Clutch System; Headlight Aim - Honda CBR125R Owner's Manual

MAINTENANCE

CLUTCH SYSTEM

Measure the clutch lever freeplay at the end of the
clutch lever.
FREEPLAY: 10 – 20 mm (3/8 – 13/16 in)
Minor adjustment is made with the upper adjuster
The adjuster may
at the clutch lever.
be damaged if it is
positioned too far
Loosen the lock nut and turn the adjuster.
out, leaving minimal
If the adjuster is threaded out near its limit and the
thread
correct freeplay cannot be obtained, turn the
engagement.
adjuster all the way in and back out one turn.
Tighten the lock nut while holding the adjuster.
Recheck the clutch lever freeplay.
Major adjustment is made with the lower adjusting
nut at the clutch lifter lever.
Loosen the lock nut and turn the adjusting nut to
adjust the freeplay.
Tighten the lock nut while holding the adjusting nut.
If proper freeplay cannot be obtained, or the clutch
slips during test ride, disassemble and inspect the
clutch (page 10-9).

HEADLIGHT AIM

Support the motorcycle in an upright position.
Adjust the headlight aim vertically by turning the
Adjust the headlight
vertical beam adjusting screw.
aim as specified by
A clockwise rotation moves the beam up and coun-
local laws and
terclockwise rotation moves the beam down.
regulations.
3-24
10 – 20 mm (3/8 – 13/16 in)
LOCK NUT
ADJUSTING NUT
VERTICAL BEAM ADJUSTING SCREWS
ADJUSTER
LOCK NUT