GRAUPNER mz-24 Pro Programming Manual page 40

Press NO to cancel. Press GLOBAL
selected model memory to Global (transmitter-specif-
ic HoTT-Synchronization):
BACK MODEL NAME 1
01 MODEL NAME 1
02 MODEL NAME 2
03 MODEL NAME 3 G
04 MODEL NAME 4 G
05 MODEL NAME 5 G
06 MODEL NAME 6 G
To change from Global to Standard (model-specific
HoTT-Synchronization), then the selection window
appear as below:
BACK MODEL NAME 1
01 MODEL NAME 1
02 MODEL NAME 2
03 MODEL NAME 3 G
04 MODEL NAME 4 G
Select
05 MODEL NAME 5 G model
06 MODEL NAME 6 G NO
Touch NO to cancel. Press MODEL
selected model memory back to Model (model mem-
ory specific HoTT-Synchronization).
• NOTE: Re-bind all receivers after changing the
HoTT Synchronization!
• Global bound receivers react to the signals of all
of the global bound model memories saved in the
transmitter. For safety reasons a model memory
change is only possible if the receiver system is
turned off.
40 Base menu - Model selection
to change the CAUTION
If a receiver system is accidentally
!
turned on after a model memory
change, it will react to control move-
NEXT
ments of every global-bound model memory as
SEL
soon as a valid signal is emitted from the trans-
NEW
mitter.
IMP.M
EXP.M
• Model-specific bound receivers react exclusively
RES
to the signal coming from the specifically assigned
CPY
model memory. Accidentally using a non-specifi-
cally assigned model memory is NOT possible.
Receivers turned on after a model memory change
will automatically pass into Fail-Safe Mode.
Tip
NEXT
SEL
Refer to the Import/Export from SD Card section for
NEW additional information regarding HoTT-Synchronization
after the copying, importing or exporting process (page
IMP.M
54).
EXP.M
RES
CPY
NEXT
Press the NEXT
to change the
the display to scroll through additional Model Memory
Lines:
01
02
03
04
05
06
There are six lines per screen:
(Page Change)
button at the top right cornier of
BACK MODEL NAME 1 NEXT
MODEL NAME 1 SEL
Press
MODEL NAME 2 NEW
MODEL NAME 3 IMP.M
G EXP.M
MODEL NAME 4
MODEL NAME 5 G RES
CPY
MODEL NAME 6 G
BACK MODEL NAME 1
07 MODEL NAME 7
08
MODEL NAME 8
09 MODEL NAME 9
10
MODEL NAME 10
11 MODEL NAME 11
12 MODEL NAME 12
The screens are cyclical; pressing NEXT after reach-
ing the screen displaying Lines 25 - 30, the first screen
will reappear, displaying Lines 01 - 06.
NOTE: Pressing BACK will not recall the previous
screen. Pressing BACK will bring up the last major
menu, e.g. either the BASE submenu display or the
Main Menu.
SEL
Press to highlight the Model Memory line to be made
the active model. In this example Line 02 - Beaver:
BACK STARLET
01 STARLET
02 BEAVER
03 GRAUBELE
Press
04 MODEL NAME 4
05 MODEL NAME 5
06 MODEL NAME 6
Line 02 is highlighted blue:
BACK STARLET
01 STARLET
02 BEAVER
03 GRAUBELE
04 MODEL NAME 4
05 MODEL NAME 5
06 MODEL NAME 6
NEXT
SEL
NEW
IMP.M
EXP.M
RES
CPY
(Change Model)
NEXT
SEL
NEW
IMP.M
EXP.M
RES
CPY
NEXT
SEL
NEW
IMP.M
EXP.M
RES
CPY