Table of Contents
Advertisement
Low voltage warning
GRAUBELE
S
0:00.0
#01
B a t t . m u s t
Flug
0:00.0
b e r e -
«normal »
3.5V
c h a r g e d ! !
HoTT
K78
M
0:22h
x
x
Battery use timer in the display
Use and menu functions
Four-way keys
ENT
TLM
VIEW
ESC
20 / 28
The transmitter battery voltage should be monitored in the display
during operation. In case the voltage drops under a preset threshold,
standard setting 3,6 V, an acoustic warning signal is emitted and in
the display appears in a window "battery needs charging".
0.0V
Now at the latest, the operation must be stopped and the transmit-
ter battery must be charged!
The battery use timer is shown in the lower left part of the display.
The battery use time is added at every use. After every charge the
timer is reset to "00:00". This happens only if the battery voltage
increases at least of 0,3V or if the battery is full.
Keys left of the display
Four-way keys (up, down, right, left)
By pushing one of these buttons in the base display the "Telemetry
data display" will appear.
By pushing the keys you can scroll the list according to the arrow
direction.
By simultaneous pushing the keys
already selected parameter which had been already modified
(CLEAR).
Pushing simultaneously the button
from the transmitter's base screen or from almost any menu posi-
tion to the "Hidden mode" menu.
Keys to the left of the display
Four-way keys:
ENT button
Pushing the ENT key will cause a jump from the displayed base screen
which appears as soon as the transmitter is switched on to the
multi-function menu
By pushing the ENT key it is possible to accede to a previously selected
menu point.
Within the setting menu activate and deactivate or confirm by push-
ing the ENT key.
ESC button
Pressing the ESC button brings about a stepwise return to function
selection or back to the basic display. Any setting changed in the
meantime is retained.
you can reset the value of an
and
will cause a jump
S1002.PRO_jh_V1
Advertisement
Table of Contents
