GRAUPNER mz-24 Pro Programming Manual page 27

Assigning Logical Switch or Control
• Switch Assignment
Logical switches can be assigned to a function
wherever there is a CTL value field. In the example
below, the D/R,EXP display menu has a CTL line:
BACK
PHASE 1 D/R,EXP
CH CH 2
D/R +100% +100%
EXP 000% 000%
CTL NULL
SYM OFF
To assign a switch, press NULL
line:
BACK PHASE 1 D/R,EXPO
CH CH 2
D/R +100% +100%
Press
EXP 000% 000%
CTL NULL
SYM OFF
The active window will appear:
BACK PHASE 1 D/R,EXP
CH CH 2
Select
NO
D/R +100% +100%
CLR
EXP 000% 000%
LOGIC
CTL NULL
SYM OFF
Move the desired switch. In the example below,
the front left 3-way switch S5 is assigned:
SERVO
The assigned switch appears in the CTL value
field. Press the
INC
RES
• Switch Setup
DEC
For certain functions, the exact switch position
needs to be assigned.
PHASE3 needs to be assigned to S1:
button in the CTL
SERVO
1.
2.
3.
INC
4.
RES
5.
DEC
Press the
pears (as described above). Flip the S1 switch. As
soon as the switch is flipped, an accessory display
SERVO will appear:
INC
RES
DEC
BACK PHASE 1 D/R,EXP SERVO
CH CH 2
D/R +100% +100% INC
EXP 000% RES
000%
CTL SW 5 DEC
SYM OFF
BACK button to save and exit.
In the example below,
BACK PHASE SET NEXT
PHASE SLOW CTL NEW
NORMAL 0.0s NAM
START 0.0s SW 1 CPY
PHASE 3 0.0s NULL DEL
INC
PHASE 4
PHASE 5 DEC
NULL
button. The active window ap-
BACK

OFF
SW 1
OFF
OFF
Press any OFF button at any time to activate the
switch position. The value field will change to ON
and the switch graphic display will color in blue
(up), green (center), or red (down). In the example
below, the down switch direction was activated:
BACK

OFF
SW 1
OFF
ON
This switch position must be logically matched
with the other switch positions.
To remove the position assignment, press the
button to change the field to OFF.
Notice
When none of the assigned phase switches
are in the "ON" position, the default "normal
phase" (Phase 1) will activate.
If a 2-stage switch is chosen instead of a 3-stage
switch, the center position option will disappear.
In the example below, the 2-stage S6 was chosen:
BACK

OFF
SW 6
OFF
Select the desired switch direction by pressing the
appropriate OFF button.
Control and switch assignment
ON
27