Page 55 20200103191036_32MKR8000_eng_BOOK Page 55 Friday, January 03 2020 19:24:26 JST Instruments (Continued) Pop-up information When your vehicle has multiple pieces of In the following cases, pop-up information is information, the high-priority pop-up displayed. information display will appear. Maintenance information: If the priorities are the same, pop-up ●...
  • Page 56 20200103191036_32MKR8000_eng_BOOK Page 56 Friday, January 03 2020 19:24:26 JST Maintenance Information Indication Explanation Remedy When the periodic inspection Have your vehicle inspected by time of your vehicle is your dealer. approaching. When the oil change time of your Change the engine oil. (P.159) vehicle is approaching.
  • Page 57 20200103191036_32MKR8000_eng_BOOK Page 57 Friday, January 03 2020 19:24:26 JST Instruments (Continued) Start Mode Information Indication Explanation Remedy When the background colour is: Orange: Start mode is allowed. To use the start mode (P.63) Green: Limiting the engine (P.74) (P.119) revolution. Gray: Start mode is not allowed.
  • Page 58 If it comes on while engine is running: (P.198) ABS mode indicator [ABS 1/2] Displays the current ABS mode. HESD (Honda Electronic Steering ABS 1 is suitable for track riding. Damper) indicator ABS 2 is suitable for street riding or winding If it comes on while engine is running: roads.
  • Page 59 20200103191036_32MKR8000_eng_BOOK Page 59 Friday, January 03 2020 19:24:26 JST Instruments (Continued) Quick Shifter indicator CBR1000SP Displays the current status of the Quick Shifter. This indicator is displayed when the INFO area is in page 4 (Riding mode). Quick Shifter system is disabled. Quick Shifter upshifting is enabled.
  • Page 60 20200103191036_32MKR8000_eng_BOOK Page 60 Friday, January 03 2020 19:24:26 JST Lap Timer You can record lap time in the SPORT mode. (P.63) (P.75) Previous lap time Number of laps Stopwatch/difference with the best lap Continued...
  • Page 61 20200103191036_32MKR8000_eng_BOOK Page 61 Friday, January 03 2020 19:24:26 JST Instruments (Continued) You can check and clear the recorded lap data in the setting mode. (P.63) (P.83) Best icon Time stamp (Displayed when the fastest lap User letter time displayed.) Lap number Lap time Maximum vehicle speed Maximum deceleration...
  • Page 62 20200103191036_32MKR8000_eng_BOOK Page 62 Friday, January 03 2020 19:24:26 JST The lap data include the following: Lap data Display range 0 to 99 Previous lap number Exceeds 99, repeats the “99” Previous lap time 00'00"00 to 99'59"99 Stopwatch 00'00"00 to 99'59"99 Difference with the best lap -99'59"99 to 00'00"00 to +99'59"99 Maximum vehicle speed...
  • Page 63 20200103191036_32MKR8000_eng_BOOK Page 63 Friday, January 03 2020 19:24:26 JST Instruments (Continued) To record lap time, press the PASSING/LAP To Measure the Lap Time switch at each lap. Set the “LAP” to “ON” in setting mode. The stopwatch changes to display of the (P.63) (P.75) difference with the best lap.
  • Page 64 20200103191036_32MKR8000_eng_BOOK Page 64 Friday, January 03 2020 19:24:26 JST To restart the measurement Previous lap time Press the PASSING/LAP switch again. The stopwatch restarts measurement. Measurement starts from the next lap. To Check or Clear the Lap Time Select the “LAP DATA” menu in the setting mode.
  • Page 65 20200103191036_32MKR8000_eng_BOOK Page 65 Friday, January 03 2020 19:24:26 JST Instruments (Continued) Setting mode To shift to the setting mode Push and hold the of the sel left/right switch. To select the desired setting menu, operate the sel up switch, sel down switch, sel left/right switch on the left handle.
  • Page 66 20200103191036_32MKR8000_eng_BOOK Page 66 Friday, January 03 2020 19:24:26 JST Setting flow Ordinary display MODE Setting mode RIDING MODE (P.67) SUSPENSION A MODE (P.68) SUSPENSION M MODE (P.69) QUICK SHIFTER (P.70) FUNCTION STEERING DAMPER (P.71) ABS MODE (P.72) REV INDICATOR (P.73) Push/Press START MODE REV (P.74)
  • Page 67 20200103191036_32MKR8000_eng_BOOK Page 67 Friday, January 03 2020 19:24:26 JST Instruments (Continued) FUNCTION DISPLAY CUSTOMIZE (P.75) MECHANIC (P.78) BRIGHTNESS (P.79) DISPLAY BACKGROUND (P.80) FAVORITE INFORMATION (P.81) USER LETTER (P.82) GENERAL Push/Press Push and hold/ Press and hold...
  • Page 68 20200103191036_32MKR8000_eng_BOOK Page 68 Friday, January 03 2020 19:24:26 JST DISPLAY LAP DATA (P.83) DATE & TIME (P.84) GENERAL UNIT (P.85) LANGUAGE (P.86) RESTORE DEFAULT (P.86) SERVICE Push/Press Push and hold/ Press and hold Continued...
  • Page 69 20200103191036_32MKR8000_eng_BOOK Page 69 Friday, January 03 2020 19:24:26 JST Instruments (Continued) GENERAL MAINTENANCE (P.88) EQUIPMENT (P.91) QS INITIALIZE (P.91) SERVICE (P.92) RACE KIT ECU (P.92) USE HISTORY Push/Press Push and hold/ Press and hold...
  • Page 70 Select to the desired setting according to the switch operation guide. CBR1000ST "S" (suspension mode) is not displayed. Return to the ordinary display or upper hierarchy to complete the setting. Default setting mark...
  • Page 71 20200103191036_32MKR8000_eng_BOOK Page 71 Friday, January 03 2020 19:24:26 JST Instruments (Continued) SUSPENSION A MODE (P.189) CBR1000SP You can change the levels of OBTi support items. Adjusting the ÖHLINS Smart EC system (P.185) Select the "A 1", "A 2" or "A 3" using the Default setting mark sel up or sel down switch.
  • Page 72 20200103191036_32MKR8000_eng_BOOK Page 72 Friday, January 03 2020 19:24:26 JST To return to the initialize settings: SUSPENSION M MODE (P.192) Push and hold the of the sel left/ CBR1000SP right switch. You can adjust the compression and Reset the setting according to the switch rebound damping of the front and rear operation guide.
  • Page 73 20200103191036_32MKR8000_eng_BOOK Page 73 Friday, January 03 2020 19:24:26 JST Instruments (Continued) Select the "UP" or "DOWN" using the QUICK SHIFTER up or sel down switch. CBR1000SP Select to the desired setting according to You can change the setting of the Quick the switch operation guide.
  • Page 74 20200103191036_32MKR8000_eng_BOOK Page 74 Friday, January 03 2020 19:24:26 JST STEERING DAMPER You can change the damping level of the steering damper. The steering damping level can be selected from "SOFT", "MEDIUM" or "HARD". Each level's characteristics SOFT: More agile steering feel. (Default setting level) MEDIUM: Medium steering damping level between "SOFT"...
  • Page 75 20200103191036_32MKR8000_eng_BOOK Page 75 Friday, January 03 2020 19:24:26 JST Instruments (Continued) ABS MODE You can change the ABS mode. The ABS mode can be selected from the "ABS1 (TRACK)" or "ABS2 (SPORT)". Select the "ABS1 (TRACK)" or "ABS2 (SPORT)" using the sel up or down switch.
  • Page 76 20200103191036_32MKR8000_eng_BOOK Page 76 Friday, January 03 2020 19:24:26 JST BRIGHTNESS REV INDICATOR You can adjust the shift indicator brightness. You can change the setting of the shift Available setting range: OFF or 1 - 8 indicators. When "OFF" is selected, the shift indicator is deactivated.
  • Page 77 20200103191036_32MKR8000_eng_BOOK Page 77 Friday, January 03 2020 19:24:26 JST Instruments (Continued) START MODE REV You can change the engine revolutions when using the start mode. To use the start mode: (P.119) Available setting range: OFF or 6,000 - 9,000 r/min (rpm) Select the engine revolutions using the sel up or sel down switch.
  • Page 78 20200103191036_32MKR8000_eng_BOOK Page 78 Friday, January 03 2020 19:24:26 JST To use a registered display setting as DISPLAY CUSTOMIZE the ordinary display: You can register 3 patterns of display settings Select the desired screen setting from the and use them as ordinary displays. "01", "02"...
  • Page 79 20200103191036_32MKR8000_eng_BOOK Page 79 Friday, January 03 2020 19:24:26 JST Instruments (Continued) To edit and register the display: Select the "EDIT" according to the switch operation guide. Select the "DISPLAY TYPE", "REV STYLE", "LAP" or "INFO" using the sel up or sel down switch.
  • Page 80 20200103191036_32MKR8000_eng_BOOK Page 80 Friday, January 03 2020 19:24:26 JST To edit the display name: Display name You can edit the display name with up to 10 characters. Select the "EDIT" according to the switch operation guide. Push and hold the of the sel left/ right switch.
  • Page 81 20200103191036_32MKR8000_eng_BOOK Page 81 Friday, January 03 2020 19:24:26 JST Instruments (Continued) MECHANIC Displays the current information of the vehicle. Displays the following information: Tachometer ● Gear position ● Throttle grip position ● Coolant temperature ● Battery voltage ● Tachometer Gear Throttle grip position position...
  • Page 82 20200103191036_32MKR8000_eng_BOOK Page 82 Friday, January 03 2020 19:24:26 JST BRIGHTNESS You can adjust the backlight brightness to one of the eight levels or select the auto adjustment. Automatic brightness control: (P.229) The display can become dark when the display is very hot. If it does not restore the original brightness, contact your dealer.
  • Page 83 20200103191036_32MKR8000_eng_BOOK Page 83 Friday, January 03 2020 19:24:26 JST Instruments (Continued) BACKGROUND You can change the setting of the background to one of the two categories or select the auto adjustment. Automatic Background Control: (P.229) Select the "AUTO", "BLACK" or "WHITE" using the sel up or sel down switch.
  • Page 84 20200103191036_32MKR8000_eng_BOOK Page 84 Friday, January 03 2020 19:24:26 JST The number of items displayed on the INFO FAVORITE INFORMATION area changes according to the "DISPLAY You can change the types of information CUSTOMIZE" setting. displayed in "INFO1", "INFO2", and "INFO3" (P.63) (P.75) of the INFO area.
  • Page 85 20200103191036_32MKR8000_eng_BOOK Page 85 Friday, January 03 2020 19:24:26 JST Instruments (Continued) USER LETTER You can edit the USER LETTER with up to 10 characters. Select the "USER LETTER". Edit the USER LETTER. To select the character using the up switch, sel down switch, and sel left/right switch.
  • Page 86 20200103191036_32MKR8000_eng_BOOK Page 86 Friday, January 03 2020 19:24:26 JST To clear the recorded lap data: LAP DATA Push and hold the of the sel left/ You can check and clear the recorded lap right switch. data. Reset the lap data according to the switch If there is no lap data, "LAP DATA"...
  • Page 87 20200103191036_32MKR8000_eng_BOOK Page 87 Friday, January 03 2020 19:24:26 JST Instruments (Continued) DATE & TIME Select the "24h or 12h", "YEAR", "MONTH / DAY", "HOUR / MINUTE" or "am / pm" using sel up or sel down switch. Select to the desired setting according to the switch operation guide.
  • Page 88 20200103191036_32MKR8000_eng_BOOK Page 88 Friday, January 03 2020 19:24:26 JST If you want to select "L/100km" or "km/L" for UNIT fuel consumption, "km/h" must be selected in ED, II ED, II GS type the "SPEED" menu in advance. You can change the speed and mileage, and When "mph"...

