Honda CBR1000RA Manual
  1. Manuals
  2. Brands
  3. Honda Manuals
  4. Motorcycle
  5. CBR1000RA
  6. Manual
Honda CBR1000RA Manual

Honda CBR1000RA Manual

Hide thumbs Also See for CBR1000RA:
Table of Contents

Advertisement

Quick Links

20180713160204_32MKF6100_eng_BOOK Page 1 Friday, July 13 2018 16:21:28 JST
This manual should be considered a permanent part of the
motorcycle and should remain with the motorcycle when it is resold.
This publication includes the latest production information available
before printing. Honda Motor Co., Ltd. reserves the right to make
changes at any time without notice and without incurring any
obligation.
No part of this publication may be reproduced without written
permission.
The vehicle pictured in this owner's manual may not match your
actual vehicle.
© 2018 Honda Motor Co., Ltd.

Advertisement

Table of Contents
loading

Related Manuals for Honda CBR1000RA

Summary of Contents for Honda CBR1000RA

  • Page 1 This publication includes the latest production information available before printing. Honda Motor Co., Ltd. reserves the right to make changes at any time without notice and without incurring any obligation.
  • Page 2 Congratulations on your purchase of a new Country Codes Honda motorcycle. Your selection of a Code Country Honda makes you part of a worldwide family CBR1000RA of satisfied customers who appreciate European direct sales Honda's reputation for building quality into...
  • Page 3 20180713160204_32MKF6100_eng_BOOK Page 3 Friday, July 13 2018 16:21:28 JST A Few Words About Safety Your safety, and the safety of others, is very DANGER important. Operating this motorcycle safely is You WILL be KILLED or SERIOUSLY an important responsibility. HURT if you don’t follow instructions. To help you make informed decisions about safety, we have provided operating WARNING...

  • Page 4: Table Of Contents

    20180713160204_32MKF6100_eng_BOOK Page 4 Friday, July 13 2018 16:21:28 JST Contents Motorcycle Safety P. 2 Operation Guide P. 24 Maintenance P. 118 Troubleshooting P. 181 Information P. 202 Specifications P. 217 Index P. 221...

  • Page 5: Motorcycle Safety

    20180713160204_32MKF6100_eng_BOOK Page 5 Friday, July 13 2018 16:21:28 JST Motorcycle Safety This section contains important information for safe riding of your motorcycle. Please read this section carefully. Safety Guidelines ..........P. 3 Image Labels............P. 7 Safety Precautions..........P. 15 Riding Precautions ..........

  • Page 6: Safety Guidelines

    Follow these guidelines to enhance your safety: focused and free of alcohol and drugs. Perform all routine and regular inspections ● CBR1000RA specified in this manual. Check that you and your passenger are both Stop the engine and keep sparks and flame ●...
  • Page 7 20180713160204_32MKF6100_eng_BOOK Page 7 Friday, July 13 2018 16:21:28 JST Safety Guidelines Ride Defensively Ride within Your Limits Always pay attention to other vehicles around Never ride beyond your personal abilities or you, and do not assume that other drivers see faster than conditions warrant.
  • Page 8 Keep Your Honda in Safe Condition If you decide to continue riding, first turn the It's important to keep your motorcycle properly ignition switch to the (Off) position, and maintained and in safe riding condition.
  • Page 9 20180713160204_32MKF6100_eng_BOOK Page 9 Friday, July 13 2018 16:21:28 JST Safety Guidelines WARNING Lithium-Ion (Li-Ion) Battery CBR1000S1 Running the engine of your motorcycle If you smell an unusual odor coming from the while in an enclosed or even partially lithium-ion (li-ion) battery, park your motorcycle enclosed area can cause a rapid build- in a safe place outside and away from up of toxic carbon monoxide gas.

  • Page 10: Image Labels

    20180713160204_32MKF6100_eng_BOOK Page 10 Friday, July 13 2018 16:21:28 JST Image Labels Image Labels The following pages describe the label Read instructions contained in Owner's meanings. Some labels warn you of Manual carefully. potential hazards that could cause serious injury. Others provide important safety Read instructions contained in Shop Manual information.
  • Page 11 Image Labels BATTERY LABEL DANGER Except KO, II KO type CBR1000RA • Keep flame and spark away from the battery. Battery produce explosive gas that can cause explosion. • Wear the eye protection and rubber gloves when handling the battery, or you can get burned or lose your eyesight by the battery electrolyte.
  • Page 12 20180713160204_32MKF6100_eng_BOOK Page 12 Friday, July 13 2018 16:21:28 JST Image Labels BATTERY LABEL DANGER CBR1000S1 • Do not dismantle, modify or solder the main unit and battery terminals. Doing so may cause leakage, heat generation, explosion, fire or loss of vision due to leaked electrolyte. If electrolyte gets into one's eye, immediately wash the eye with plenty of water, and receive treatment from an eye specialist (ophthalmologist) as soon as possible.
  • Page 13 20180713160204_32MKF6100_eng_BOOK Page 13 Friday, July 13 2018 16:21:28 JST Image Labels RADIATOR CAP LABEL DANGER Except KO, II KO type NEVER OPEN WHEN HOT. Hot coolant will scald you. Relief pressure valve begins to open at 1.1 kgf/cm...
  • Page 14 ACCESSORIES AND LOADING WARNING LABEL WARNING ED, II ED type ACCESSORIES AND LOADING CBR1000RA • The safety stability and handling of this motorcycle may be affected by the addition of accessories and luggage. • Read carefully the instructions contained in user's manual and installation guide before installing any accessory.
  • Page 15 20180713160204_32MKF6100_eng_BOOK Page 15 Friday, July 13 2018 16:21:28 JST Image Labels REAR CUSHION LABEL Except KO, II KO type CBR1000RA GAS FILLED Do not open. Do not heat. TYRE INFORMATION & DRIVE CHAIN LABEL Except KO, II KO type Cold tyre pressure:...
  • Page 16 20180713160204_32MKF6100_eng_BOOK Page 16 Friday, July 13 2018 16:21:28 JST Image Labels CBR1000RA ED, II ED, U, II U type SAFETY REMINDER LABEL Except KO, II KO type CBR1000RA For your protection, always wear helmet, protective apparel. FUEL LABEL ED, II ED, U, II U type...
  • Page 17 20180713160204_32MKF6100_eng_BOOK Page 17 Friday, July 13 2018 16:21:28 JST Image Labels CBR1000S1 SAFETY REMINDER LABEL II ED, II U type Except II KO type CBR1000S1 Operator only. No passenger. For your protection, always wear helmet, protective apparel. FUEL LABEL II ED, II U type Unleaded petrol only ETHANOL up to 10 % by volume Research Octane Number (RON) 95 or higher...

  • Page 18: Safety Precautions

    20180713160204_32MKF6100_eng_BOOK Page 18 Friday, July 13 2018 16:21:28 JST Safety Precautions Safety Precautions Protective Apparel CBR1000RA Ride cautiously and keep your hands on the ● Make sure that you and any passenger are handlebars and feet on the footpegs. wearing an approved motorcycle helmet, eye CBR1000RA ●...
  • Page 19 (or a protective Not wearing a helmet increases the suit) chance of serious injury or death in a crash. CBR1000RA Make sure that you and any passenger always wear an approved helmet and protective apparel. CBR1000S1 Make sure that you always wear an approved helmet and protective apparel.

  • Page 20: Riding Precautions

    20180713160204_32MKF6100_eng_BOOK Page 20 Friday, July 13 2018 16:21:28 JST Riding Precautions Riding Precautions Exercise caution on low traction surfaces. ● The tyres slip more easily on such surfaces and braking distances are Running-in Period longer. During the first 500 km (300 miles) of running, Avoid continuous braking.
  • Page 21 20180713160204_32MKF6100_eng_BOOK Page 21 Friday, July 13 2018 16:21:28 JST Riding Precautions Anti-lock Brake System (ABS) Engine Braking This model is equipped with an Anti-lock Brake Engine braking helps slow your motorcycle System (ABS) designed to help prevent the down when you release the throttle. For further brakes from locking up during hard braking.
  • Page 22 20180713160204_32MKF6100_eng_BOOK Page 22 Friday, July 13 2018 16:21:28 JST Riding Precautions Slowly lean the motorcycle to the left until its Parking weight rests on the side stand. Park on a firm, level surface. ● Turn the handlebars fully to the left. If you must park on a slight incline or loose ●...
  • Page 23 Torque Control may not compensate for rough Honda selectable torque control road conditions or rapid throttle operation. When the Honda selectable torque control Always consider road and weather conditions, (Torque Control) detects rear wheel spin during as well as your skills and condition, when acceleration, the system will limit the amount of applying throttle.

  • Page 24: Accessories & Modifications

    We strongly advise that you do not add any seriously hurt or killed. accessories that were not specifically designed for your motorcycle by Honda or make Follow all instructions in this owner's modifications to your motorcycle from its manual regarding accessories and original design.

  • Page 25: Loading

    20180713160204_32MKF6100_eng_BOOK Page 25 Friday, July 13 2018 16:21:28 JST Loading Loading WARNING CBR1000S1 ● CBR1000RA Never carry a passenger. Your motorcycle Overloading or improper loading can was not designed to carry a passenger. cause a crash and you can be seriously Carrying extra weight affects your ●...
  • Page 26 20180713160204_32MKF6100_eng_BOOK Page 26 Friday, July 13 2018 16:21:28 JST...

