Honda CBR125R Owner's Manual page 249

SERVICE INFORMATION
GENERAL
• This section covers the removal and installation of the flywheel, alternator and starter clutch. These services can be
done with the engine installed in the frame.
• For alternator inspection (page 16-7).
• For CKP sensor inspection (page 17-6).
• For starter motor service (page 18-6).
SPECIFICATIONS
Starter driven gear
TORQUE VALUES
Flywheel nut
CKP sensor bolt
Stator mounting bolt
Starter clutch bolt
TOOLS
Flywheel holder
07725-0040001
TROUBLESHOOTING
Engine does not turn
• Faulty starter clutch
• Damaged reduction gear/shaft
• Faulty starter driven gear
ITEM
I.D.
O.D.
64 N·m (6.5 kgf·m, 47 lbf·ft)
10 N·m (1.0 kgf·m, 7 lbf·ft)
10 N·m (1.0 kgf·m, 7 lbf·ft)
16 N·m (1.6 kgf·m, 12 lbf·ft)
Flywheel puller, 30 mm
07KMC-HE00100
ALTERNATOR/STARTER CLUTCH
STANDARD
22.010 – 22.031 (0.8665 – 0.8674)
45.660 – 45.673 (1.7976 – 1.7981)
Apply engine oil to the threads and seating surface.
Apply locking agent to the threads.
Apply locking agent to the threads.
Unit: mm (in)
SERVICE LIMIT
22.08 (0.869)
45.60 (1.795)
11-3