Rear Wheel - Honda CBR125R Owner's Manual

REAR WHEEL

REMOVAL
Support the motorcycle using a safety stand or
hoist, raise the rear wheel off the ground.
Loosen the lock nut, drive chain adjusting nut and
axle nut.
Push the rear wheel forward.
Derail the drive chain from the driven sprocket.
Remove the axle nut.
Remove the axle and rear wheel.
Do not operate the
brake pedal after
removing the rear
wheel.
Remove the side collars.
INSPECTION
AXLE
Place the axle on V-blocks.
Turn the axle and measure the runout using a dial
indicator.
Actual runout is 1/2 of the total indicator reading.
SERVICE LIMIT: 0.2 mm (0.01 in)
REAR WHEEL/SUSPENSION
NUT/AXLE
DRIVE
CHAIN
WASHER
LEFT SIDE: RIGHT SIDE:
COLLARS
LOCK NUT
ADJUSTING
NUT
14-5