  • Page 27: Operation Guide

    20180713160204_32MKF6100_eng_BOOK Page 27 Friday, July 13 2018 16:21:28 JST Parts Location Tool kit CBR1000RA (P.117) Document bag (P.117) Main fuse/FI fuse (P.201) Fuse box (P.200) Battery (P.141) Front brake fluid reservoir (P.153) Front brake lever (P.166) Throttle grip (P.164) Rear brake fluid reservoir (P.153)
  • Page 28 20180713160204_32MKF6100_eng_BOOK Page 28 Friday, July 13 2018 16:21:28 JST Clutch lever (P.161) Front suspension rebound damping/compression damping adjuster (P.168) (P.169) Fuel fill cap (P.115) Front seat (P.143) Rear seat (P.144) Rear suspension compression damping adjuster (P.172) Rear suspension rebound damping adjuster (P.171) Coolant reserve tank (P.151)
  • Page 29 20180713160204_32MKF6100_eng_BOOK Page 29 Friday, July 13 2018 16:21:28 JST Parts Location (Continued) Tool kit CBR1000S1 (P.117) Document bag (P.117) Main fuse/FI fuse (P.201) Fuse box (P.200) Battery (P.141) Front brake fluid reservoir (P.153) Front brake lever (P.166) Throttle grip (P.164) Rear brake fluid reservoir (P.153) Engine oil drain bolt...
  • Page 30 20180713160204_32MKF6100_eng_BOOK Page 30 Friday, July 13 2018 16:21:28 JST Clutch lever (P.161) Front suspension spring preload adjuster (P.174) Fuel fill cap (P.115) Front seat (P.143) Single seat cowl (P.145) Coolant reserve tank (P.151) Rear suspension spring preload adjuster (P.176) Drive chain (P.157) Shift lever (P.113)
  • Page 31 20180713160204_32MKF6100_eng_BOOK Page 31 Friday, July 13 2018 16:21:28 JST Instruments Street mode Clock (12-hour display) Speedometer To set the clock: (P.76) Tachometer red zone (excessive engine rpm range) Tachometer NOTICE Do not operate the engine in the tachometer red zone. Excessive engine speed can adversely affect engine life.
  • Page 32 20180713160204_32MKF6100_eng_BOOK Page 32 Friday, July 13 2018 16:21:28 JST Gear position indicator Shows 1st to 6th gear positions. “-”appears CBR1000RA when the transmission is not shifted properly. Quick Shifter indicator Displays the current status of the Quick Shifter. : Quick Shifter system is disabled.
  • Page 33 20180713160204_32MKF6100_eng_BOOK Page 33 Friday, July 13 2018 16:21:28 JST Instruments (Continued) Circuit mode To Change to the circuit mode : Press and hold the button with your motorcycle stopped. ● To return to the street mode display, press and hold the button.
  • Page 34 20180713160204_32MKF6100_eng_BOOK Page 34 Friday, July 13 2018 16:21:28 JST Multi-information display Multi-information display can display the coolant temperature gauge, riding modes, INFO 1, INFO 2 and INFO 3 displays. Coolant temperature gauge ( CBR1000RA (P.32) INFO 3 display (P.45) INFO 2 display (P.37)
  • Page 35 20180713160204_32MKF6100_eng_BOOK Page 35 Friday, July 13 2018 16:21:28 JST Instruments (Continued) Coolant temperature gauge ( Display range: 35°C to 132°C 34°C or less: “---” is displayed. ● Between 122°C and 131°C: ● High coolant temperature indicator lights. Coolant temperature digits flash. Above 132°C: ●...
  • Page 36 20180713160204_32MKF6100_eng_BOOK Page 36 Friday, July 13 2018 16:21:28 JST To Switch the multi-information display (up) button To select the display area, repeatedly press the button. MODE Can not select the INFO 3 display while pop-up information displayed. (P.95) If the button is not pressed within 10 MODE (down)
  • Page 37 20180713160204_32MKF6100_eng_BOOK Page 37 Friday, July 13 2018 16:21:28 JST Instruments (Continued) INFO 1 display You can select the following: • Odometer [TOTAL] TOTAL (P.35) • Tripmeter [TRIP A/B] Changing the INFO 1 display Select the INFO 1 display. (P.33) Press the (up) or (down) TRIP A...
  • Page 38 20180713160204_32MKF6100_eng_BOOK Page 38 Friday, July 13 2018 16:21:28 JST Odometer [TOTAL] Tripmeter A/B [TRIP A/B] Total distance ridden. Distance ridden since the tripmeter was reset. When “------” is displayed, go to your dealer When “----.-” is displayed, go to your dealer for service.
  • Page 39 20180713160204_32MKF6100_eng_BOOK Page 39 Friday, July 13 2018 16:21:28 JST Instruments (Continued) To reset the tripmeter B, press and hold the To Reset the Tripmeter and Tripmeter button with the tripmeter B displayed. A Fuel Consumption MODE To reset tripmeter A and tripmeter A fuel consumption together, press and hold the Tripmeter B button with the tripmeter A or...
  • Page 40 20180713160204_32MKF6100_eng_BOOK Page 40 Friday, July 13 2018 16:21:28 JST INFO 2 display You can select the following: • Numerical tachometer display [REV] • Current fuel mileage [INST. CONS.] • Average fuel mileage [AVE. CONS.] • Tripmeter A fuel consumption [TRIP A CONS.] •...
  • Page 41 20180713160204_32MKF6100_eng_BOOK Page 41 Friday, July 13 2018 16:21:28 JST Instruments (Continued) Numerical tachometer display (P.39) Current fuel mileage (P.39) Average fuel mileage (P.40) Tripmeter A fuel consumption (P.41) Average speed (P.41) Elapsed time (P.42) Available driving Press the distance (P.42) (up) button Amount of remaining Press the...
  • Page 42 20180713160204_32MKF6100_eng_BOOK Page 42 Friday, July 13 2018 16:21:28 JST Numerical tachometer Display [REV] Current fuel mileage [INST. CONS.] Displays engine revolutions per minutes. Displays the current instant fuel mileage. Display range: 0 to 15,400 r/min (rpm) Display range: 0.0 to 99.9 L/100km (km/L, Above 15,400 r/min (rpm): “15400”...
  • Page 43 20180713160204_32MKF6100_eng_BOOK Page 43 Friday, July 13 2018 16:21:28 JST Instruments (Continued) Average fuel mileage [AVG. CONS.] To Reset the Average Fuel Mileage Displays the average fuel mileage since the Press and hold the button with the MODE average fuel mileage was reset. average fuel mileage displayed.
  • Page 44 20180713160204_32MKF6100_eng_BOOK Page 44 Friday, July 13 2018 16:21:28 JST Tripmeter A fuel consumption [TRIP A Average Speed [AVG. SPD.] CONS.] Displays average speed since the engine was Displays the tripmeter A fuel consumption started. since the tripmeter A was reset. Display range: 0 to 299 km/h (0 to 186 mph) Display range: 0.0 to 300.0 L (litres) or 0.0 to Initial display: “---”...
  • Page 45 20180713160204_32MKF6100_eng_BOOK Page 45 Friday, July 13 2018 16:21:28 JST Instruments (Continued) Elapsed time [ELAPSED] Available driving distance [RANGE] Displays operating time since the engine was (Only reserve fuel mode) started. When the low fuel indicator lights and the Display range: 00:00 to 99:59 (hours:minutes) low fuel pop-up information appears, the Above 99:59: returns to 00:00.
  • Page 46 20180713160204_32MKF6100_eng_BOOK Page 46 Friday, July 13 2018 16:21:28 JST Amount of remaining fuel [REMAIN] (Only reserve fuel mode) When the low fuel indicator lights and the low fuel pop-up information appears, the estimated amount of remaining fuel can be selected. Display range: 4.0 to 1.0 L (litres) or 0.9 to 0.2 GAL (gallon) Below 1.0 L (0.2 GAL): “-.-”...
  • Page 47 20180713160204_32MKF6100_eng_BOOK Page 47 Friday, July 13 2018 16:21:28 JST Instruments (Continued) Reserve Fuel Mode Low fuel pop-up information When the low fuel indicator lights and the low fuel pop-up information appears, the available driving distance is indicated, and the amount of remaining fuel display can be selected.
  • Page 48 20180713160204_32MKF6100_eng_BOOK Page 48 Friday, July 13 2018 16:21:28 JST INFO 3 display Changing the INFO 3 display Select the INFO 3 display. You can select the following: (P.33) Press the (up) or (down) • CBR Logo button until the desired display is displayed. •...
  • Page 49 20180713160204_32MKF6100_eng_BOOK Page 49 Friday, July 13 2018 16:21:28 JST Instruments (Continued) CBR logo Throttle grip angle [GRIP ANGLE] Displays the CBR logo. Displays the throttle grip angle during operation. Shift indicator set value [REV IND NE] When “--” is displayed, go to your dealer for Displays the shift indicator set value.
  • Page 50 20180713160204_32MKF6100_eng_BOOK Page 50 Friday, July 13 2018 16:21:28 JST Date [DATE] User letter Displays the today's date. Displays the characters of user's choice. Display range: Day of the week: MON to SUN DAY: 1 to 31 Month: JAN to DEC To set the USER LETTER: (P.70) Year: 2010 to 2099...
  • Page 51 20180713160204_32MKF6100_eng_BOOK Page 51 Friday, July 13 2018 16:21:28 JST Instruments (Continued) Setting mode GENERAL ● (P.75) Setting the date and clock You can perform the following: Setting each meter unit FUNCTION ● (P.51) Resetting to factory default settings CBR1000S1 SERVICE ●...
  • Page 52 20180713160204_32MKF6100_eng_BOOK Page 52 Friday, July 13 2018 16:21:28 JST Select a menu by pressing the (up) To Shift to the Setting Mode (down) button and press the Press and hold the button and MODE button. (up) or (down) button until main MODE Press and hold the (up) or...
  • Page 53 20180713160204_32MKF6100_eng_BOOK Page 53 Friday, July 13 2018 16:21:28 JST Instruments (Continued) Press the button MODE Ordinary display Press and hold the button MODE (up) or (down) button FUNCTION (P.51) Press the (up) button Press the (down) button LAP TIME (P.61) To end the setting DISPLAY (P.64) Select the “EXIT”...
  • Page 54 20180713160204_32MKF6100_eng_BOOK Page 54 Friday, July 13 2018 16:21:28 JST FUNCTION "FUNCTION" is selected FUNCTION To Set the FUNCTION Menu Select the “FUNCTION” menu on the main QUICK SHIFTER (P.52) CBR1000S1 menu screen. (P.49) Select a menu by pressing the (up) SUSPENSION A1 (P.57) CBR1000S1...
  • Page 55 20180713160204_32MKF6100_eng_BOOK Page 55 Friday, July 13 2018 16:21:28 JST Instruments (Continued) To end the setting QUICK SHIFTER Select the (return) on the menu screen. CBR1000S1 The display returns to the “QUICKSHIFTER” You can change the setting of the Quick menu on the “FUNCTION” screen. Shifter.
  • Page 56 20180713160204_32MKF6100_eng_BOOK Page 56 Friday, July 13 2018 16:21:28 JST Select “ON” (activate) or “OFF” (deactivate) You can select “ON” (activate) or “OFF” using the (up) or (down) button. (deactivate) for upshifting with the Quick Shifter. Select the “UP” using the (up) or (down) button, and press the button.
  • Page 57 20180713160204_32MKF6100_eng_BOOK Page 57 Friday, July 13 2018 16:21:28 JST Instruments (Continued) DOWN Select “ON” (activate) or “OFF” (deactivate) You can select “ON” (activate) or “OFF” using the (up) or (down) button. (deactivate) for downshifting with the Quick Shifter. Select the “DOWN” using the (up) (down) button, and press the button.
