GRAUPNER mz-24 Pro Programming Manual page 136

Activating and Deactivating Mixers
To activate (ON) or deactivate (INH) a mixer that has
been setup as described above, press the value field
in the ACT column of the appropriate mixer. In the
example below, the mixer assigned to Line 1 needs to
be activated:
BACK
PHASE 1 Prog. MIX
ACT MST SLV SET
>>
INH CH1 CH3
1. >>
INH NONE NONE
>>
2.
Press
INH NONE NONE
3. >>
INH NONE >> NONE
4.
INH NONE NONE
>>
5.
The Line 1 mixer is now activated (ON):
BACK PHASE 1 Prog. MIX
ACT MST SLV SET
>>
ON CH1 CH3
1. >>
INH NONE NONE
>>
2.
INH NONE NONE
>>
3.
INH NONE NONE
4. >>
INH NONE NONE
>>
5.
Deleting Mixers
To reset a mixer, press either the MST or SLV column
button of the appropriate mixer line. In the example
below, the mixer assigned to Line 4 needs to be de-
leted:
BACK PHASE 1 Prog. MIX
ACT MST SLV SET
>>
ON CH1 CH3
1. >>
ON CH6 CH3 >>
>>
2.
Press
ON CH3 CH8 >>
>>
3.
>>
ON CH7 CH8
4. >>
INH NONE NONE
>>
5.
136 Function menu | general - Free mixer
Both the MST and SLV column buttons will open the
channel selection display screen:
BACK
CH7
CH1
CH5
SERVO
CH9
LIN.MIX
NEXT
Press either the MST or SLV channel buttons in the
top left of the screen. When cleared, both fields will
return to their default settings so it doesn't matter
which field is chosen. In the example below,
will be highlighted:
BACK
SERVO
CH7
LIN.MIX
NEXT
CH1
CH5
CH9
The button highlights blue:
BACK
CH7
CH1
CH5
SERVO
CH9
LIN.MIX
NEXT
SERVO
PHASE 1 Prog. MIX
CH8
>>
CH2 CH3 CH4 CLR
CH6 CH7 CH8
CH10 CH11 CH12
CH8
SERVO
PHASE 1 Prog. MIX
CH8
>>
Press
CH2 CH3 CH4 CLR
CH6 CH7 CH8
CH10 CH11 CH12
SERVO
PHASE 1 Prog.MIX
CH8
>>
CH2 CH3 CH4 CLR
CH6 CH7 CH8
CH10 CH11 CH12
Press the CLR button to reset both default values in
the blue and black MST and SLV fields:
BACK
PHASE 1 Prog.MIX
CH7 CH8
>>
CH1 CH2 CH3 CH4 CLR
CH5 CH6 CH7 CH8
Press
CH9 CH10 CH11 CH12
The fields have been reset to default:
BACK PHASE 1 Prog.MIX
NONE NONE
>>
CH1 CH2 CH3 CH4 CLR
CH5 CH6 CH7 CH8
CH9 CH10 CH11 CH12
BACK
Press the button at the top left of the display
to return to the mixer selection.
Linear (1 to 5) Mixer Setup
To set linear mixers 1-5, press the brackets
ton in the SET column in the appropriate mixer line:
BACK PHASE 1 Prog.MIX
ACT MST SLV SET
ON CH1 CH3 >>
>>
1.
>>
ON CH6 CH3
2. >>
Press
ON CH3 CH8 >>
>>
3.
INH NONE NONE
4. >>
INH NONE NONE
5. >>
SERVO
SERVO
>>
but-
SERVO
LIN.MIX
NEXT