  • Page 89: Operation Guide

    20200103191036_32MKR8000_eng_BOOK Page 89 Friday, January 03 2020 19:24:26 JST Instruments (Continued) LANGUAGE RESTORE DEFAULT Changes the system language. The set values can be returned to the default settings. Select the "English" or "Turkish" using the sel up or sel down switch. Return to the ordinary display or upper Reset the settings according to the switch hierarchy to complete the setting.
  • Page 90 20200103191036_32MKR8000_eng_BOOK Page 90 Friday, January 03 2020 19:24:26 JST The following items are restored to their • INFO selection page default values: • ABS MODE • CBR1000SP • LANGUAGE QUICK SHIFTER • CBR1000SP SUSPENSION A/M MODE • LAP DATA • DISPLAY CUSTOMIZE •...
  • Page 91 20200103191036_32MKR8000_eng_BOOK Page 91 Friday, January 03 2020 19:24:26 JST Instruments (Continued) Display range: MAINTENANCE DISTANCE: You can check the next inspection time and Next periodic inspection: change the setting of next inspection. -----, 12,875 to -99,999 km Next periodic inspection -----, (8,000 to -99,999 mile) Next engine oil change: -----, 12,875 to -99,999 km...
  • Page 92 20200103191036_32MKR8000_eng_BOOK Page 92 Friday, January 03 2020 19:24:26 JST When reaching any of the following, the pop-up information is appears in the ordinary display. (P.52) “500 km” or “300 mile” from the next ● periodic inspection. “100 km” or “60 mile” from the next ●...
  • Page 93 20200103191036_32MKR8000_eng_BOOK Page 93 Friday, January 03 2020 19:24:26 JST Instruments (Continued) Next inspection setting Select to the desired setting according to the switch operation guide. Select “ ” (periodic inspection ) or “ ” If you press and hold the sel up or (engine oil change) using the sel up or...
  • Page 94 20200103191036_32MKR8000_eng_BOOK Page 94 Friday, January 03 2020 19:24:26 JST EQUIPMENT QS INITIALIZE "EQUIPMENT" is displayed but not selectable. "QS INITIALIZE" is displayed but not selectable. Continued...
  • Page 95 20200103191036_32MKR8000_eng_BOOK Page 95 Friday, January 03 2020 19:24:26 JST Instruments (Continued) RACE KIT ECU USE HISTORY Displays a current problem with the vehicle. “RACE KIT ECU USE HISTORY” is displayed If your vehicle has problem, DTC index is but not usable. displayed.
  • Page 96 20200103191036_32MKR8000_eng_BOOK Page 96 Friday, January 03 2020 19:24:26 JST Indicators If one of these indicators does not come on when it should, have your dealer check for problems. Shift indicators (P.96) Comes on briefly when the electrical system is turned on. Right Turn Signal Indicator Torque Control indicator Comes on when the electrical system is turned...
  • Page 97 20200103191036_32MKR8000_eng_BOOK Page 97 Friday, January 03 2020 19:24:26 JST Indicators (Continued) PGM-FI (Programmed Fuel Injection) malfunction indicator lamp (MIL) Comes on briefly when the electrical system is turned on. If it comes on while engine is running: (P.198) ABS (Anti-lock Brake System) indicator Comes on when the electrical system is turned on.
  • Page 98 Comes on when the transmission is in Neutral. Honda SMART Key indicator Comes on briefly when the electrical system is turned When the Honda SMART Key Indicator Flashes: (P.201) Steering lock indicator Comes on briefly while the steering lock is activating.
  • Page 99 20200103191036_32MKR8000_eng_BOOK Page 99 Friday, January 03 2020 19:24:26 JST Indicators (Continued) Shift Indicators The indicator colours are as follows. The shift indicators light or blink by the engine revolutions. The timing and brightness of the indicators light/blink depend on the "REV INDICATOR" White Blue setting.
  • Page 100 20200103191036_32MKR8000_eng_BOOK Page 100 Friday, January 03 2020 19:24:26 JST...
  • Page 101 20200103191036_32MKR8000_eng_BOOK Page 101 Friday, January 03 2020 19:24:26 JST Switches Headlight dimmer switch/PASSING/LAP switch • : High beam • : Low beam • /LAP: Flashes the high beam headlight. Also use lap timer. (P.57) Horn button Hazard switch Switchable when the electrical system is on. Can be turned to off regardless of whether the electrical system is on or off.
  • Page 102 20200103191036_32MKR8000_eng_BOOK Page 102 Friday, January 03 2020 19:24:26 JST Ignition Switch (Lock) Locks steering. (P.102) Switches the electrical system on/off, locks the steering. Make sure that the Honda SMART Key is activated and enter the (P.105) (Off) Turns engine off. operating range.
  • Page 103 20200103191036_32MKR8000_eng_BOOK Page 103 Friday, January 03 2020 19:24:26 JST Switches (Continued) These switches are used for operating and setting the display. (P.33) Sel up switch Sel left/right switch Sel down switch switch MODE Engine stop switch/ Start button Should normally remain in the (Run) position.
  • Page 104 To retract the mechanical key Push the key into the key case while pressing the release button. ON/OFF button This button is used to activate or deactivate the Honda SMART Key system and also to confirm the activation status. (P.105) Mechanical key Continued...
  • Page 105 20200103191036_32MKR8000_eng_BOOK Page 105 Friday, January 03 2020 19:24:26 JST Switches (Continued) Steering Lock Locking Turn the ignition switch knob (Off/ Lock the steering when parking to help Lock) counterclockwise to turn off the prevent theft. electrical system. A U-shaped wheel lock or similar device is Turn the handlebars all the way to the left.
  • Page 106 20200103191036_32MKR8000_eng_BOOK Page 106 Friday, January 03 2020 19:24:26 JST Turn and hold the ignition switch knob Unlocking (Off/Lock) counterclockwise. Make sure that the Honda SMART Key is The steering lock indicator comes on activated and enter the operating (P.105) briefly and the steering is automatically range.
  • Page 107 The system runs a two-way authentication between the vehicle and the Honda SMART Key to verify if it is the registered Honda SMART Key. The Honda SMART Key system uses low- intensity radio waves. It may affect medical...
  • Page 108 To check the Honda SMART Key ON/OFF button system status Lightly press the ON/OFF button. The LED of the Honda SMART Key will show the status. When the LED of the Honda SMART Key is: Green: Honda SMART Key system (activation) authentication can be performed.
  • Page 109 (Continued) Operating Range The system can be operated when the The Honda SMART Key system uses low- Honda SMART Key is within the shaded area intensity radio waves. Therefore the shown in the illustration. operating range may become wider or...