  • Page 58 20180713160204_32MKF6100_eng_BOOK Page 58 Friday, July 13 2018 16:21:28 JST UP LVL Select one of the three levels using the You can select the shift pedal load level for (up) or (down) button. Press and hold the (up) or activating the Quick Shifter when upshifting. (down) button to move the menu Select the “UP LVL”...
  • Page 59 20180713160204_32MKF6100_eng_BOOK Page 59 Friday, July 13 2018 16:21:28 JST Instruments (Continued) DOWN LVL Select one of the three levels using the You can select the shift pedal load level for (up) or (down) button. Press and hold the (up) or activating the Quick Shifter when (down) button to move the menu downshifting.
  • Page 60 20180713160204_32MKF6100_eng_BOOK Page 60 Friday, July 13 2018 16:21:28 JST BRAKE, ACC (SUSPENSION A1 only), SUSPENSION A1, A2 and A3 CORNER (SUSPENSION A1 only) and CBR1000S1 GENERAL You can change the levels of OBTi support You can select the “DEFAULT” or one of the items.
  • Page 61 20180713160204_32MKF6100_eng_BOOK Page 61 Friday, July 13 2018 16:21:28 JST Instruments (Continued) Select the “DEFAULT” or one of the ten SUSPENSION M1, M2 and M3 suspension damping levels using the CBR1000S1 (up) or (down) button. You can adjust the compression and Press and hold the (up) or rebound damping of the front and rear...
  • Page 62 20180713160204_32MKF6100_eng_BOOK Page 62 Friday, July 13 2018 16:21:28 JST FR COMP, FR REB, RR COMP and RR REB Adjust to one of the 21 damping levels using You can select one of the 21 different (up) or (down) button. Press and hold the (up) or damping levels for the front and rear (down) button to move the menu...
  • Page 63 20180713160204_32MKF6100_eng_BOOK Page 63 Friday, July 13 2018 16:21:28 JST Instruments (Continued) Preset settings are as follows. HISS INDICATOR You can select the blinking or turning off the Front Rear HISS indicator. Compression Rebound Compression Rebound Select the “ON” (blinks) or “OFF” (off) using FR COM FR REB RR COM...
  • Page 64 20180713160204_32MKF6100_eng_BOOK Page 64 Friday, July 13 2018 16:21:28 JST LAP TIME "LAP TIME" is selected To Set the LAP TIME Menu LAP TIME Select the “LAP TIME” menu on the main menu screen. (P.49) Select the menu by pressing the LAP DATA (P.62) (up) or (down) button, and press...
  • Page 65 20180713160204_32MKF6100_eng_BOOK Page 65 Friday, July 13 2018 16:21:28 JST Instruments (Continued) angle and maximum right bank angle LAP DATA information, press the button. The history of recorded lap time and To end the display of lap time history, press information are displayed. button.
  • Page 66 20180713160204_32MKF6100_eng_BOOK Page 66 Friday, July 13 2018 16:21:28 JST CLEAR DATA Select “NO” (not clear) or “YES” (clear) using (up) or (down) button. Press the button. The display returns MODE to the upper level hierarchy. To use the Lap Timer (P.91) Continued...
  • Page 67 20180713160204_32MKF6100_eng_BOOK Page 67 Friday, July 13 2018 16:21:28 JST Instruments (Continued) DISPLAY "DISPLAY" is selected To Set the DISPLAY Menu DISPLAY Select the “DISPLAY” menu on the main menu screen. (P.49) DISPLAY MODE (P.65) Select the menu by pressing the (up) or (down) button and press the button.
  • Page 68 20180713160204_32MKF6100_eng_BOOK Page 68 Friday, July 13 2018 16:21:28 JST DISPLAY MODE When the “MECHANIC” is selected Press the button. The mechanic MODE Select “STREET”, “MECHANIC” or “CIRCUIT” mode ends, and then the display returns to using the (up) or (down) the upper level hierarchy.
  • Page 69 20180713160204_32MKF6100_eng_BOOK Page 69 Friday, July 13 2018 16:21:28 JST Instruments (Continued) Mechanic Mode Throttle grip position Displays the current information of the Tachometer Gear position motorcycle. Displays the following information: Tachometer ● Gear position ● Throttle grip position ● Coolant temperature ●...
  • Page 70 20180713160204_32MKF6100_eng_BOOK Page 70 Friday, July 13 2018 16:21:28 JST SHIFT INDICATOR You can change the setting of the shift indicators. Select the “OFF” (deactivate) or an engine revolution at which the shift indicators start blinking using the (up) or (down) button. Information of the Shift Indicator: Press and hold the (up) or...
  • Page 71 20180713160204_32MKF6100_eng_BOOK Page 71 Friday, July 13 2018 16:21:28 JST Instruments (Continued) BRIGHTNESS You can adjust the backlight brightness to one of the eight levels or select the auto adjustment. Automatic brightness control (P.207) Select the “AUTO” (auto adjustment) or brightness level using the (up) or (down) button.
  • Page 72 20180713160204_32MKF6100_eng_BOOK Page 72 Friday, July 13 2018 16:21:28 JST BACKGROUND You can change the setting of the background to one of the four categories or select the auto adjustment. Select the “AUTO”, “WHITE”, “BLACK”, “METALLIC” or “CARBON” using the (up) or (down) button.
  • Page 73 20180713160204_32MKF6100_eng_BOOK Page 73 Friday, July 13 2018 16:21:28 JST Instruments (Continued) USER LETTER You can select any 10 characters you like. Select the first character using the (up) or (down) button until a desired character appears Press and hold the (up) or (down) button to move the menu A list of characters that can be selected...
  • Page 74 20180713160204_32MKF6100_eng_BOOK Page 74 Friday, July 13 2018 16:21:28 JST To end the setting FAVORITE Select the (return) on the menu screen. You can change the indications on the INFO The display returns to the “FAVORITE” menu 1, INFO 2, and INFO 3 to the following on the “DISPLAY”...
  • Page 75 20180713160204_32MKF6100_eng_BOOK Page 75 Friday, July 13 2018 16:21:28 JST Instruments (Continued) INFO 1 Select the “TOTAL”, “TRIP A” or “TRIP B” You can select the “TOTAL”, “TRIP A” or “TRIP using the (up) or (down) button. B” for INFO 1. Press and hold the (up) or Select the “INFO 1”...
  • Page 76 20180713160204_32MKF6100_eng_BOOK Page 76 Friday, July 13 2018 16:21:28 JST INFO 2 Select the “REV”, “INST.CONS.”, You can select the “REV”, “INST.CONS.”, “AVG.CONS.”, “TRIP A CONS.”, “AVG.SPD.” or “ELAPSED” using the (up) or “AVG.CONS.”, “TRIP A CONS.”, “AVG.SPD.” or (down) button. “ELAPSED”...
  • Page 77 20180713160204_32MKF6100_eng_BOOK Page 77 Friday, July 13 2018 16:21:28 JST Instruments (Continued) INFO 3 Select the “CBR LOGO”, “REV IND NE”, “GRIP You can select the “CBR LOGO”, “REV IND ANGLE”, “VOLTAGE”, “DATE”, “USER LETTER” or blank display using the NE”, “GRIP ANGLE”, “VOLTAGE”, “DATE”, (up) or (down) button.
  • Page 78 20180713160204_32MKF6100_eng_BOOK Page 78 Friday, July 13 2018 16:21:28 JST GENERAL "GENERAL" is selected GENERAL To Set the GENERAL Menu Select the “GENERAL” on the main menu screen. (P.49) Select a menu by pressing the (up) DATE & TIME (P.76) (down) button and press the button.
  • Page 79 20180713160204_32MKF6100_eng_BOOK Page 79 Friday, July 13 2018 16:21:28 JST Instruments (Continued) Press the button. The cursor moves DATE & TIME MODE to the indication of month. Press the (up) or (down) Press the (up) or (down) button until the desired tens digit of the year button until the desired month is displayed.
  • Page 80 20180713160204_32MKF6100_eng_BOOK Page 80 Friday, July 13 2018 16:21:28 JST Press the button. The cursor moves MODE UNITS to the indication of minute. You can change the speed and mileage, and Press the (up) or (down) fuel mileage meter units. button until the desired minute is displayed. Press the button.
  • Page 81 20180713160204_32MKF6100_eng_BOOK Page 81 Friday, July 13 2018 16:21:28 JST Instruments (Continued) The units of the current fuel mileage, average To end the setting fuel mileage and amount of remaining fuel Select the (return) on the menu screen. are changed in “FUEL CONS.” menu. The display returns to the “UNITS”...
  • Page 82 20180713160204_32MKF6100_eng_BOOK Page 82 Friday, July 13 2018 16:21:28 JST Speed and Mileage Unit [SPEED] Units of the current fuel mileage and ● average fuel mileage show “L/100km” or Except KO, II KO type “km/L”. Select the “km/h” or “mph” using the (up) or (down) button.
  • Page 83 20180713160204_32MKF6100_eng_BOOK Page 83 Friday, July 13 2018 16:21:28 JST Instruments (Continued) Fuel Mileage Meter Unit [FUEL CONS.] When the “km/h” of the “SPEED” menu is selected Select the “L/100 km” or “km/L” using the (up) or (down) button. Except KO, II KO type When the “mph”...
  • Page 84 20180713160204_32MKF6100_eng_BOOK Page 84 Friday, July 13 2018 16:21:28 JST When selecting the “km/L” RESTORE DEFAULT Units of the current fuel mileage and The set value can be returned to default ● average fuel mileage show “km/L”. setting. Units of the tripmeter A fuel consumption ●...
  • Page 85 20180713160204_32MKF6100_eng_BOOK Page 85 Friday, July 13 2018 16:21:28 JST Instruments (Continued) Select the “NO” (not restore) or “YES” Select the “EXIT” by pressing the MODE (restore) using the the (up) or button. (down) button on the confirmation screen. When the “NO” is selected Press the button.
  • Page 86 20180713160204_32MKF6100_eng_BOOK Page 86 Friday, July 13 2018 16:21:28 JST Default setting values: CBR1000S1 ● LAP DATA: Cleared SUSPENSION M1, M2, M3: Preset setting ● DISPLAY MODE: STREET ● (P.60) SHIFT INDICATOR: OFF Riding mode: USER 1 and USER 2 setting ●...
  • Page 87 20180713160204_32MKF6100_eng_BOOK Page 87 Friday, July 13 2018 16:21:28 JST Instruments (Continued) SERVICE "SERVICE" is selected To Set the SERVICE Menu SERVICE Select the “SERVICE” menu on the main menu screen. (P.49) Select the menu by pressing the MAINTENANCE (P.85) (up) or (down) button and press the button.
  • Page 88 20180713160204_32MKF6100_eng_BOOK Page 88 Friday, July 13 2018 16:21:28 JST To end the setting MAINTENANCE Select the (return) on the menu screen, You can check the next inspection time and and then the display returns to the “SERVICE” change the setting of next inspection. menu on the main menu screen.
  • Page 89 20180713160204_32MKF6100_eng_BOOK Page 89 Friday, July 13 2018 16:21:28 JST Instruments (Continued) Display range: “-500 km” or “-300 mile” from the next ● DISTANCE: periodic inspection Next periodic inspection: “-100 km” or “-60 mile” from the next ● -12000 to +99900 km engine oil change (-8000 to +99950 mile) One month before the set month...
