GRAUPNER mz-24 Pro Programming Manual page 183

To change a value, press the appropriate value field.
In the example below, the selected aileron travel must
be changed to 066%:
BACK PHASE 1 Aile di
AILE1 AILE3 AILE4 AILE2
Press
RATE A 100% 100% 100% 100%
RATE B 100% 100% 100% 100%
The field highlights blue:
BACK PHASE 1 Aile di
AILE1 AILE3 AILE4 AILE2
100% 100% 100% 100%
RATE A
RATE B 100% 100% 100% 100%
Press the INC or DEC buttons or the arrow keys
( pq ) to increase/decrease the value:
BACK PHASE 1 Aile di
AILE1 AILE2
AILE3 AILE4
RATE A 100% 100% 100% 100%
RATE B 066% 100% 100% 100%
Use the same procedure to adjust the other differenti-
ation values for all remaining ailerons.
Press the RES button to reset the changed value
back to the default.
To save and exit, press the
left of the display to return to the previous menu.
BACK
SERVO
Phase
INC
Snap roll
RES
DEC
Airbrake
SERVO
INC
RES
DEC
SERVO
INC
RES
DEC
BACK button at the top
BASE FUNCTION SYSTEM
D/R,EXPO THR.CRV Idle LOW Prog.MIX
Aile diff Wing MIX Flap MIX Flap set
TTrainer Logical sw Sequence V-Tail
Function menu | Airplane models - QR differentiation 183