  • Page 110 20200103191036_32MKR8000_eng_BOOK Page 110 Friday, January 03 2020 19:24:26 JST Anyone can operate the ignition switch and Anyone in possession of the Honda SMART start the engine if your Honda SMART Key is Key can perform the following operations if within operating range of your vehicle, even...
  • Page 111 (P.102) Operating the Ignition Switch To Activate the Electrical System Make sure that the Honda SMART Key is activated and enter the operating range for To turn Off the Electrical System the vehicle. (P.105) Push the ignition (On) switch.
  • Page 112 20200103191036_32MKR8000_eng_BOOK Page 112 Friday, January 03 2020 19:24:26 JST Riding mode You can change the riding mode. Current riding mode The riding mode consists of the following parameters. T value P: Engine output level P value T: Torque control level W: Wheelie control level W value EB: Engine brake level...
  • Page 113 20200103191036_32MKR8000_eng_BOOK Page 113 Friday, January 03 2020 19:24:26 JST Riding mode (Continued) Riding mode has three modes. Available riding mode: MODE 1, MODE 2 or MODE 3. Each value can be changed. CBR1000SP Setting of S mode can be changed. Initial setting S mode Riding modes...
  • Page 114 20200103191036_32MKR8000_eng_BOOK Page 114 Friday, January 03 2020 19:24:26 JST P value (Engine output level) W value (Wheelie control level) P value has five setting levels. W value has four setting levels. Available setting range: 1 to 5 Available setting range: 1 to 3 Level 1 has the most power.
  • Page 115 20200103191036_32MKR8000_eng_BOOK Page 115 Friday, January 03 2020 19:24:26 JST Riding mode (Continued) Selecting the riding mode The riding mode changes each time the switch is pressed. MODE When the riding mode is changed the P, T, W, and EB values are appeared briefly in the INFO area.
  • Page 116 20200103191036_32MKR8000_eng_BOOK Page 116 Friday, January 03 2020 19:24:26 JST Setting the riding mode Select the riding mode you want to set. CBR1000ST (P.112) To change the type of parameter You can change the P, T, W and EB values. displayed in FAVORITE...
  • Page 117 20200103191036_32MKR8000_eng_BOOK Page 117 Friday, January 03 2020 19:24:26 JST Riding mode (Continued) Sel up switch Sel down switch Press and hold the sel up switch CBR1000SP Press and hold the sel down switch Press the sel up switch Press the sel down switch...
  • Page 118 10 seconds before trying is cold or warm. to start the engine again to recover battery voltage. This vehicle is equipped with a Honda • Extended fast idling and revving the engine can SMART Key system. Always keep Honda damage the engine, and the exhaust system.
  • Page 119 20200103191036_32MKR8000_eng_BOOK Page 119 Friday, January 03 2020 19:24:26 JST Starting the Engine (Continued) If the engine does not start: Open the throttle fully and press the start button for 5 seconds. Repeat the normal starting procedure. If the engine starts, open the throttle slightly if idling is unstable.
  • Page 120 20200103191036_32MKR8000_eng_BOOK Page 120 Friday, January 03 2020 19:24:26 JST Shifting Gears Your vehicle transmission has 6 forward If you put the vehicle in gear with the side gears in a one-down, five-up shift pattern. stand down, the engine will shut off. Continued...
  • Page 121 20200103191036_32MKR8000_eng_BOOK Page 121 Friday, January 03 2020 19:24:26 JST Shifting Gears (Continued) Quick Shifter The Quick Shifter can be individually ● turned ON (active) and OFF (deactivate), CBR1000SP This system enables very quick up and down also the shift pedal load level for shifting without clutch and throttle activating the Quick Shifter can be operations.
  • Page 122 20200103191036_32MKR8000_eng_BOOK Page 122 Friday, January 03 2020 19:24:26 JST Start Mode Your vehicle controls the engine torque to To set the start mode support optimal acceleration from standstill. Start the engine. (P.115) Stop the vehicle completely. Set to the SPORT mode. (P.63) (P.75) WARNING Press and hold the...
  • Page 123 20200103191036_32MKR8000_eng_BOOK Page 123 Friday, January 03 2020 19:24:26 JST Start Mode (Continued) In the following cases, pop-up information of Start the vehicle with the throttle fully open. "START MODE" with gray background The engine revolution is limited by the set value of "START MODE REV", the appears, system is not allowed.
  • Page 124 20200103191036_32MKR8000_eng_BOOK Page 124 Friday, January 03 2020 19:24:26 JST After the vehicle has started, the system is deactivated under one of the following conditions. Reach the 3rd gear. ● Reach the engine revolution of the shift ● indicator limit value in 1st gear. (P.63) (P.73) Reach the lean angle is more than 20...
  • Page 125 20200103191036_32MKR8000_eng_BOOK Page 125 Friday, January 03 2020 19:24:26 JST Emergency Stop Signal Emergency stop signal activates when the The emergency stop signal stops operating system detects hard braking about when: 50 km/h (31 mph) or above to alert drivers You release the brakes. ●...
  • Page 126 20200103191036_32MKR8000_eng_BOOK Page 126 Friday, January 03 2020 19:24:26 JST The emergency stop signal is not a system that can prevent a possible rear-end collision caused by your hard braking. It is always recommended to avoid hard braking unless it is absolutely necessary. The emergency stop signal does not activate with the hazard switch pressed in.
  • Page 127 20200103191036_32MKR8000_eng_BOOK Page 127 Friday, January 03 2020 19:24:26 JST Refuelling Opening the Fuel Fill Cap Fuel fill cap Lock cover Open the lock cover, insert the mechanical Level plate key, and turn it clockwise to open the fuel fill cap. Closing the Fuel Fill Cap After refuelling, push the fuel fill cap closed until it locks.
  • Page 128 20200103191036_32MKR8000_eng_BOOK Page 128 Friday, January 03 2020 19:24:26 JST Storage Equipment WARNING Helmet Holder The helmet holders are located underside of Riding with a helmet attached to the the rear seat. holder can interfere with your ability to safely operate the vehicle and could Helmet holder lead to a crash in which you can be seriously hurt or killed.
  • Page 129 20200103191036_32MKR8000_eng_BOOK Page 129 Friday, January 03 2020 19:24:26 JST Storage Equipment (Continued) Tool kit/Owner's manual Removing the Rear Seat (P.154) The tool kit is located under the rear seat. The owner's manual is stored in the tool bag. Tool kit Owner's manual...