  • Page 90 20180713160204_32MKF6100_eng_BOOK Page 90 Friday, July 13 2018 16:21:28 JST Next inspection setting Select “ ” (periodic inspection ) or “ ” (engine oil change) using the (up) (down) button. Press the (up) or (down) button until the desired distance value is displayed.
  • Page 91 20180713160204_32MKF6100_eng_BOOK Page 91 Friday, July 13 2018 16:21:28 JST Instruments (Continued) Press the button. The cursor moves MODE SUSPENSION to the indication of month. CBR1000S1 Press the (up) or (down) “EQUIPMENT” is displayed but not selectable. button until the desired month is displayed. Press the button.
  • Page 92 20180713160204_32MKF6100_eng_BOOK Page 92 Friday, July 13 2018 16:21:28 JST QUICK SHIFTER You can check for a current problem with the CBR1000S1 “INITIALIZE” and “EQUIPMENT” are displayed PGM-FI system. but not selectable. CBR1000S1 You can check for a current problem with the ÖHLINS Smart EC system.
  • Page 93 20180713160204_32MKF6100_eng_BOOK Page 93 Friday, July 13 2018 16:21:28 JST Instruments (Continued) Reduce speed and have your motorcycle SPORTS KIT ECU inspected by your dealer as soon as possible. “SPORTS KIT ECU USAGE” is displayed but not usable. DTC indexes To return to the upper level hierarchy, press button.
  • Page 94 20180713160204_32MKF6100_eng_BOOK Page 94 Friday, July 13 2018 16:21:28 JST Lap Timer You can check and clear the recorded lap time data in the setting mode. You can record lap time in the circuit mode. (P.61) (P.62) (P.30) Best icon Stopwatch/ (Displayed when the fastest lap difference with the best lap time displayed.)
  • Page 95 20180713160204_32MKF6100_eng_BOOK Page 95 Friday, July 13 2018 16:21:28 JST Instruments (Continued) The lap time data include lap time, maximum Maximum vehicle speed: vehicle speed, maximum engine revolutions, 0 to 299 km/h (0 to 186 mph) maximum coolant temperature, maximum acceleration, maximum deceleration, Maximum engine revolutions: maximum left bank angle and maximum right 0 to 20000 r/min (rpm)
  • Page 96 20180713160204_32MKF6100_eng_BOOK Page 96 Friday, July 13 2018 16:21:28 JST To record lap time, press the button at To Measure the Lap Time each lap. Press and hold the button or select the The stopwatch changes to display of the “CIRCUIT” menu on the “DISPLAY MODE” difference with the best lap.
  • Page 97 20180713160204_32MKF6100_eng_BOOK Page 97 Friday, July 13 2018 16:21:28 JST Instruments (Continued) To restart the measurement Press the button again. The stopwatch Difference with the best lap restarts measurement. Previous lap number Measurement starts from the next lap. To Check or Clear the Lap Time Select the “LAP TIME”...
  • Page 98 20180713160204_32MKF6100_eng_BOOK Page 98 Friday, July 13 2018 16:21:28 JST Pop-up information If your motorcycle has a problem with the PGM-FI and ÖHLINS Smart EC system, the In the following case, the INFO 3 display or failure information is displayed in priority to the INFO 3 display and coolant temperature other information.
  • Page 99 20180713160204_32MKF6100_eng_BOOK Page 99 Friday, July 13 2018 16:21:28 JST Instruments (Continued) Maintenance Information Indication Explanation Remedy When the periodic inspection Have your motorcycle inspected time of your motorcycle is by your dealer. approaching. When the oil change time of Change the engine oil. your motorcycle is approaching.
  • Page 100 20180713160204_32MKF6100_eng_BOOK Page 100 Friday, July 13 2018 16:21:28 JST Failure Information Indication Explanation Remedy When your motorcycle has a Reduce speed and have your problem with the PGM-FI motorcycle inspected by your system. dealer as soon as possible. Reduce speed and have your CBR1000S1 When your motorcycle has a motorcycle inspected by your...
  • Page 101 20180713160204_32MKF6100_eng_BOOK Page 101 Friday, July 13 2018 16:21:28 JST Indicators If one of these indicators does not come on when it should, have your dealer check for problems. Torque Control OFF indicator Comes on when the Torque Control is turned off. Shift indicators (P.101) Comes on briefly when the ignition switch is turned...
  • Page 102 20180713160204_32MKF6100_eng_BOOK Page 102 Friday, July 13 2018 16:21:28 JST High coolant temperature indicator Comes on briefly when the ignition switch is turned to the (On) position. If it comes on while riding: (P.183) ABS (Anti-lock Brake System) indicator Comes on when the ignition switch is turned to the (On) position.
  • Page 103 20180713160204_32MKF6100_eng_BOOK Page 103 Friday, July 13 2018 16:21:28 JST Indicators (Continued) HESD (Honda Electronic Steering Damper) indicator Comes on briefly when the ignition switch is turned to the (On) position. If it comes on while engine is running: (P.185) PGM-FI (Programmed Fuel Injection)
  • Page 104 20180713160204_32MKF6100_eng_BOOK Page 104 Friday, July 13 2018 16:21:28 JST Shift Indicators Example set value: 11,600 r/min (rpm) The shift indicators light or blink by the 0 to 10,800 r/min (rpm) engine revolutions. The first indicator lights All indicators go off when the engine revolutions reach a number 10,800 r/min (rpm) 800 r/min (rpm) below a preset revolution...
  • Page 105 20180713160204_32MKF6100_eng_BOOK Page 105 Friday, July 13 2018 16:21:28 JST Switches button Operate the lap timer Horn button Hazard switch Turn signal switch Switchable when the ignition switch is on. Can be Pressing the switch turns turned to off regardless of the ignition switch the turn signal off.
  • Page 106 20180713160204_32MKF6100_eng_BOOK Page 106 Friday, July 13 2018 16:21:28 JST Ignition Switch (On) Turns electrical system Switches the electrical system on/off, locks on for starting/riding. the steering. Key can be removed when in the (Off) or (Off) (Lock) position. Turns engine off. (Lock) Locks steering.
  • Page 107 20180713160204_32MKF6100_eng_BOOK Page 107 Friday, July 13 2018 16:21:28 JST Switches (Continued) Steering Lock Locking Turn the handlebars all the way to the left. Lock the steering when parking to help Push the key down, and turn the ignition prevent theft. switch to the (Lock) position.
  • Page 108 20180713160204_32MKF6100_eng_BOOK Page 108 Friday, July 13 2018 16:21:28 JST Riding mode You can change the riding mode. Current riding mode The riding mode consists of the following parameters. P: Engine output level T: Torque control level W: Wheelie control level EB: Engine brake level S mode CBR1000S1...
  • Page 109 MODE 1, MODE 2 and MODE 3 MODE 1 is suitable for track riding. USER 1 and USER 2 MODE 2 is suitable for winding roads. CBR1000RA MODE 3 is suitable for street riding. Each value can be changed. CBR1000RA CBR1000S1 Each value can not be changed.
  • Page 110 20180713160204_32MKF6100_eng_BOOK Page 110 Friday, July 13 2018 16:21:28 JST P value (Engine output level) W value (Wheelie control level) P value has five setting levels. W value has four setting levels. Available setting range: 1 to 5 Available setting range: 1 to 3 Level 1 has the most power.
  • Page 111 20180713160204_32MKF6100_eng_BOOK Page 111 Friday, July 13 2018 16:21:28 JST Riding mode (Continued) Selecting the riding mode MODE 1 Stop the motorcycle. Select the riding mode display. (P.33) Press the (up) or (down) MODE 2 button with the throttle fully closed. (up) button MODE 3 USER 1...
  • Page 112 20180713160204_32MKF6100_eng_BOOK Page 112 Friday, July 13 2018 16:21:28 JST Setting the riding mode Press the button until T value is MODE selected. CBR1000RA Press the (up) or (down) You can change the P, T, W and EB values on button until the desired value is displayed.
  • Page 113 20180713160204_32MKF6100_eng_BOOK Page 113 Friday, July 13 2018 16:21:28 JST Riding mode (Continued) CBR1000S1 Press the button until S mode is MODE selected. CBR1000S1 Press the (up) or (down) button until the desired mode is displayed. Press and hold the button until MODE ordinary display is displayed You can stop setting the riding modes at any...
  • Page 114 20180713160204_32MKF6100_eng_BOOK Page 114 Friday, July 13 2018 16:21:28 JST CBR1000RA CBR1000S1 Press the button MODE Press and hold the MODE CBR1000S1 button Press the (up) button Press the (down) button Press and hold the (down) button...
  • Page 115 20180713160204_32MKF6100_eng_BOOK Page 115 Friday, July 13 2018 16:21:28 JST Starting the Engine Start your engine using the following Make sure the engine stop switch is in the procedure, regardless of whether the engine (Run) position. Turn the ignition switch to the (On) is cold or warm.
  • Page 116 20180713160204_32MKF6100_eng_BOOK Page 116 Friday, July 13 2018 16:21:28 JST Shifting Gears Your motorcycle transmission has 6 forward If you put the motorcycle in gear with the gears in a one-down, five-up shift pattern. side stand down, the engine will shut off. Continued...
  • Page 117 20180713160204_32MKF6100_eng_BOOK Page 117 Friday, July 13 2018 16:21:28 JST Shifting Gears (Continued) Quick Shifter The Quick Shifter can be individually ● turned ON (active) and OFF (deactivate), CBR1000S1 This system enables very quick up and down also the shift pedal load level for shifting without clutch and throttle activating the Quick Shifter can be operations.
  • Page 118 20180713160204_32MKF6100_eng_BOOK Page 118 Friday, July 13 2018 16:21:28 JST Refuelling Opening the Fuel Fill Cap Ignition key Level plate Open the lock cover, insert the ignition key, and turn it clockwise to open the fuel fill cap. Closing the Fuel Fill Cap After refuelling, push the fuel fill cap closed until it locks.
  • Page 119 20180713160204_32MKF6100_eng_BOOK Page 119 Friday, July 13 2018 16:21:28 JST Storage Equipment WARNING Helmet Holder CBR1000RA Riding with a helmet attached to the The helmet holders are located underside of holder can interfere with your ability to the rear seat. safely operate the motorcycle and...
  • Page 120 20180713160204_32MKF6100_eng_BOOK Page 120 Friday, July 13 2018 16:21:28 JST Tool Kit/Document Bag CBR1000RA CBR1000RA Removing the rear seat (P.144) The tool kit and document bag are located CBR1000S1 under the rear seat. Removing the single seat cowl CBR1000S1 The tool kit and document bag are located (P.145)

