Honda CBR125R Owner's Manual page 329

Check the rubber bushings for wear, damage or
fatigue and replace if necessary.
ASSEMBLY
DRIVE CHAIN SLIDER
COLLAR
5.9 N·m (0.6 kgf·m, 4.4 lbf·ft)
Install the drive chain slider while aligning the swin-
garm tabs with the slider slits.
Install the collar and drive chain slider screw, then
tighten the screw to the specified torque.
TORQUE: 5.9 N·m (0.6 kgf·m, 4.4 lbf·ft)
SWINGARM
REAR WHEEL/SUSPENSION
BUSHINGS
RUBBER COLLAR
DRIVE CHAIN
ADJUSTER
CHAIN SLIDER
Align SCREW/COLLAR
14-15