  • Page 130: Maintenance

    Rear Seat ............. P. 154 Adjusting the ÖHLINS Smart EC System..P. 185 Under Cowl............P. 155 Other Replacement......... P. 193 Engine Oil ............P. 157 Replacing the Honda SMART Key Battery .. P. 193 Coolant .............. P. 161 Brakes..............P. 164...

  • Page 131: Importance Of Maintenance

    20200103191036_32MKR8000_eng_BOOK Page 131 Friday, January 03 2020 19:24:26 JST Importance of Maintenance Importance of Maintenance Maintenance Safety Keeping your vehicle well-maintained is Always read the maintenance instructions absolutely essential to your safety and to before you begin each task, and make sure that protect your investment, obtain maximum you have the tools, parts, and skills required.

  • Page 132: Maintenance Schedule

    Maintenance work should be performed in new owner. accordance with Honda's standards and specifications by properly trained and equipped Honda recommends that your dealer should technicians. Your dealer meets all of these road test your vehicle after each periodic requirements. Keep an accurate record of maintenance is carried out.
  • Page 133 Inspect (clean, adjust, lubricate, or replace, if necessary) you have the necessary tools and are mechanically skilled. Replace Procedures are provided in an official Honda Shop Manual. Lubricate : Technical. In the interest of safety, have your vehicle serviced by your dealer.
  • Page 134 20200103191036_32MKR8000_eng_BOOK Page 134 Friday, January 03 2020 19:24:26 JST Maintenance Schedule Frequency Pre-ride Annual Regular Refer to Items Check × 1,000 km Check Replace page P. 134 × 1,000 mi Exhaust Gas Control Actuator Cable – Drive Chain Every 1,000 km (600 mi): Drive Chain Slider Brake Fluid 2 Years...
  • Page 135 Inspect (clean, adjust, lubricate, or replace, if necessary) you have the necessary tools and are mechanically skilled. Replace Procedures are provided in an official Honda Shop Manual. Lubricate : Technical. In the interest of safety, have your vehicle serviced by your dealer.
  • Page 136 20200103191036_32MKR8000_eng_BOOK Page 136 Friday, January 03 2020 19:24:26 JST Maintenance Schedule Frequency Pre-ride Annual Regular Refer to Items Check × 1,000 km Check Replace page P. 134 × 1,000 mi Exhaust Gas Control Actuator Cable – Drive Chain Every 1,000 km (600 mi): Drive Chain Slider Brake Fluid 2 Years...

  • Page 137: Maintenance Fundamentals

    20200103191036_32MKR8000_eng_BOOK Page 137 Friday, January 03 2020 19:24:26 JST Maintenance Fundamentals Drive chain - Check condition and slack, Pre-ride Inspection ● adjust and lubricate if necessary. P. 168 To ensure safety, it is your responsibility to Brakes - Check operation; ●...
  • Page 138 20200103191036_32MKR8000_eng_BOOK Page 138 Friday, January 03 2020 19:24:26 JST Maintenance Fundamentals Replacing Parts Colour label Always use Honda Genuine Parts or their equivalents to ensure reliability and safety. Except II GS type When ordering coloured components, specify the model name, colour, and code mentioned on the colour label.
  • Page 139 Your vehicle has a lithium-ion (li-ion) battery. P. 138 NOTICE CBR1000ST An improperly disposed of battery can be Your vehicle has a maintenance-free type harmful to the environment and human health. battery. You do not have to check the battery Always confirm local regulations for proper electrolyte level or add distilled water.
  • Page 140 20200103191036_32MKR8000_eng_BOOK Page 140 Friday, January 03 2020 19:24:26 JST Maintenance Fundamentals What to do in an emergency WARNING If any of the following occur, immediately see The battery gives off explosive your doctor. hydrogen gas during normal operation. Electrolyte splashes into your eyes: ●...
  • Page 141 Always replace the battery with another maintenance-free battery of the same type. NOTICE Installing non-Honda electrical accessories can overload the electrical system, discharging the battery and possibly damaging the system.
  • Page 142 20200103191036_32MKR8000_eng_BOOK Page 142 Friday, January 03 2020 19:24:26 JST Maintenance Fundamentals What to do in an emergency WARNING If any of the following occurs, immediately see The battery contains flammable organic your doctor. solvent as electrolyte. Electrolyte splashes into your eyes: ●...
  • Page 143 NOTICE If the terminals are heavily corroded, clean Installing non-Honda electrical accessories can and polish the terminals with a wire brush or overload the electrical system, discharging the sandpaper. Wear safety glasses.
  • Page 144 Selecting the Engine Oil Blown fuse For recommended engine oil, see “Specifications.” P. 241 If you use non-Honda engine oil, check the label to make sure that the oil satisfies all of the following standards: NOTICE JASO T 903 standard : MA ●...
  • Page 145 The API classification specifies the quality and Recommended brake fluid: performance rating of engine oils. Use SG or Honda DOT 4 Brake Fluid or equivalent higher oils, excluding oils marked as “Energy Conserving” or “Resource Conserving” on the Drive Chain circular API service symbol.
  • Page 146 20200103191036_32MKR8000_eng_BOOK Page 146 Friday, January 03 2020 19:24:26 JST Maintenance Fundamentals If the chain does not move smoothly, makes Cleaning and Lubricating strange noises, has damaged rollers, has loose After inspecting the slack, clean the chain and pins, has missing O-rings, or kinks, have the sprockets while rotating the rear wheel.
  • Page 147 Do not use a steam cleaner, a high pressure Except India, Nepal, Hong Kong, Macao cleaner, a wire brush, volatile solvent such as Pro Honda HP Coolant is a pre-mixed solution petrol and benzene, abrasive cleaner, chain of antifreeze and distilled water.
  • Page 148 20200103191036_32MKR8000_eng_BOOK Page 148 Friday, January 03 2020 19:24:26 JST Maintenance Fundamentals Inspecting for Damage Tyres (Inspecting/Replacing) Checking the Air Pressure Inspect the tyres for Visually inspect your tyres and use an air cuts, slits, or cracks that pressure gauge to measure the air pressure at exposes fabric or least once a month or any time you think the cords, or nails or other...
  • Page 149 20200103191036_32MKR8000_eng_BOOK Page 149 Friday, January 03 2020 19:24:26 JST Maintenance Fundamentals Inspecting Tread Depth WARNING Inspect the tread wear indicators. If they Riding on tyres that are excessively become visible, replace the tyres immediately. worn or improperly inflated can cause a For safe riding, you should replace the tyres crash in which you can be seriously hurt when the minimum tread depth is reached.
  • Page 150 ● of the same size, construction, speed rating, and load range. Always use the size and type of tyres Have the wheel balanced with Honda ● recommended in this owner's manual. Genuine balance weights or equivalent after the tyre is installed.
  • Page 151 20200103191036_32MKR8000_eng_BOOK Page 151 Friday, January 03 2020 19:24:26 JST Maintenance Fundamentals Air Cleaner II GS type This vehicle is equipped with a viscous type air cleaner element. Air blow cleaning or any other cleaning can degrade the viscous element performance and cause the intake of dust.

  • Page 152: Tool

    20200103191036_32MKR8000_eng_BOOK Page 152 Friday, January 03 2020 19:24:26 JST Tool The tool kit is stored under the rear seat. P. 154 You can perform some roadside repairs, minor adjustments and parts replacement with the provided tools. 3 mm Hex wrench ●...

  • Page 153: Removing & Installing Body Components

    20200103191036_32MKR8000_eng_BOOK Page 153 Friday, January 03 2020 19:24:26 JST Removing & Installing Body Components Battery CBR1000SP CBR1000ST Positive terminal Negative terminal Negative terminal Positive terminal Rubber strap Battery Rubber strap Battery...
  • Page 154 20200103191036_32MKR8000_eng_BOOK Page 154 Friday, January 03 2020 19:24:26 JST Removing & Installing Body Components Battery Removal Installation Make sure the electrical system is turned off. Install the parts in the reverse order of Remove the front seat. P. 153 removal. Always connect the positive + Unhook the rubber strap.

  • Page 155: Clip

    20200103191036_32MKR8000_eng_BOOK Page 155 Friday, January 03 2020 19:24:26 JST Removing & Installing Body Components Clip Clip Installation Removal Push the bottom of the centre pin. Insert the clip into the hole. Press down on the centre pin to release Press down on the centre pin to lock the the lock.