  • Page 121: Maintenance

    20180713160204_32MKF6100_eng_BOOK Page 121 Friday, July 13 2018 16:21:28 JST Maintenance Please read “Importance of Maintenance” and “Maintenance Fundamentals” carefully before attempting any maintenance. Refer to “Specifications” for service data. Importance of Maintenance ......P. 119 Side Stand ............P. 156 Maintenance Schedule........

  • Page 122: Importance Of Maintenance

    20180713160204_32MKF6100_eng_BOOK Page 122 Friday, July 13 2018 16:21:28 JST Importance of Maintenance Importance of Maintenance Maintenance Safety Keeping your motorcycle well-maintained is Always read the maintenance instructions absolutely essential to your safety and to before you begin each task, and make sure that protect your investment, obtain maximum you have the tools, parts, and skills required.

  • Page 123: Maintenance Schedule

    Maintenance work should be performed in accordance with Honda's standards and Honda recommends that your dealer should specifications by properly trained and equipped road test your motorcycle after each periodic technicians. Your dealer meets all of these maintenance is carried out.
  • Page 124 Inspect (clean, adjust, lubricate, or replace, if necessary) you have the necessary tools and are mechanically skilled. Replace Procedures are provided in an official Honda Shop Manual. Lubricate : Technical. In the interest of safety, have your motorcycle serviced by your dealer.
  • Page 125 20180713160204_32MKF6100_eng_BOOK Page 125 Friday, July 13 2018 16:21:28 JST Maintenance Schedule Frequency Pre-ride Annual Regular Refer to Items Check × 1,000 km Check Replace page P. 125 × 1,000 mi Exhaust Gas Control Actuator Cable – Drive Chain Every 1,000 km (600 mi): Drive Chain Slider Brake Fluid 2 Years...
  • Page 126 Inspect (clean, adjust, lubricate, or replace, if necessary) you have the necessary tools and are mechanically skilled. Replace Procedures are provided in an official Honda Shop Manual. Lubricate : Technical. In the interest of safety, have your motorcycle serviced by your dealer.
  • Page 127 20180713160204_32MKF6100_eng_BOOK Page 127 Friday, July 13 2018 16:21:28 JST Maintenance Schedule Frequency Pre-ride Annual Regular Refer to Items Check × 1,000 km Check Replace page P. 125 × 1,000 mi Exhaust Gas Control Actuator Cable – Drive Chain Every 1,000 km (600 mi): Drive Chain Slider Brake Fluid 2 Years...

  • Page 128: Maintenance Fundamentals

    20180713160204_32MKF6100_eng_BOOK Page 128 Friday, July 13 2018 16:21:28 JST Maintenance Fundamentals Drive chain - Check condition and slack, Pre-ride Inspection ● adjust and lubricate if necessary. P. 157 To ensure safety, it is your responsibility to Brakes - Check operation; ●...
  • Page 129 20180713160204_32MKF6100_eng_BOOK Page 129 Friday, July 13 2018 16:21:28 JST Maintenance Fundamentals Replacing Parts Always use Honda Genuine Parts or their equivalents to ensure reliability and safety. Except GS, II GS type When ordering coloured components, specify the model name, colour, and code mentioned on the colour label.
  • Page 130 Your motorcycle has a lithium-ion (li-ion) battery. P. 129 NOTICE CBR1000RA An improperly disposed of battery can be Your motorcycle has a maintenance-free type harmful to the environment and human health. battery. You do not have to check the battery Always confirm local regulations for proper electrolyte level or add distilled water.
  • Page 131 20180713160204_32MKF6100_eng_BOOK Page 131 Friday, July 13 2018 16:21:28 JST Maintenance Fundamentals What to do in an emergency WARNING If any of the following occur, immediately see The battery gives off explosive your doctor. hydrogen gas during normal operation. Electrolyte splashes into your eyes: ●...
  • Page 132 Always replace the battery with another maintenance-free battery of the same type. NOTICE Installing non-Honda electrical accessories can overload the electrical system, discharging the battery and possibly damaging the system. Continued...
  • Page 133 20180713160204_32MKF6100_eng_BOOK Page 133 Friday, July 13 2018 16:21:28 JST Maintenance Fundamentals What to do in an emergency WARNING If any of the following occurs, immediately see The battery contains flammable organic your doctor. solvent as electrolyte. Electrolyte splashes into your eyes: ●...
  • Page 134 NOTICE If the terminals are heavily corroded, clean Installing non-Honda electrical accessories can and polish the terminals with a wire brush or overload the electrical system, discharging the sandpaper. Wear safety glasses.
  • Page 135 Selecting the Engine Oil Blown fuse For recommended engine oil, see “Specifications.” P. 219 If you use non-Honda engine oil, check the label to make sure that the oil satisfies all of the following standards: NOTICE JASO T 903 standard : MA ●...
  • Page 136 The API classification specifies the quality and Recommended brake fluid: performance rating of engine oils. Use SG or Honda DOT 4 Brake Fluid or equivalent higher oils, excluding oils marked as “Energy Conserving” or “Resource Conserving” on the Drive Chain circular API service symbol.
  • Page 137 20180713160204_32MKF6100_eng_BOOK Page 137 Friday, July 13 2018 16:21:28 JST Maintenance Fundamentals If the chain does not move smoothly, makes Cleaning and Lubricating strange noises, has damaged rollers, has loose After inspecting the slack, clean the chain and pins, has missing O-rings, or kinks, have the sprockets while rotating the rear wheel.
  • Page 138 Do not use a steam cleaner, a high pressure Recommended Coolant cleaner, a wire brush, volatile solvent such as Pro Honda HP Coolant is a pre-mixed solution petrol and benzene, abrasive cleaner, chain of antifreeze and distilled water. cleaner or lubricant NOT designed specifically...
  • Page 139 20180713160204_32MKF6100_eng_BOOK Page 139 Friday, July 13 2018 16:21:28 JST Maintenance Fundamentals Inspecting for Damage Tyres (Inspecting/Replacing) Checking the Air Pressure Inspect the tyres for Visually inspect your tyres and use an air cuts, slits, or cracks that pressure gauge to measure the air pressure at exposes fabric or least once a month or any time you think the cords, or nails or other...
  • Page 140 20180713160204_32MKF6100_eng_BOOK Page 140 Friday, July 13 2018 16:21:28 JST Maintenance Fundamentals Inspecting Tread Depth WARNING Inspect the tread wear indicators. If they Riding on tyres that are excessively become visible, replace the tyres immediately. worn or improperly inflated can cause a For safe riding, you should replace the tyres crash in which you can be seriously hurt when the minimum tread depth is reached.
  • Page 141 Always use the size and type of tyres Have the wheel balanced with Honda ● recommended in this owner's manual. Genuine balance weights or equivalent after the tyre is installed.
  • Page 142 20180713160204_32MKF6100_eng_BOOK Page 142 Friday, July 13 2018 16:21:28 JST Maintenance Fundamentals Air Cleaner GS, II GS, KO, II KO type This motorcycle is equipped with a viscous type air cleaner element. Air blow cleaning or any other cleaning can degrade the viscous element performance and cause the intake of dust.

  • Page 143: Tool

    20180713160204_32MKF6100_eng_BOOK Page 143 Friday, July 13 2018 16:21:28 JST Tool CBR1000RA CBR1000S1 The tool kit is stored under the rear seat. The tool kit is stored under the single seat cowl. P. 144 P. 145 You can perform some roadside repairs, minor...

  • Page 144: Removing & Installing Body Components

    20180713160204_32MKF6100_eng_BOOK Page 144 Friday, July 13 2018 16:21:28 JST Removing & Installing Body Components Battery CBR1000S1 Positive terminal Negative terminal CBR1000RA Positive terminal Negative terminal Battery Battery Rubber strap Rubber strap Continued...
  • Page 145 20180713160204_32MKF6100_eng_BOOK Page 145 Friday, July 13 2018 16:21:28 JST Removing & Installing Body Components Battery Removal Installation Make sure the ignition switch is in the Install the parts in the reverse order of (Off) position. removal. Always connect the positive + Remove the front seat.

  • Page 146: Front Seat

    20180713160204_32MKF6100_eng_BOOK Page 146 Friday, July 13 2018 16:21:28 JST Removing & Installing Body Components Front Seat Front Seat Removal Remove the mounting bolts and washers, Mounting bolts and then pull the front seat back and up. Installation Washer Install the front seat while inserting the Front seat tabs into the recesses.

