Warning - GRAUPNER mz-24 Pro Programming Manual

Warning

Model Memory Specific Warning Settings
Use this menu to turn off or on the five visual and
acoustic alarm triggers. Typically, only the throttle
servo (CH1-POS) is actively monitored. Other option
settings in this menu include Throttle Hold, Throttle
Cut, Phase and Power OFF time.
To adjust these settings, from the main display press
the SYSTEM menu gear icon (purple "S") to bring up
the SYSTEM submenu screen:
000%
000:00.0
000 000
mz
000:00.0
0:01:23
M - 1
000 000
PHASE 1
MODELLNAME 1
BATT TIME 00: 01: 23
000
From the SYSTEM submenu, press the Warning icon:
BACK BASE FUNCTION
ST mode Warning Etc. Set
Press
Stick Cali MP3
Notice
These settings are model memory specific. Re-
set these options individually for each model
memory.
210 System menu - Warning
To toggle between
000%
field in the option line, as shown below:
4.2V
Press
000
SYSTEM
Display
The Throttle Cut line provides the
When the Throttle Cut is active, the
vates the option in reverse, as though the Throttle Cut
is switched off.
Warning
BACK
Throttle Hold OFF
Throttle Cut OFF
Thro Position ON
Phase OFF
Power OFF time OFF
ON and OFF , press the value
BACK Warning
Throttle Hold OFF
Throttle Cut OFF
Press
Thro Position ON
Phase OFF
Power OFF time OFF
BACK Warning
Throttle Hold ON
Throttle Cut OFF
Thro Position ON
Phase OFF
Power OFF time OFF
REV option:
Warning
BACK
Throttle Hold ON
Throttle Cut REV
Thro Position ON
Phase OFF
Power OFF time OFF
REV
option acti-
The Power OFF time option allows users to specify
how long the transmitter should wait before begin-
ning the shut-down process. The transmitter begins
the shut-down process after three minutes of inac-
tivity, and will give a warning before turning itself off.
Choose the time it takes to turn off after the warning
(in seconds and minutes): OFF, 30 s, 1m, 5m, 10m,
20m, 30m and 60m. Press the value field in the Pow-
er OFF time line to select:
BACK Warning
Throttle Hold ON
Throttle Cut REV
Thro Position ON
Phase OFF
Power OFF time 1m
Press the BACK button at the top left to return to the
SYSTEM menu:
BACK BASE FUNCTION
ST mode Warning Etc. Set
Stick Cali MP3
SYSTEM
Display