  • Page 156: Front Seat

    20200103191036_32MKR8000_eng_BOOK Page 156 Friday, January 03 2020 19:24:26 JST Removing & Installing Body Components Front Seat Front Seat Removal Remove the mounting bolts and washers, Mounting bolts Washer and then pull the front seat back and up. Installation Washer Install the front seat while inserting the tab into the recess.

  • Page 157: Rear Seat

    20200103191036_32MKR8000_eng_BOOK Page 157 Friday, January 03 2020 19:24:26 JST Removing & Installing Body Components Rear Seat Rear Seat Removal Insert the mechanical key into the seat Rear seat lock. Turn the mechanical key clockwise, then pull the rear seat forward and up. Installation Recess Insert the tab into the recess.

  • Page 158: Under Cowl

    20200103191036_32MKR8000_eng_BOOK Page 158 Friday, January 03 2020 19:24:26 JST Removing & Installing Body Components Under Cowl Under Cowl Under cowl bolt B Under cowl bolts A Under cowl bolts A Clip Under cowl bolt B Clip screw Under cowl Removal Under Remove the clips.
  • Page 159 20200103191036_32MKR8000_eng_BOOK Page 159 Friday, January 03 2020 19:24:26 JST Removing & Installing Body Components Under Cowl Installation Install the under cowl using reverse of the removal procedure. Route the tubes through the opening of the under cowl. Install and tighten the under cowl bolts A and B securely.

  • Page 160: Engine Oil

    20200103191036_32MKR8000_eng_BOOK Page 160 Friday, January 03 2020 19:24:26 JST Engine Oil Checking the Engine Oil Oil fill cap If the engine is cold, idle the engine for 3 to 5 minutes. Turn off the electrical system to stop the engine, and wait for 2 to 3 minutes. Upper level Place your vehicle in an upright position on a firm, level surface.
  • Page 161 20200103191036_32MKR8000_eng_BOOK Page 161 Friday, January 03 2020 19:24:26 JST Engine Oil Adding Engine Oil Adding Engine Oil Securely reinstall the oil fill cap. NOTICE If the engine oil is below or near the lower Overfilling with oil or operating with insufficient level mark, add the recommended engine oil.
  • Page 162 We recommend that you have your Drain bolt vehicle serviced by your dealer. Use a new Honda Genuine oil filter or equivalent specified for your model. NOTICE Using the wrong oil filter can result in serious damage to the engine.
  • Page 163 20200103191036_32MKR8000_eng_BOOK Page 163 Friday, January 03 2020 19:24:26 JST Engine Oil Changing Engine Oil & Filter Remove the oil filter with a filter wrench Install the new oil filter and tighten. and let the remaining oil drain out. Make Torque: 26 N·m (2.7 kgf·m, 19 lbf·ft) sure the prior seal is not stuck to the engine.

  • Page 164: Coolant

    20200103191036_32MKR8000_eng_BOOK Page 164 Friday, January 03 2020 19:24:26 JST Coolant Checking the Coolant UPPER level Check the coolant level in the reserve tank while the engine is cold. Place your vehicle on a firm, level surface. Hold your vehicle in an upright position. Check that the coolant level is between the UPPER level and LOWER level marks LOWER level...
  • Page 165 20200103191036_32MKR8000_eng_BOOK Page 165 Friday, January 03 2020 19:24:26 JST Coolant Adding Coolant Adding Coolant Stopper Inner Panel If the coolant level is below the LOWER level mark, add the recommended coolant P. 144) until the level reaches the UPPER level mark. Add fluid only from the reserve tank cap and Bolt do not remove the radiator cap.
  • Page 166 20200103191036_32MKR8000_eng_BOOK Page 166 Friday, January 03 2020 19:24:26 JST Coolant Changing Coolant Remove the reserve tank cap and add WARNING fluid while monitoring the coolant level. Removing the radiator cap while the Do not overfill above the UPPER level engine is hot can cause the coolant to mark.

  • Page 167: Brakes

    Have your vehicle level marks. inspected by your dealer. CBR1000SP Front Check that the brake fluid reservoir is Front Rear Rear brake UPPER level mark CBR1000ST CBR1000SP fluid UPPER level mark MAX mark reservoir Front brake fluid reservoir LOWER level mark...
  • Page 168 If necessary have the pads replaced by your dealer. Always replace both left and right brake pads at the same time. Front Rear Disc CBR1000ST CBR1000SP Pads Wear Wear indicator indicator Wear indicators...
  • Page 169 20200103191036_32MKR8000_eng_BOOK Page 169 Friday, January 03 2020 19:24:26 JST Brakes Adjusting the Brakelight Switch Adjusting the Brakelight Switch Check the operation of the brakelight switch. Hold the brakelight switch and turn the adjusting nut in the direction A if the switch operates too late, or turn the nut in the direction B if the switch operates too soon.

  • Page 170: Side Stand

    20200103191036_32MKR8000_eng_BOOK Page 170 Friday, January 03 2020 19:24:26 JST Side Stand Checking the Side Stand Start the engine, pull the clutch lever in, and shift the transmission into gear. Lower the side stand all the way. The engine should stop as you lower the side stand.

  • Page 171: Drive Chain

    20200103191036_32MKR8000_eng_BOOK Page 171 Friday, January 03 2020 19:24:26 JST Drive Chain Inspecting the Drive Chain Slack Check the drive chain slack at several points along the chain. If the slack is not constant at all points, some links may be kinked and binding.
  • Page 172 20200103191036_32MKR8000_eng_BOOK Page 172 Friday, January 03 2020 19:24:26 JST Drive Chain Adjusting the Drive Chain Slack Adjusting the Drive Chain Slack Lock nut Adjusting plate Adjusting the chain requires special tools. Adjusting bolt Have the drive chain slack adjusted by your dealer.
  • Page 173 20200103191036_32MKR8000_eng_BOOK Page 173 Friday, January 03 2020 19:24:26 JST Drive Chain Adjusting the Drive Chain Slack Turn both adjusting bolts an equal Tighten the rear axle nut. number of turns until the correct drive Torque: 135 N·m (13.8 kgf·m, 100 lbf·ft) chain slack is obtained.
  • Page 174 20200103191036_32MKR8000_eng_BOOK Page 174 Friday, January 03 2020 19:24:26 JST Drive Chain Checking the Drive Chain Slider Checking the Drive Chain Slider Checking the Drive Chain Wear Check the chain wear label when adjusting Check the condition of the drive chain slider. the drive chain.

  • Page 175: Clutch

    20200103191036_32MKR8000_eng_BOOK Page 175 Friday, January 03 2020 19:24:26 JST Clutch Checking the Clutch Check the clutch cable for kinks or signs of wear. If necessary have it replaced by your Checking the Clutch Lever Freeplay dealer. Lubricate the clutch cable with a Check the clutch lever freeplay.
  • Page 176 20200103191036_32MKR8000_eng_BOOK Page 176 Friday, January 03 2020 19:24:26 JST Clutch Adjusting the Clutch Lever Freeplay Adjusting the Clutch Lever Upper clutch cable adjuster Freeplay Upper Adjustment – Attempt adjustment with the upper clutch cable adjuster first. Turn the clutch cable adjuster until the freeplay is 10 - 20 mm (0.4 - 0.8 in).
  • Page 177 20200103191036_32MKR8000_eng_BOOK Page 177 Friday, January 03 2020 19:24:26 JST Clutch Adjusting the Clutch Lever Freeplay Lower Adjustment Lower lock nut Adjusting nut If the upper clutch cable adjuster is threaded out near its limit, or the correct freeplay cannot be obtained, attempt adjustment with the lower clutch cable adjusting nut.

  • Page 178: Throttle

    20200103191036_32MKR8000_eng_BOOK Page 178 Friday, January 03 2020 19:24:26 JST Throttle Checking the Throttle With the engine off, check that the throttle rotates smoothly from fully closed to fully open. If the throttle does not move smoothly, close automatically, have the vehicle inspected by your dealer.

  • Page 179: Other Adjustments

    20200103191036_32MKR8000_eng_BOOK Page 179 Friday, January 03 2020 19:24:26 JST Other Adjustments Adjusting the Headlight Aim You can adjust vertical aim of the headlight for proper alignment. Turn the knob in or out as necessary. Obey local laws and regulations. Left side Right side Lower Raise...

