GRAUPNER mz-24 Pro Programming Manual page 186

mitter is held. A value equal to the set percentage
of the aileron differentiation means that this is re-
moved in maximum butterfly function (flaps com-
pletely out). In case of a reduction value bigger
than the set aileron differentiation, this will be re-
moved completely before the full deflection of the
flap control stick.
To set the differentiation, press the appropriate val-
ue field of the Red. column. In the example be-
low, the selected aileron travel must be changed
to 045%:
BACK PHASE 1 Aile diff
Diff. Red.
AI1 L+R 045% 000%
AI2 L+R 040% 000%
Press
FL1 L+R 035% 000%
FL2 L+R 030% 000%
The field highlights blue:
BACK Aile diff
PHASE 1
Diff. Red.
AI1 L+R 045% 000%
AI2 L+R 040% 000%
FL1 L+R 035% 000%
FL2 L+R 030% 000%
The adjustment range of ±150 % to allows you to
set the reduction of the set differentiation com-
pletely independently from the direction of rotation
of the servos installed in the wings.
186 Function menu | Airplane models - Aileron settings
Press the INC
( pq ) to increase/decrease the value:
BACK
Use the same procedure to adjust the other dif-
ferentiation values for all remaining flaps/ailerons.
SERVO
RES
Press the
back to the default.
NEXT
To save and exit, press the
INC
left of the display to return to the previous menu.
RES
DEC
BACK
Phase
SERVO
Aile diff
NEXT
Trainer
INC
RES
DEC
or DEC buttons or the arrow keys
Aile diff SERVO
PHASE 1
Diff. Red.
AI1 L+R 045% 045% NEXT
AI2 L+R 040% 000% INC
FL1 L+R 035% 000% RES
DEC
FL2 L+R 030% 000%
button to reset the changed value
BACK button at the top
BASE FUNCTION SYSTEM
D/R,EXP THR.CRV Prog.MIX Snap roll
Wing MIX Flap MIX Flap set Butterfly
Logical sw Sequence V-Tail