GRAUPNER mz-24 Pro Programming Manual page 135

BACK PHASE 1 Prog.MIX
NONE NONE
>>
CH1 CH2 CH3 CH4 CLR
CH5 CH6 CH7 CH8
Press
CH9 CH10 CH11 CH12
As soon as the control function is selected, its val-
ue is transferred to the active MST field:
BACK PHASE 1 Prog. MIX
CH1 NONE
>>
CH1 CH2 CH3 CH4 CLR
CH5 CH6 CH7 CH8
CH9 CH10 CH11 CH12
Press the CLR button to reset the default value in
the blue field ( NONE ).
Notice
Do not forget to assign switches to the select-
ed control functions 5 to 12 in the BASE sub-
menu CTL Set (page 90).
• SLV
To choose the target (slave) channel for mixer out-
NONE
put, press the second (right)
BACK
PHASE 1 Prog. MIX
CH1 NONE
>>
Press
CH1 CH2 CH3 CH4 CLR
CH5 CH6 CH7 CH8
CH9 CH10 CH11 CH12
The button highlights blue:
SERVO
BACK
CH1
CH1
CH5
CH9
Press to select control function 1 to 12. In the ex-
ample below, CH3 needs to be assigned:
SERVO
BACK
CH1
CH1
CH5
CH9
As soon as the control function is selected, its val-
ue is transferred to the active SLV field:
BACK
CH1
CH1
CH5
CH9
button:
Press the CLR
SERVO
the blue field ( NONE ).
Tip
A mixer programmed with the same input and output
channels (such as CH1 >> CH1) allows for special
effects when turning programmable mixers on and
off as desired.
SERVO
PHASE 1 Prog. MIX
NONE
>>
CH2 CH3 CH4 CLR
CH6 CH7 CH8
CH10 CH11 CH12
PHASE 1 Prog. MIX SERVO
NONE
>>
CH2 CH3 CH4 CLR
CH6 CH7 CH8
Press
CH10 CH11 CH12
PHASE 1 Prog. MIX SERVO
CH3
>>
CH2 CH3 CH4 CLR
CH6 CH7 CH8
CH10 CH11 CH12
button to reset the default value in
To store the selected settings, press the
ton at the top left of the display:
BACK PHASE 1 Prog. MIX
CH1 CH3
>>
Press
CH1 CH2 CH3 CH4 CLR
CH5 CH6 CH7 CH8
CH9 CH10 CH11 CH12
The Prog.MIX display screen appears with the mixer
selections showing in Line 1:
BACK PHASE 1 Prog. MIX
ACT MST SLV SET
INH CH1 CH3 >>
>>
1.
INH NONE NONE
2. >>
INH NONE
NONE >>
3.
INH NONE NONE
>>
4.
INH NONE NONE
5. >>
Function menu | general - Free mixer
BACK but-
SERVO
SERVO
LIN.MIX
NEXT
135