  • Page 180: Adjusting The Brake Lever

    Adjustment method Make sure the cut-out is seated on the lug. CBR1000ST CBR1000SP Adjuster Turn the adjuster until the numbers align with the index mark while pushing the lever forward in the desired position.
  • Page 181 20200103191036_32MKR8000_eng_BOOK Page 181 Friday, January 03 2020 19:24:26 JST Other Adjustments Adjusting the Brake Lever After adjustment, check that the lever operates correctly before riding. NOTICE Do not turn the adjuster beyond its natural limit.

  • Page 182: Adjusting The Front Suspension

    20200103191036_32MKR8000_eng_BOOK Page 182 Friday, January 03 2020 19:24:26 JST Other Adjustments Adjusting the Front Suspension Adjusting the Front Suspension Spring Preload CBR1000ST You can adjust the spring preload by the adjuster to suit the load or the road surface. The spring preload adjuster has 15 turns. Adjuster...
  • Page 183 20200103191036_32MKR8000_eng_BOOK Page 183 Friday, January 03 2020 19:24:26 JST Other Adjustments Adjusting the Front Suspension Rebound Damping CBR1000ST You can adjust the rebound damping by the TEN adjuster to suit the load or the road surface. Turn the adjuster using a suitable tool.
  • Page 184 20200103191036_32MKR8000_eng_BOOK Page 184 Friday, January 03 2020 19:24:26 JST Other Adjustments Adjusting the Front Suspension Compression Damping CBR1000ST You can adjust the compression damping by the COM adjuster to suit the load or the road surface. Turn the adjuster using a suitable tool.

  • Page 185: Adjusting The Rear Suspension

    Adjusting the Rear Suspension Adjusting the Rear Suspension 3 4 5 6 7 8 Spring Preload CBR1000ST You can adjust the spring preload by the adjuster to suit the load or the road surface. Turn the adjuster using a suitable tool.
  • Page 186 20200103191036_32MKR8000_eng_BOOK Page 186 Friday, January 03 2020 19:24:26 JST Other Adjustments Adjusting the Rear Suspension Rebound Damping CBR1000ST You can adjust the rebound damping by the TEN adjuster to suit the load or the road surface. Turn the adjuster using a suitable tool.
  • Page 187 20200103191036_32MKR8000_eng_BOOK Page 187 Friday, January 03 2020 19:24:26 JST Other Adjustments Adjusting the Rear Suspension Compression Damping CBR1000ST You can adjust the compression damping by the COM adjuster to suit the load or the road surface. Turn the adjuster using a suitable tool.

  • Page 188: Adjusting The Öhlins Smart Ec System

    20200103191036_32MKR8000_eng_BOOK Page 188 Friday, January 03 2020 19:24:26 JST Other Adjustments Adjusting the ÖHLINS Smart EC System Adjusting the ÖHLINS Smart EC SCU constantly determines riding conditions from vehicle information. As a result, this System system provides the optimum rebound and compression damping characteristics.
  • Page 189 20200103191036_32MKR8000_eng_BOOK Page 189 Friday, January 03 2020 19:24:26 JST Other Adjustments Adjusting the ÖHLINS Smart EC System Front Spring Preload Make sure the electrical system is turned off. You can adjust the spring preload by the Slide the connector cover, and then adjuster to suit the load or the road surface.
  • Page 190 20200103191036_32MKR8000_eng_BOOK Page 190 Friday, January 03 2020 19:24:26 JST Other Adjustments Adjusting the ÖHLINS Smart EC System Turn clockwise to increase spring preload Connect the front suspension connector (hard), or turn counterclockwise to to the coupler clip and then install the decrease spring preload (soft).
  • Page 191 20200103191036_32MKR8000_eng_BOOK Page 191 Friday, January 03 2020 19:24:26 JST Other Adjustments Adjusting the ÖHLINS Smart EC System Rear Spring Preload You can adjust the spring preload by the Adjuster adjuster knob to suit the load or the road surface. Turn clockwise to increase spring preload (hard), or turn counterclockwise to decrease spring preload (soft).
  • Page 192 20200103191036_32MKR8000_eng_BOOK Page 192 Friday, January 03 2020 19:24:26 JST Other Adjustments Adjusting the ÖHLINS Smart EC System Damping Adjustment Defaults of A-mode can be adjusted using the ÖHLINS Objective Based Tuning interface You can select A-mode which automatically (OBTi). adjusts damping according to the riding “OBTi”...
  • Page 193 20200103191036_32MKR8000_eng_BOOK Page 193 Friday, January 03 2020 19:24:26 JST Other Adjustments Adjusting the ÖHLINS Smart EC System FRONT/REAR: BRAKE: By adjusting the front and rear firmness By adjusting the brake support objective it is objective, it is possible to increase(+) or possible to increase (+) or decrease (-) the decrease(-) the front and rear suspension pitching resistance during initial braking.
  • Page 194 20200103191036_32MKR8000_eng_BOOK Page 194 Friday, January 03 2020 19:24:26 JST Other Adjustments Adjusting the ÖHLINS Smart EC System ACC (TRACK only): CORNER (TRACK only): By adjusting the acceleration objective it is By adjusting the corner objective it is possible possible to increase (+) or decrease (-) the to increase (+) or decrease (-) the agile pitching resistance during accelerating.
  • Page 195 20200103191036_32MKR8000_eng_BOOK Page 195 Friday, January 03 2020 19:24:26 JST Other Adjustments Adjusting the ÖHLINS Smart EC System MANUAL mode In MANUAL mode, the following damping The suspension setting can be fixed at a levels can be adjusted as desired: certain value on compression and rebound FR COM: Compression damping for front damping of the front and rear suspensions.

  • Page 196: Other Replacement

    20200103191036_32MKR8000_eng_BOOK Page 196 Friday, January 03 2020 19:24:26 JST Other Replacement Replacing the Honda SMART With the emblem upward, separate the Honda SMART Key by inserting a coin or Key Battery a flat head screwdriver covered with a protective cloth into the slit.
  • Page 197 20200103191036_32MKR8000_eng_BOOK Page 197 Friday, January 03 2020 19:24:26 JST Other Replacement Replacing the Honda SMART Key Battery Replace the old battery with a new one WARNING with the positive + side facing up. Chemical Burn Hazard: do not Assemble the parts in the reverse order of swallow battery.

  • Page 198: Troubleshooting

    ABS (Anti-lock Brake System) Indicator ..P. 199 HESD (Honda Electronic Steering Damper) Indicator ............P. 199 Torque Control Indicator......... P. 200 Honda SMART Key Indicator......P. 201 When the Honda SMART Key System Does Not Operate Properly........... P. 202...

  • Page 199: Engine Will Not Start

    20200103191036_32MKR8000_eng_BOOK Page 199 Friday, January 03 2020 19:24:26 JST Engine Will Not Start Starter Motor Operates But Starter Motor Does Not Engine Does Not Start Operate Check the following items: Check the following items: Check the correct engine starting Check the correct engine starting ●...

  • Page 200: Overheating (High Coolant Temperature Indicator Is On)

    20200103191036_32MKR8000_eng_BOOK Page 200 Friday, January 03 2020 19:24:26 JST Overheating (High coolant temperature indicator is on) The engine is overheating when the following Check that the radiator fan is operating, occurs: and then turn the electrical system off. High coolant temperature indicator If the fan is not operating: ●...

  • Page 201: Warning Indicators On Or Flashing

    20200103191036_32MKR8000_eng_BOOK Page 201 Friday, January 03 2020 19:24:26 JST Warning Indicators On or Flashing Low Oil Pressure Indicator If the engine oil level goes down rapidly, your vehicle may have a leak or another serious If the low oil pressure indicator comes on, problem.

  • Page 202: Abs (Anti-Lock Brake System) Indicator

    30 km/h (19 mph). Indicator comes on or starts flashing while ● riding. Indicator does not come on when the HESD (Honda Electronic ● electrical system is turned on. Steering Damper) Indicator Indicator does not go off at speeds above ●...

  • Page 203: Torque Control Indicator

    20200103191036_32MKR8000_eng_BOOK Page 203 Friday, January 03 2020 19:24:26 JST Warning Indicators On or Flashing Torque Control Indicator Torque Control Indicator Even when the Torque Control indicator is on, your vehicle will have normal riding ability If the indicator operates in one of the without Torque Control function.