  • Page 147: Rear Seat

    Removing & Installing Body Components Rear Seat Rear Seat Removal Move the seat strap forward. CBR1000RA Insert the ignition key into the seat lock. Rear seat Turn the ignition key clockwise, then pull the rear seat forward and up. Recess Installation Insert the tab into the recess.

  • Page 148: Single Seat Cowl

    20180713160204_32MKF6100_eng_BOOK Page 148 Friday, July 13 2018 16:21:28 JST Removing & Installing Body Components Single Seat Cowl Single Seat Cowl Removal Insert the ignition key into the seat lock. CBR1000S1 Turn the ignition key clockwise, then pull Single seat cowl the single seat cowl forward and up.

  • Page 149: Under Cowl

    20180713160204_32MKF6100_eng_BOOK Page 149 Friday, July 13 2018 16:21:28 JST Removing & Installing Body Components Under Cowl Under Cowl Removal Remove the pan screws and under cowl Under cowl bolts bolts. Remove the under cowl carefully release the guides from hooks of the middle cowl Under side as shown in the illustration.

  • Page 150: Engine Oil

    20180713160204_32MKF6100_eng_BOOK Page 150 Friday, July 13 2018 16:21:28 JST Engine Oil Checking the Engine Oil Oil fill cap If the engine is cold, idle the engine for 3 Upper level to 5 minutes. Turn the ignition switch to the (Off) position and wait for 2 to 3 minutes.
  • Page 151 20180713160204_32MKF6100_eng_BOOK Page 151 Friday, July 13 2018 16:21:28 JST Engine Oil Adding Engine Oil Adding Engine Oil Securely reinstall the oil fill cap. NOTICE If the engine oil is below or near the lower Overfilling with oil or operating with insufficient level mark, add the recommended engine oil.
  • Page 152 We recommend that you have your Drain bolt motorcycle serviced by your dealer. Use a new Honda Genuine oil filter or equivalent specified for your model. NOTICE Using the wrong oil filter can result in serious damage to the engine.
  • Page 153 20180713160204_32MKF6100_eng_BOOK Page 153 Friday, July 13 2018 16:21:28 JST Engine Oil Changing Engine Oil & Filter Remove the oil filter with a filter wrench Install the new oil filter and tighten. and let the remaining oil drain out. Make Torque: 26 N·m (2.7 kgf·m, 19 lbf·ft) sure the prior seal is not stuck to the engine.

  • Page 154: Coolant

    20180713160204_32MKF6100_eng_BOOK Page 154 Friday, July 13 2018 16:21:28 JST Coolant Checking the Coolant Reserve tank cap UPPER level Check the coolant level in the reserve tank while the engine is cold. Place your motorcycle on a firm, level surface. LOWER level Hold your motorcycle in an upright Reserve tank position.
  • Page 155 20180713160204_32MKF6100_eng_BOOK Page 155 Friday, July 13 2018 16:21:28 JST Coolant Changing Coolant Remove the reserve tank cap and add WARNING fluid while monitoring the coolant level. Removing the radiator cap while the Do not overfill above the UPPER level engine is hot can cause the coolant to mark.

  • Page 156: Brakes

    20180713160204_32MKF6100_eng_BOOK Page 156 Friday, July 13 2018 16:21:28 JST Brakes Checking Brake Fluid If the brake fluid level in either reservoir is below the LOWER level mark or the brake Place your motorcycle in an upright lever and pedal freeplay becomes excessive, position on a firm, level surface.
  • Page 157 The pads need to be replaced if a brake Rear Always replace both left and right brake pads pad is worn to the indicator. at the same time. Front Rear Pads CBR1000RA CBR1000S1 Pads Wear indicator Wear Wear Wear indicator Wear indicator...
  • Page 158 20180713160204_32MKF6100_eng_BOOK Page 158 Friday, July 13 2018 16:21:28 JST Brakes Adjusting the Brakelight Switch Adjusting the Brakelight Switch Check the operation of the brakelight switch. Hold the brakelight switch and turn the adjusting nut in the direction A if the switch operates too late, or turn the nut in the direction B if the switch operates too soon.

  • Page 159: Side Stand

    20180713160204_32MKF6100_eng_BOOK Page 159 Friday, July 13 2018 16:21:28 JST Side Stand Checking the Side Stand Start the engine, pull the clutch lever in, and shift the transmission into gear. Lower the side stand all the way. The engine should stop as you lower the side stand.

  • Page 160: Drive Chain

    20180713160204_32MKF6100_eng_BOOK Page 160 Friday, July 13 2018 16:21:28 JST Drive Chain Inspecting the Drive Chain Slack Check the drive chain slack at several points along the chain. If the slack is not constant at all points, some links may be kinked and binding.
  • Page 161 20180713160204_32MKF6100_eng_BOOK Page 161 Friday, July 13 2018 16:21:28 JST Drive Chain Adjusting the Drive Chain Slack Adjusting the Drive Chain Slack Lock nut Adjusting bolt Adjusting plate Adjusting the chain requires special tools. Have the drive chain slack adjusted by your dealer.
  • Page 162 20180713160204_32MKF6100_eng_BOOK Page 162 Friday, July 13 2018 16:21:28 JST Drive Chain Adjusting the Drive Chain Slack Turn both adjusting bolts an equal Tighten the rear axle nut. number of turns until the correct drive Torque: 135 N·m (13.8 kgf·m, 100 lbf·ft) chain slack is obtained.
  • Page 163 20180713160204_32MKF6100_eng_BOOK Page 163 Friday, July 13 2018 16:21:28 JST Drive Chain Checking the Drive Chain Slider Checking the Drive Chain Slider Checking the Drive Chain Wear Check the chain wear label when adjusting Check the condition of the drive chain slider. the drive chain.

  • Page 164: Clutch

    20180713160204_32MKF6100_eng_BOOK Page 164 Friday, July 13 2018 16:21:28 JST Clutch Checking the Clutch Check the clutch cable for kinks or signs of wear. If necessary have it replaced by your Checking the Clutch Lever Freeplay dealer. Lubricate the clutch cable with a Check the clutch lever freeplay.
  • Page 165 20180713160204_32MKF6100_eng_BOOK Page 165 Friday, July 13 2018 16:21:28 JST Clutch Adjusting the Clutch Lever Freeplay Adjusting the Clutch Lever Upper clutch cable adjuster Freeplay － Upper Adjustment Attempt adjustment with the upper clutch cable adjuster first. ＋ Turn the clutch cable adjuster until the freeplay is 10 - 20 mm (0.4 - 0.8 in).
  • Page 166 20180713160204_32MKF6100_eng_BOOK Page 166 Friday, July 13 2018 16:21:28 JST Clutch Adjusting the Clutch Lever Freeplay Lower Adjustment Lower lock nut Adjusting nut If the upper clutch cable adjuster is threaded out near its limit, or the correct freeplay cannot be obtained, attempt adjustment with the lower clutch cable adjusting nut.

  • Page 167: Throttle

    20180713160204_32MKF6100_eng_BOOK Page 167 Friday, July 13 2018 16:21:28 JST Throttle Checking the Throttle With the engine off, check that the throttle rotates smoothly from fully closed to fully open. If the throttle does not move smoothly, close automatically, have the motorcycle inspected by your dealer.

  • Page 168: Other Adjustments

    20180713160204_32MKF6100_eng_BOOK Page 168 Friday, July 13 2018 16:21:28 JST Other Adjustments Adjusting the Headlight Aim You can adjust vertical aim of the headlight for proper alignment. Turn the screw using a Phillips screwdriver provided in the tool kit P. 140. Obey local laws and regulations.

  • Page 169: Adjusting The Brake Lever

    20180713160204_32MKF6100_eng_BOOK Page 169 Friday, July 13 2018 16:21:28 JST Other Adjustments Adjusting the Brake Lever Adjusting the Brake Lever Index mark You can adjust the distance between the tip of the brake lever and handle grip. Adjuster Adjustment method Forward Turn the adjuster until the numbers align with the index mark while pushing the lever forward in the desired position.

  • Page 170: Adjusting The Front Suspension

    20180713160204_32MKF6100_eng_BOOK Page 170 Friday, July 13 2018 16:21:28 JST Other Adjustments Adjusting the Front Suspension Adjusting the Front Suspension Spring Preload CBR1000RA You can adjust the spring preload by the adjuster to suit the load or the road surface. The spring preload adjuster has 15 turns. Adjuster...
  • Page 171 20180713160204_32MKF6100_eng_BOOK Page 171 Friday, July 13 2018 16:21:28 JST Other Adjustments Adjusting the Front Suspension Rebound Damping CBR1000RA You can adjust the rebound damping by the TEN adjuster to suit the load or the road surface. Turn the adjuster using the BFR adjuster provided in the tool kit.
  • Page 172 20180713160204_32MKF6100_eng_BOOK Page 172 Friday, July 13 2018 16:21:28 JST Other Adjustments Adjusting the Front Suspension Compression Damping CBR1000RA You can adjust the compression damping by the COM adjuster to suit the load or the road surface. Turn the adjuster using the BFR adjuster COM adjuster provided in the tool kit.

  • Page 173: Adjusting The Rear Suspension

    Adjusting the Rear Suspension Pin spanner 2 3 4 5 6 7 8 Spring Preload CBR1000RA You can adjust the spring preload by the adjuster to suit the load or the road surface. Turn the adjuster using the pin spanner and Adjuster extension bar provided in the tool kit.
  • Page 174 20180713160204_32MKF6100_eng_BOOK Page 174 Friday, July 13 2018 16:21:28 JST Other Adjustments Adjusting the Rear Suspension Rebound Damping CBR1000RA You can adjust the rebound damping by the TEN adjuster to suit the load or the road surface. Turn the adjuster using the BFR adjuster provided in the tool kit.
  • Page 175 20180713160204_32MKF6100_eng_BOOK Page 175 Friday, July 13 2018 16:21:28 JST Other Adjustments Adjusting the Rear Suspension Compression Damping CBR1000RA You can adjust the compression damping by the COM adjuster to suit the load or the road surface. Turn the adjuster using the BFR adjuster provided in the tool kit.

