Brake Fluid Replacement - Honda CBR125R Owner's Manual

BRAKE FLUID REPLACEMENT/AIR
BLEEDING
BRAKE FLUID DRAINING
Turn the handlebar until the reservoir is parallel to
FRONT BRAKE:
the ground.
Remove the reservoir cover screws, reservoir cover,
set plate and diaphragm.
Support the motorcycle in an upright position.
REAR BRAKE:
Remove the bolt and reservoir.
Remove the reservoir cover screws, reservoir cover,
set plate and diaphragm.
Connect a bleed hose to the caliper bleed valve.
Loosen the bleed valve and pump the brake lever/
pedal until no more fluid flows out of the bleed
valve.
HYDRAULIC BRAKE
FRONT:
SET PLATE
DIAPHRAGM
REAR:
REAR:
COVER
DIAPHRAGM
FRONT:
BLEED HOSE
SCREWS
COVER
BOLT
SCREWS
SET PLATE
BLEED VALVE
15-5