  • Page 204: Honda Smart Key Indicator

    When the Honda SMART Key You may not be able to turn off the electrical indicator flashes 5 times system when losing the Honda SMART Key Replacing the Honda SMART Key while riding, or if the battery is low, or Battery P.

  • Page 205: When The Honda Smart Key System Does Not Operate Properly

    20200103191036_32MKR8000_eng_BOOK Page 205 Friday, January 03 2020 19:24:26 JST When the Honda SMART Key System Does Not Operate Properly When the Honda SMART Key system does Check that there is no communication ● not work properly, perform the following. failure in the Honda SMART Key system.
  • Page 206 20200103191036_32MKR8000_eng_BOOK Page 206 Friday, January 03 2020 19:24:26 JST When the Honda SMART Key System Does Not Operate Properly Check that a registered Honda SMART Check the battery condition and battery ● ● Key is used. lead in your vehicle.

  • Page 207: Activating The Electrical System In An Emergency

    The mechanical key can be used to activate Check the ID number on the ID tag. the electrical system when the electric system cannot be turned on because the Honda SMART Key battery becomes weak or dead. Set up to ID number input mode Remove the front seat using a 5 mm Hex wrench provided in the tool kit.
  • Page 208 20200103191036_32MKR8000_eng_BOOK Page 208 Friday, January 03 2020 19:24:26 JST Activating the Electrical System in an Emergency ID number input While inputting the ID number, if the button is not pressed for about 60 seconds, the You can input your ID number by pushing inputted ID number is cancelled and the the ignition (On) switch and Turn the system returns to the state before removing...
  • Page 209 20200103191036_32MKR8000_eng_BOOK Page 209 Friday, January 03 2020 19:24:26 JST Activating the Electrical System in an Emergency Example: To input “0”, turn the ignition switch knob To input “1”, push the ignition (On) ● ● (Off/Lock) counterclockwise without switch once, and then turn the ignition pushing the ignition (On) switch, and switch knob (Off/Lock)
  • Page 210 20200103191036_32MKR8000_eng_BOOK Page 210 Friday, January 03 2020 19:24:26 JST Activating the Electrical System in an Emergency You can turn off the engine and electrical ID number input success After the last digit of the ID number is system and also lock the steering using the inputted, ID number is authenticated, the ignition switch.
  • Page 211 20200103191036_32MKR8000_eng_BOOK Page 211 Friday, January 03 2020 19:24:26 JST Activating the Electrical System in an Emergency ID number input failure ID number input cancel If the ID number is not authenticated after If you input the wrong number, you can inputting, the steering lock indicator goes off.

  • Page 212: Tyre Puncture

    20200103191036_32MKR8000_eng_BOOK Page 212 Friday, January 03 2020 19:24:26 JST Tyre Puncture Repairing a puncture or removing a wheel WARNING requires special tools and technical expertise. Riding your vehicle with a temporary We recommend you have this type of service tyre repair can be risky. If the temporary performed by your dealer.
  • Page 213 20200103191036_32MKR8000_eng_BOOK Page 213 Friday, January 03 2020 19:24:26 JST Tyre Puncture Removing Wheels When removing and installing the wheel, be CBR1000ST careful not to damage the wheel speed Harness guide Mounting sensor and pulser ring. bolts Wheel speed sensor Front Wheel Removal Place your vehicle on a firm, level surface.
  • Page 214 20200103191036_32MKR8000_eng_BOOK Page 214 Friday, January 03 2020 19:24:26 JST Tyre Puncture Removing Wheels On the right side, remove the mounting CBR1000ST bolts and remove the brake caliper. Left side collar On the left side, remove the mounting bolts and remove the brake caliper.
  • Page 215 Loosen the right axle pinch bolts. CBR1000SP On the right side, withdraw the front axle Front axle shaft Right side collar shaft, and remove the side collars and wheel. CBR1000ST Front axle shaft Right side collar Axle pinch bolts Axle pinch bolts...
  • Page 216 Align the end of the front axle shaft with the surface of the fork leg. CBR1000ST End of front axle shaft Surface of fork leg Tighten the right axle pinch bolts to hold the axle.
  • Page 217 20200103191036_32MKR8000_eng_BOOK Page 217 Friday, January 03 2020 19:24:26 JST Tyre Puncture Removing Wheels Install the left brake caliper and tighten Retighten the right axle pinch bolts. the mounting bolts. Torque: 22 N·m (2.2 kgf·m, 16 lbf·ft). Torque: 40 N·m (4.1 kgf·m, 30 lbf·ft). Raise the front wheel off the ground Install the right brake caliper and tighten again, and check that the wheel rotates...
  • Page 218 20200103191036_32MKR8000_eng_BOOK Page 218 Friday, January 03 2020 19:24:26 JST Tyre Puncture Removing Wheels Rear Wheel Remove the drive chain from the driven sprocket by pushing the rear wheel Removal forward. Place your vehicle on a firm, level surface. Remove the rear axle shaft and adjusting Support your vehicle securely and raise plates.
  • Page 219 20200103191036_32MKR8000_eng_BOOK Page 219 Friday, January 03 2020 19:24:26 JST Tyre Puncture Removing Wheels Remove the brake caliper bracket, rear Installation wheel and side collars. To install the rear wheel, reverse the Support the brake caliper assembly so removal procedure. that it doesn’t hang from the brake Take care to prevent the brake caliper hose.
  • Page 220 20200103191036_32MKR8000_eng_BOOK Page 220 Friday, January 03 2020 19:24:26 JST Tyre Puncture Removing Wheels Make sure that the lug on the brake Adjust the drive chain. P. 169 caliper bracket is positioned in the slot on Install and tighten the rear axle nut. the swingarm.

  • Page 221: Electrical Trouble

    Electrical Trouble Battery Goes Dead CBR1000SP Battery charging is needed. A battery charger recommended by your CBR1000ST Charge the battery using a motorcycle lithium-ion (li-ion) battery manufacturer is battery charger. needed for battery charging. Remove the battery from the vehicle before Contact your dealer before charging the charging.

  • Page 222: Burned-Out Light Bulb

    20200103191036_32MKR8000_eng_BOOK Page 222 Friday, January 03 2020 19:24:26 JST Electrical Trouble Burned-out Light Bulb Burned-out Light Bulb License plate light Brakelight/ Taillight All light bulbs on the vehicle are LEDs. If there is an LED which is not turned on, see your dealer for servicing.

  • Page 223: Blown Fuse

    20200103191036_32MKR8000_eng_BOOK Page 223 Friday, January 03 2020 19:24:26 JST Electrical Trouble Blown Fuse Blown Fuse Fuse puller Before handling fuses, see “Inspecting and Replacing Fuses.” P. 141 Spare fuses Fuse Box Fuses Fuse box cover Remove the front seat. P. 153 Remove the fuse box cover.

  • Page 224: Information

    20200103191036_32MKR8000_eng_BOOK Page 224 Friday, January 03 2020 19:24:26 JST Information Service Diagnostic Recorders....... P. 222 Keys..............P. 223 Instruments, Controls, & Other Features... P. 227 Caring for Your Vehicle........P. 229 Storing Your Vehicle........P. 234 Transporting Your Vehicle ......P. 235 You &...

  • Page 225: Service Diagnostic Recorders

    However this data may be accessed by Honda, its authorised dealers and authorised repairers, employees, representatives and contractors only for the purpose of the technical diagnosis,...

  • Page 226: Keys

    Do not store near any magnetized products ● such as a magnetized key chain. The ID number of the Honda SMART Key is on Always keep the Honda SMART Key away ● the ID tag. You can also unlock the steering (if it...
  • Page 227 20200103191036_32MKR8000_eng_BOOK Page 227 Friday, January 03 2020 19:24:26 JST Keys If fuel, wax, or grease adhere to the Honda To get an additional Honda SMART Key, take ● SMART Key, wipe it off immediately to avoid the Honda SMART Key and the vehicle to your cracking or warping.
  • Page 228 YANYOL SOKAK. NO:1 41420, CAYIROVA / KOCAELI / TURKEY The declaration of conformity to RE Directive is Hereby, Honda Lock Mfg. Co., Ltd. declares that provided to the owner at the time of purchase. the radio equipment type HLSS-5 is in The declaration of conformity should be kept at compliance with Directive 2014/53/EU.
  • Page 229 20200103191036_32MKR8000_eng_BOOK Page 229 Friday, January 03 2020 19:24:26 JST Keys Bahrain only Vietnam only Manufacturer Honda Lock Mfg. Co., Ltd. Model name HLSS-5...