  • Page 176: Adjusting The Öhlins Smart Ec System

    20180713160204_32MKF6100_eng_BOOK Page 176 Friday, July 13 2018 16:21:28 JST Other Adjustments Adjusting the ÖHLINS Smart EC System Adjusting the ÖHLINS Smart EC The front and rear suspension constantly determines riding conditions as SCU receives System signals from the different control units on the motorcycle.
  • Page 177 20180713160204_32MKF6100_eng_BOOK Page 177 Friday, July 13 2018 16:21:28 JST Other Adjustments Adjusting the ÖHLINS Smart EC System Front Spring Preload Make sure the ignition switch is in the (Off) position. You can adjust the spring preload by the Slide the connector cover, and then adjuster to suit the load or the road surface.
  • Page 178 20180713160204_32MKF6100_eng_BOOK Page 178 Friday, July 13 2018 16:21:28 JST Other Adjustments Adjusting the ÖHLINS Smart EC System Turn clockwise to increase spring preload Connect the front suspension connector (hard), or turn counterclockwise to to the coupler clip and then install the decrease spring preload (soft).
  • Page 179 20180713160204_32MKF6100_eng_BOOK Page 179 Friday, July 13 2018 16:21:28 JST Other Adjustments Adjusting the ÖHLINS Smart EC System Rear Spring Preload You can adjust the spring preload by the Adjuster adjuster knob to suit the load or the road surface. Turn clockwise to increase spring preload (hard), or turn counterclockwise to decrease spring preload (soft).
  • Page 180 20180713160204_32MKF6100_eng_BOOK Page 180 Friday, July 13 2018 16:21:28 JST Other Adjustments Adjusting the ÖHLINS Smart EC System Damping Adjustment “OBTi” allows the rider to affect the characteristics. You can select A-mode which automatically adjusts damping according to the riding Adjustable OBTi support items and riding situation and MANUAL mode which allows situations for each A-mode are as follows.
  • Page 181 20180713160204_32MKF6100_eng_BOOK Page 181 Friday, July 13 2018 16:21:28 JST Other Adjustments Adjusting the ÖHLINS Smart EC System BRAKE: ACC (A1 only): By adjusting the brake support objective it is By adjusting the acceleration objective it is possible to increase (+) or decrease (-) the possible to increase (+) or decrease (-) the pitching resistance during initial braking.
  • Page 182 20180713160204_32MKF6100_eng_BOOK Page 182 Friday, July 13 2018 16:21:28 JST Other Adjustments Adjusting the ÖHLINS Smart EC System CORNER (A1 only): GENERAL: By adjusting the corner objective it is possible By adjusting the firmness objective it is to increase (+) or decrease (-) the agile possible to increase (+) or decrease (-) the movements of the while turning.
  • Page 183 20180713160204_32MKF6100_eng_BOOK Page 183 Friday, July 13 2018 16:21:28 JST Other Adjustments Adjusting the ÖHLINS Smart EC System MANUAL mode Each MANUAL mode allows the following The suspension setting can be fixed at a damping level to be adjusted as desired: certain value on compression and rebound FR COM: Compression damping for front damping of the front and rear suspensions.

  • Page 184: Troubleshooting

    Low Oil Pressure Indicator ......P. 184 PGM-FI (Programmed Fuel Injection) Malfunction Indicator Lamp (MIL)....P. 184 ABS (Anti-lock Brake System) Indicator ..P. 185 HESD (Honda Electronic Steering Damper) Indicator ............P. 185 Torque Control Indicator......... P. 186 Tyre Puncture ........... P. 187...

  • Page 185: Engine Will Not Start (Hiss Indicator Stays On)

    20180713160204_32MKF6100_eng_BOOK Page 185 Friday, July 13 2018 16:21:28 JST Engine Will Not Start (HISS indicator stays on) Starter Motor Operates But Check if there are no any metallic seals or stickers on the key. Engine Does Not Start If the HISS indicator still stays on, have your motorcycle inspected by your Check the following items: dealer.

  • Page 186: Overheating (High Coolant Temperature Indicator Is On)

    20180713160204_32MKF6100_eng_BOOK Page 186 Friday, July 13 2018 16:21:28 JST Overheating (High coolant temperature indicator is on) The engine is overheating when the following Check that the radiator fan is operating, occurs: and then turn the ignition switch to the High coolant temperature indicator (Off) position.

  • Page 187: Warning Indicators On Or Flashing

    20180713160204_32MKF6100_eng_BOOK Page 187 Friday, July 13 2018 16:21:28 JST Warning Indicators On or Flashing Low Oil Pressure Indicator If the engine oil level goes down rapidly, your motorcycle may have a leak or another If the low oil pressure indicator comes on, serious problem.

  • Page 188: Abs (Anti-Lock Brake System) Indicator

    (19 mph). riding. Indicator does not come on when the ● ignition switch is in the (On) position. HESD (Honda Electronic Indicator does not go off at speeds above ● Steering Damper) Indicator 10 km/h (6 mph). If the indicator comes on while riding, you may have a serious problem with the HESD.

  • Page 189: Torque Control Indicator

    20180713160204_32MKF6100_eng_BOOK Page 189 Friday, July 13 2018 16:21:28 JST Warning Indicators On or Flashing Torque Control Indicator Torque Control Indicator Even when the Torque Control indicator is on, your motorcycle will have normal riding If the indicator operates in one of the ability without Torque Control function.

  • Page 190: Tyre Puncture

    20180713160204_32MKF6100_eng_BOOK Page 190 Friday, July 13 2018 16:21:28 JST Tyre Puncture Repairing a puncture or removing a wheel WARNING requires special tools and technical expertise. Riding your motorcycle with a We recommend you have this type of service temporary tyre repair can be risky. If the performed by your dealer.
  • Page 191 20180713160204_32MKF6100_eng_BOOK Page 191 Friday, July 13 2018 16:21:28 JST Tyre Puncture Removing Wheels When removing and installing the wheel, be CBR1000RA careful not to damage the wheel speed Brake caliper sensor and pulser ring. Front Wheel Wheel speed Mounting Removal...
  • Page 192 20180713160204_32MKF6100_eng_BOOK Page 192 Friday, July 13 2018 16:21:28 JST Tyre Puncture Removing Wheels On the right side, remove the mounting CBR1000RA bolts and remove the brake caliper. Right side collar On the left side, remove the mounting bolts and remove the brake caliper.
  • Page 193 Loosen the left axle pinch bolts. CBR1000S1 On the left side, withdraw the front axle Axle pinch bolts Left side collar shaft, and remove the side collars and wheel. CBR1000RA Axle pinch bolts Left side collar Front axle shaft Front axle shaft...
  • Page 194 Align the end of the front axle shaft with the surface of the fork leg. CBR1000RA End of front Surface of axle shaft fork leg Tighten the left axle pinch bolts to hold the axle.
  • Page 195 NOTICE the mounting bolts. When installing a wheel or caliper into original position, carefully fit the brake disc between the CBR1000RA pads to avoid scratching them. Torque: 45 N·m (4.6 kgf·m, 33 lbf·ft). Lower the front wheel on the ground.
  • Page 196 20180713160204_32MKF6100_eng_BOOK Page 196 Friday, July 13 2018 16:21:28 JST Tyre Puncture Removing Wheels Rear Wheel Remove the drive chain from the driven sprocket by pushing the rear wheel Removal forward. Place your motorcycle on a firm, level Remove the rear axle shaft, adjusting surface.
  • Page 197 20180713160204_32MKF6100_eng_BOOK Page 197 Friday, July 13 2018 16:21:28 JST Tyre Puncture Removing Wheels Remove the brake caliper bracket, rear Installation wheel and side collars. To install the rear wheel, reverse the Support the brake caliper assembly so removal procedure. that it doesn’t hang from the brake Take care to prevent the brake caliper hose.
  • Page 198 20180713160204_32MKF6100_eng_BOOK Page 198 Friday, July 13 2018 16:21:28 JST Tyre Puncture Removing Wheels Make sure that the lug on the brake Adjust the drive chain. P. 158 caliper bracket is positioned in the slot on Install and tighten the rear axle nut. the swingarm.

  • Page 199: Electrical Trouble

    Electrical Trouble Battery Goes Dead CBR1000S1 Battery charging is needed. A battery charger recommended by your CBR1000RA Charge the battery using a motorcycle lithium-ion (li-ion) battery manufacturer is battery charger. needed for battery charging. Remove the battery from the motorcycle Contact your dealer before charging the before charging.

  • Page 200: Burned-Out Light Bulb

    20180713160204_32MKF6100_eng_BOOK Page 200 Friday, July 13 2018 16:21:28 JST Electrical Trouble Burned-out Light Bulb Burned-out Light Bulb Headlight All light bulbs on the motorcycle are LEDs. If there is an LED which is not turned on, see your dealer for servicing. Headlights The headlights use several LEDs.
  • Page 201 20180713160204_32MKF6100_eng_BOOK Page 201 Friday, July 13 2018 16:21:28 JST Electrical Trouble Burned-out Light Bulb Brakelight/Taillight Front Turn Signal Light Front turn signal light Brakelight/Taillight The front turn signal lights uses several LEDs. The brakelight and taillight uses several LEDs. If there is an LED which is not turned on, see If there is an LED which is not turned on, see your dealer for servicing.
  • Page 202 20180713160204_32MKF6100_eng_BOOK Page 202 Friday, July 13 2018 16:21:28 JST Electrical Trouble Burned-out Light Bulb Rear Turn Signal Light License Plate Light Rear turn signal lights License plate light The rear turn signal lights uses several LEDs. If there is an LED which is not turned on, see The license plate light uses an LED.

  • Page 203: Blown Fuse

    20180713160204_32MKF6100_eng_BOOK Page 203 Friday, July 13 2018 16:21:28 JST Electrical Trouble Blown Fuse Blown Fuse Fuse box cover Before handling fuses, see “Inspecting and Replacing Fuses.” P. 132 Fuse Box Fuses Remove the front seat. P. 143 Remove the fuse box cover. Pull the fuses out one by one with the Spare fuses fuse puller in the tool kit and check for a...
  • Page 204 20180713160204_32MKF6100_eng_BOOK Page 204 Friday, July 13 2018 16:21:28 JST Electrical Trouble Blown Fuse Main Fuse & FI Fuse Remove the front seat. P. 143 Remove the starter magnetic switch Starter magnetic cover. switch cover Main fuse Pull the main fuse and FI fuse out one by one and check for a blown fuse.

