GRAUPNER mz-24 Pro Programming Manual page 88

Touch NO to terminate the procedure.
Touch YES to start the servo test function. This func-
tion automatically controls the servos operating under
the assumption that the associated controls (starting
from the neutral position) will be simultaneously and
continuously moved back and forth between -100%
and +100% during the set period. All of the servos
that are active in the model memory move within the
set servo paths and servo path limits until the servo
test is stopped by touching the STOP
bottom right corner of the screen:
BACK PHASE 1 Servo
1 2 3 4 5 6 7 8 9 10 11 12
–100% –061% +100% –100% –100% –100%
–100% +061% –100% –100% –100%
88 Base menu - Servo monitor
button at the
TEST
+4.0s
INC
RES
Press
DEC
STOP
–100%