  • Page 230: Instruments, Controls, & Other Features

    20200103191036_32MKR8000_eng_BOOK Page 230 Friday, January 03 2020 19:24:26 JST Instruments, Controls, & Other Features Instruments, Controls, & Odometer Other Features The display locks at 999,999 when the read-out exceeds 999,999. Ignition Switch Leaving the electrical system on with the engine Tripmeter stopped will drain the battery.
  • Page 231 HESD Throttle by Wire System The Honda Electronic Steering Damper (HESD) automatically controls the steering damper This model is equipped with a Throttle by Wire characteristics in accordance with vehicle speed System.

  • Page 232: Caring For Your Vehicle

    The backlight brightness of the meter will be Frequent cleaning and polishing is important to controlled automatically when “AUTO” is ensure the life of your Honda. A clean vehicle selected on the brightness setting. makes it easier to spot potential problems.
  • Page 233 20200103191036_32MKR8000_eng_BOOK Page 233 Friday, January 03 2020 19:24:26 JST Caring for Your Vehicle Thoroughly rinse your vehicle with plenty of Washing Precautions clean water and dry with a soft, clean cloth. Follow these guidelines when washing: After the vehicle dries, lubricate any moving Do not use high-pressure washers: ●...
  • Page 234 20200103191036_32MKR8000_eng_BOOK Page 234 Friday, January 03 2020 19:24:26 JST Caring for Your Vehicle Do not direct water at the air cleaner: Do not use wax or polishing compounds on ● ● Water in the air cleaner can prevent the mat painted surface: engine from starting.
  • Page 235 20200103191036_32MKR8000_eng_BOOK Page 235 Friday, January 03 2020 19:24:26 JST Caring for Your Vehicle Aluminium Components Windscreen Aluminium will corrode from contact with dirt, Using plenty of water, clean the windscreen with mud, or road salt. Clean aluminium parts a soft cloth or sponge. (Avoid using detergents regularly and follow these guidelines to avoid or any kind of chemical cleaner on the scratches:...
  • Page 236 20200103191036_32MKR8000_eng_BOOK Page 236 Friday, January 03 2020 19:24:26 JST Caring for Your Vehicle Exhaust Pipe and Muffler Coated area To remove mud or dust, use a wet sponge and The exhaust pipe and muffler are titanium and a mild detergent, then rinse well with clean stainless steel but may become stained by mud water.

  • Page 237: Storing Your Vehicle

    20200103191036_32MKR8000_eng_BOOK Page 237 Friday, January 03 2020 19:24:26 JST Storing Your Vehicle Storing Your Vehicle Remove the battery ( P. 150) to prevent ● discharge. Fully charge the battery and then If you store your vehicle outdoors, you should place it in a shaded, well-ventilated area. consider using a full-body cover.

  • Page 238: Transporting Your Vehicle

    20200103191036_32MKR8000_eng_BOOK Page 238 Friday, January 03 2020 19:24:26 JST Transporting Your Vehicle Transporting Your Vehicle You & the Environment If your vehicle needs to be transported, it Owning and riding a vehicle can be enjoyable, should be carried on a motorcycle trailer or a but you must do your part to protect the flatbed truck or trailer that has a loading ramp environment.
  • Page 239 20200103191036_32MKR8000_eng_BOOK Page 239 Friday, January 03 2020 19:24:26 JST You & the Environment Recycle Wastes Put oil and other toxic wastes in approved containers and take them to a recycling centre. Call your local or state office of public works or environmental services to find a recycling centre in your area, and to get instructions on how to dispose of non-recyclable wastes.

  • Page 240: Serial Numbers

    20200103191036_32MKR8000_eng_BOOK Page 240 Friday, January 03 2020 19:24:26 JST Serial Numbers Serial Numbers The frame and engine serial numbers uniquely identify your vehicle and are required in order to register your vehicle. They may also be required when ordering replacement parts. You should record these numbers and keep them in a safe place.

  • Page 241: Fuels Containing Alcohol

    20200103191036_32MKR8000_eng_BOOK Page 241 Friday, January 03 2020 19:24:26 JST Fuels Containing Alcohol Fuels Containing Alcohol The use of petrol containing more than 10% ethanol may: Some conventional fuels blended with alcohol Damage the painting of the fuel tank. ● are available in some locales to help reduce Damage the rubber tubes of the fuel line.

  • Page 242: Catalytic Converter

    A defective catalytic converter contributes to air pollution and can impair your engine's performance. A replacement unit must be an original Honda part or equivalent.

  • Page 243: Specifications

    Overall length 2,100 mm (82.7 in) Tank capacity 16.1 L (4.25 US gal, 3.54 Imp gal) Overall width 745 mm (29.3 in) CBR1000ST Overall height 1,140 mm (44.9 in) YTZ7S Wheelbase 1,455 mm (57.3 in) 12 V-6 Ah (10 HR) / 12 V-6.3 Ah (20 HR)
  • Page 244 If not available, use SAE 80 or 90 gear oil. Idle speed 1,400 ± 100 rpm Drive chain slack 25 - 35 mm (1.0 - 1.4 in) Honda 4-stroke motorcycle oil API Service DID525HV3KAI or RK525ROZ8 Standard drive Classification SG or higher, excluding oils...
  • Page 245 20200103191036_32MKR8000_eng_BOOK Page 245 Friday, January 03 2020 19:24:26 JST Specifications Bulbs Torque Specifications ■ ■ Headlight Under cowl bolt 1.0 N·m (0.1 kgf·m, 0.7 lbf·ft) Brakelight/Taillight Under cowl pan screw 10 N·m (1.0 kgf·m, 7 lbf·ft) Front turn signal / Position light Oil filter 26 N·m (2.7 kgf·m, 19 lbf·ft) Rear turn signal...

  • Page 246: Index

    20200103191036_32MKR8000_eng_BOOK Page 246 Friday, January 03 2020 19:24:26 JST Index ABS (Anti-lock Brake System)....... 16 Catalytic Converter........239 ABS (Anti-lock Brake System) Clutch System..........172 Indicator ..........94, 199 Coolant ............ 144, 161 ABS Mode Indicator........55 Coolant Temperature Gauge ......51 Accessories ............
  • Page 247 High beam indicator....27, 28, 29, 30, 31 High Coolant Temperature Indicator ..........55, 197 Flooded Engine ..........116 Honda Smart Key Indicator ....95, 201 Frame Number ..........237 Horn Button ............98 Front Seat ............153 Front Suspension........... 179...
  • Page 248 Damper)............ 55, 199 FUEL ..............12 High Coolant Temperature ....55, 197 Radiator Cap ............10 Honda SMART Key ........95, 201 Rear Cushion............11 Left Turn Signal ..........93 Safety Reminder ..........12 Low Oil Pressure ........55, 198 Tyre Information &...
  • Page 249 20200103191036_32MKR8000_eng_BOOK Page 249 Friday, January 03 2020 19:24:26 JST Overheating ............ 197 Maintenance Owner's Manual ........126, 227 Fundamentals ........... 134 Importance............128 Safety ..............128 P Value ............. 111 Schedule ............129 Parking ............... 17 Maximum Weight Limit ......... 21 Parts Location...........
  • Page 250 20200103191036_32MKR8000_eng_BOOK Page 250 Friday, January 03 2020 19:24:26 JST Service Diagnostic Recorders ..... 222 Rear Seat............154 Setting Mode ............ 62 Rear Suspension ..........182 Shift Indicators ..........93 Recommended Shifting Gears ..........117 Coolant............... 144 Side Stand ............167 Fuel..............
  • Page 251 20200103191036_32MKR8000_eng_BOOK Page 251 Friday, January 03 2020 19:24:26 JST Suspension Torque Control Indicator ....... 93 Front..............179 Torque Control OFF Indicator....... 93 ÖHLINS Smart EC System ......185 Transporting ........... 235 Rear..............182 Tripmeter............227 S Mode............... 111 Troubleshooting ..........195 Switch Turn Signal Switch...........

This manual is also suitable for:

Cbr1000spCbr1000st ed

Table of Contents