  • Page 205: Information

    20180713160204_32MKF6100_eng_BOOK Page 205 Friday, July 13 2018 16:21:28 JST Information Keys..............P. 203 Instruments, Controls, & Other Features... P. 204 Caring for Your Motorcycle ......P. 207 Storing Your Motorcycle ....... P. 211 Transporting Your Motorcycle..... P. 212 You & the Environment ......... P. 213 Serial Numbers ..........

  • Page 206: Keys

    20180713160204_32MKF6100_eng_BOOK Page 206 Friday, July 13 2018 16:21:28 JST Keys Keys If you lose a key, make another duplicate key immediately. Ignition Key To make a duplicate key and register it with your This motorcycle has two ignition keys and a key HISS system, take the spare key, the key tag, and tag with a key number and a bar code.

  • Page 207: Instruments, Controls, & Other Features

    Do not turn the key while riding. HISS Engine Stop Switch The Honda Ignition Security System (HISS) Do not use the engine stop switch except in an immobilizes the engine's ignition system if an emergency. Doing so when riding will cause the...
  • Page 208 20180713160204_32MKF6100_eng_BOOK Page 208 Friday, July 13 2018 16:21:28 JST Instruments, Controls, & Other Features If the ignition switch is turned to the (On) position with the engine stop switch in the South Africa only Singapore only (Run) position, the HISS indicator turns on and goes off after a few seconds to indicate it is OK to start the engine.
  • Page 209 20180713160204_32MKF6100_eng_BOOK Page 209 Friday, July 13 2018 16:21:28 JST Instruments, Controls, & Other Features Document Bag HESD The Honda Electronic Steering Damper (HESD) CBR1000RA The owner’s manual, registration, and insurance automatically controls the steering damper information can be stored in the plastic characteristics in accordance with vehicle speed document bag underside of the rear seat.

  • Page 210: Caring For Your Motorcycle

    This model is equipped with a Throttle by Wire Frequent cleaning and polishing is important to System. ensure the life of your Honda. A clean Do not put magnetized items or items motorcycle makes it easier to spot potential susceptible to magnetic interference near the problems.
  • Page 211 20180713160204_32MKF6100_eng_BOOK Page 211 Friday, July 13 2018 16:21:28 JST Caring for Your Motorcycle Avoid directing water into the air cleaner, Washing Precautions muffler, and electrical parts. Follow these guidelines when washing: Thoroughly rinse your motorcycle with Do not use high-pressure washers: ●...
  • Page 212 20180713160204_32MKF6100_eng_BOOK Page 212 Friday, July 13 2018 16:21:28 JST Caring for Your Motorcycle Do not use wax or polishing compounds on CBR1000S1 ● ● Do not direct water under the single seat mat painted surface: cowl: Use a soft cloth or sponge, plenty of Water in the under single seat cowl water, and a mild detergent to clean mat compartment can damage your...
  • Page 213 20180713160204_32MKF6100_eng_BOOK Page 213 Friday, July 13 2018 16:21:28 JST Caring for Your Motorcycle Aluminium Components Windscreen Aluminium will corrode from contact with dirt, Using plenty of water, clean the windscreen with mud, or road salt. Clean aluminium parts a soft cloth or sponge. (Avoid using detergents regularly and follow these guidelines to avoid or any kind of chemical cleaner on the scratches:...

  • Page 214: Storing Your Motorcycle

    20180713160204_32MKF6100_eng_BOOK Page 214 Friday, July 13 2018 16:21:28 JST Storing Your Motorcycle Storing Your Motorcycle Exhaust Pipe and Muffler The exhaust pipe and muffler are titanium and If you store your motorcycle outdoors, you stainless steel but may become stained by mud should consider using a full-body motorcycle or dust.

  • Page 215: Transporting Your Motorcycle

    20180713160204_32MKF6100_eng_BOOK Page 215 Friday, July 13 2018 16:21:28 JST Transporting Your Motorcycle Transporting Your Remove the battery ( P. 141) to prevent ● discharge. Fully charge the battery and then Motorcycle place it in a shaded, well-ventilated area. If you leave the battery in place, If your motorcycle needs to be transported, it disconnect the negative - terminal to should be carried on a motorcycle trailer or a...

  • Page 216: You & The Environment

    20180713160204_32MKF6100_eng_BOOK Page 216 Friday, July 13 2018 16:21:28 JST You & the Environment You & the Environment coolant, and cleaning solvents contain poisons that can hurt refuse workers and contaminate Owning and riding a motorcycle can be drinking water, lakes, rivers, and oceans. enjoyable, but you must do your part to protect the environment.

  • Page 217: Serial Numbers

    20180713160204_32MKF6100_eng_BOOK Page 217 Friday, July 13 2018 16:21:28 JST Serial Numbers Serial Numbers The frame and engine serial numbers uniquely identify your motorcycle and are required in order to register your motorcycle. They may also be required when ordering replacement parts.

  • Page 218: Fuels Containing Alcohol

    20180713160204_32MKF6100_eng_BOOK Page 218 Friday, July 13 2018 16:21:28 JST Fuels Containing Alcohol Fuels Containing Alcohol The use of petrol containing more than 10% ethanol may: Some conventional fuels blended with alcohol Damage the painting of the fuel tank. ● are available in some locales to help reduce Damage the rubber tubes of the fuel line.

  • Page 219: Catalytic Converter

    A defective catalytic converter contributes to air pollution and can impair your engine's performance. A replacement unit must be an original Honda part or equivalent.

  • Page 220: Specifications

    20180713160204_32MKF6100_eng_BOOK Page 220 Friday, July 13 2018 16:21:28 JST Specifications Main Components ■ Rider and 1 CBR1000RA passenger Overall length 2,065 mm (81.3 in) Passenger capacity Rider only (no Overall width 720 mm (28.3 in) CBR1000S1 passenger) Overall height 1,125 mm (44.3 in)
  • Page 221 120/70ZR17M/C (58W) Tyre size 1.500 Rear 190/50ZR17M/C (73W) Gear ratio Tyre type Radial, tubeless 1.333 BRIDGESTONE S21F E 1.214 CBR1000RA DUNLOP D214F Y 1.137 Front BRIDGESTONE RS10F N Reduction ratio 1.717 / 2.688 (primary / final) CBR1000S1 PIRELLI DIABLO SUPERCORSA SP...
  • Page 222 20180713160204_32MKF6100_eng_BOOK Page 222 Friday, July 13 2018 16:21:28 JST Specifications Idle speed 1,200 ± 100 rpm Drive sprocket Standard sprocket size Honda 4-stroke motorcycle oil API Service Driven sprocket Classification SG or higher, excluding oils Recommended *1 : EU regulation marked as “Energy Conserving” or engine oil “Resource Conserving,”...
  • Page 223 Oil filter 26 N·m (2.7 kgf·m, 19 lbf·ft) Front wheel axle 79 N·m (8.1 kgf·m, 58 lbf·ft) bolt Front wheel brake CBR1000RA 45 N·m (4.6 kgf·m, 33 lbf·ft) caliper mounting CBR1000S1 40 N·m (4.1 kgf·m, 30 lbf·ft) bolt Front wheel axle 22 N·m (2.2 kgf·m, 16 lbf·ft)

  • Page 224: Index

    20180713160204_32MKF6100_eng_BOOK Page 224 Friday, July 13 2018 16:21:28 JST Index License Plate Light........... 199 ABS (Anti-lock Brake System)....... 18 Rear Turn Signal..........199 ABS (Anti-lock Brake System) Button Indicator ..........99, 185 Horn..............102 Accessories ............21 LAP ............... 30, 102 Air Cleaner............
  • Page 225 20180713160204_32MKF6100_eng_BOOK Page 225 Friday, July 13 2018 16:21:28 JST Date & Time ............76 Oil............... 132, 147 Display Oil Filter.............. 149 Background ............69 Overheats ............183 Blank..............47 Starting............... 112 Brightness ............68 Stop Switch ........103, 112, 204 Check .............
  • Page 226 Date & Time ............76 Image Labels ............7 Restore Default........... 81 Units ..............77 Hazard Switch..........102 Headlight Aim ..........165 Headlight Dimmer Switch ......102 Helmet Holder..........116 HESD (Honda Electronic Steering Damper)........100, 185, 206 High Beam Indicator........99...
  • Page 227 Indicator INFO 3 Display..........45 ABS (Anti-lock Brake System) ....99, 185 Instruments ............28 Gear Position............29 HESD (Honda Electronic Steering Damper) ..........100, 185 Label High beam............99 Accessories and Loading Warning ....11 High Coolant Temperature ....99, 183 Battery ..............
  • Page 228 20180713160204_32MKF6100_eng_BOOK Page 228 Friday, July 13 2018 16:21:28 JST Light Tachometer Red Zone........28 Brakelight/Taillight........... 198 Tripmeter ..........34, 35, 204 Bulb ..............197 Mileage .............. 79 Front Turn Signal ..........198 Mode License Plate ............. 199 Circuit..............30 Rear Turn Signal..........199 DISPLAY..............
  • Page 229 20180713160204_32MKF6100_eng_BOOK Page 229 Friday, July 13 2018 16:21:28 JST Coolant............... 135 P Value ............. 107 Fuel..............115 Parking ............... 19 Oil ................ 132 Parts Location........... 24 Refuelling ............115 Passing Light Control Switch...... 102 Removal Petrol............115, 215 Battery ..............141 PGM-FI (Programmed Fuel Injection) Front Seat ............
  • Page 230 20180713160204_32MKF6100_eng_BOOK Page 230 Friday, July 13 2018 16:21:28 JST Service Storage DTC................ 89 Equipment ............116 Maintenance ............85 Owner’s Manual........116, 206 Quick Shifter............89 Tool Kit ............... 116 Sports Kit ECU............. 90 Storing Your Motorcycle ......211 Suspension............88 Street Mode ............
  • Page 231 20180713160204_32MKF6100_eng_BOOK Page 231 Friday, July 13 2018 16:21:28 JST Wheels T Value ............. 107 Front Removal ..........188 Tachometer .......... 28, 39, 66 Rear Removal............ 193 Throttle ............ 164, 207 Throttle Grip Angle ......... 46 Torque Control Indicator ....... 98 Torque Control OFF Indicator.......

This manual is also suitable for:

Cbr1000s1

Table of Contents