E.p.a - GRAUPNER mz-24 Pro Programming Manual

E.P.A

Setting the E.P.A
End Point Adjustments allows definition of the maxi-
mum servo travel for any channel. This feature is help-
ful with components, such as wing flaps, that may get
damaged by excessive movements.
To set the E.P.A, from the main display press the BASE
menu gear icon (green "B") to bring up the BASE sub-
menu screen:
000%
000:00.0
000 000
mz
000:00.0
0:01:23
Press
M - 1
000 000
PHASE 1
MODELLNAME 1
BATT TIME 00: 01: 23
000
From the BASE submenu display, press the E.P.A
icon:
BACK BASE FUNCTION
Model Sel Model Type E.P.A REV/SUB
Press
TX ctl Timer Fail Safe Trim Step
CTL Set Out.Swap Telemetry Announce
E.P.A. Adjustment
In the E.P.A display, the parameters are set as they
relate to the servo, i.e. the servo path and angle of
rotation or its limit.
BACK E.P.A
CH 1. 150% 100% 100% 150%
CH 2. 150%
100% 100% 150%
CH 3. 150% 100% 100% 150%
CH 4. 150% 100% 100% 150%
CH 5. 150% 100% 100% 150%
– Limit – Travel + Limit +
62 Base menu - Servo path/Servo limit
The set values always correspond to the settings in
the BASE submenu REV/SUB.
Tip
Press the NEXT
to scroll through the channel screens.
To change a value, press the desired button. In the
000%
example below, Channel 3 Travel:
4.2V
000
The field highlights blue:
SYSTEM
THR.CUT
Servo
Press the INC
the display to increase/decrease the value of the ac-
tive field. Press the
value back to the default. Alternatively, press the ar-
row keys ( pq ) to the left of the display screen to
achieve the same result.
SERVO Use the same procedure for all settings.
To advance directly to the BASE submenu Servo dis-
NEXT
play, press the
INC of the screen. Alternatively, simultaneously press the
arrow keys ( pq ) to the left of the display (while no
RES
fields are highlighted) to also bring up the Servo dis-
DEC
play:
button on the right side of the display
BACK E.P.A SERVO
CH 1. 150% 100% 100% 150%
CH 2. 150% 100% 100% 150% NEXT
CH 3. 150% 100% 100% 150% INC
CH 4. 150% 100% 100% 150% RES
Press
DEC
CH 5. 150% 100% 100% 150%
– Limit – Travel + Limit +
BACK E.P.A SERVO
CH 1. 150% 100% 100% 150%
CH 2. 150% 100% 100% 150% NEXT
INC
CH 3. 150% 100% 100% 150%
CH 4. 150% 100% 100% 150% RES
CH 5. 150% 100% 100% 150% DEC
– Travel +
– Limit Limit +
or DEC button at the right edge of
RES button to reset the changed
SERVO button in the top right corner
BACK E.P.A
CH1 150% 104% 097% 150%
CH2 150% 111% 88% 150%
CH3 150% 107% 115% 150%
CH4 150% 077% 076% 150%
CH5 150% 088% 111% 150%
– Travel +
– Limit Limit +
Press the TEST button to activate the Servo Test
function (page 87):
BACK NORMAL Servo
1 2 3 4 5 6 7 8 9 10 11 12
000% 000% 000% 000% 000% 000%
000% 000% 000% 000% 000%
BACK NORMAL
Servo
1 2 3 4 5 6 7 8 9 10 11 12
000% 000% 000% 000% 000% 000%
000% 000% 000% 000% 000%
Upon activating one or more control elements of the
transmitter, the resulting servo travel is graphically
displayed, as shown below:
BACK NORMAL Servo
1 2 3 4 5 6 7 8 9 10 11 12
–100% –061% +100% 000% 000% 000%
+100% +061% 000% 000% 000%
Press the BACK button to return to the E.P.A display
screen.
SERVO
Press
NEXT
INC
RES
DEC
TEST
Press
000%
VIEW
+0.5s
INC
RES
DEC
START
000%
TEST
000%