Honda CBR125R Owner's Manual page 255

DISASSEMBLY
Remove the plate.
Remove the rollers, spring guides and springs from
the starter clutch outer.
INSPECTION
Check the rollers, spring guides, springs and starter
clutch outer for wear or damage.
Replace the rollers for wear or damage.
Replace the rollers
as a set.
Starter clutch should replaced as an assembly if the
starter clutch and springs are damaged or worn.
Check the starter driven gear teeth for wear or dam-
age.
Check the roller contact surface for wear or damage.
Measure the starter driven gear boss I.D.
SERVICE LIMIT: 22.08 mm (0.869 in)
Measure the starter driven gear boss O.D.
SERVICE LIMIT: 45.60 mm (1.795 in)
ALTERNATOR/STARTER CLUTCH
PLATE
ROLLER SPRING
GUIDE SPRING
ROLLER CLUTCH OUTER
GUIDE
CLUTCH OUTER
11-9