Hott Synchronization Methods Setting - GRAUPNER mz-24 Pro Programming Manual

In the example below, the helicopter model named
"Starlet" is currently active. The model's name is vis-
ible in the active Model Memory line 01 as well as the
name bar at the top of the screen. The model type
icon is displayed. In the example below, the helicop-
ter icon is visible:
BACK STARLET
01 STARLET
02 BEAVER
03 GRAUBELE
04 MODEL NAME 4
05 MODEL NAME 5
06 MODEL NAME 6
To view the model-type of other models saved in
memory, press to highlight any model name in the
Model Memory lines. For example, by pressing line
03 in the example below, the glider icon appears:
BACK STARLET
01 STARLET
02 BEAVER
03 GRAUBELE
04 MODEL NAME 4
Press
05 MODEL NAME 5
06 MODEL NAME 6
BACK STARLET
01 STARLET
02 BEAVER
03 GRAUBELE
04
MODEL NAME 4
05 MODEL NAME 5
MODEL NAME 6
06
Note that "Starlet" remains in the name bar at the top
of the screen because it is still the currently active
model.

HoTT Synchronization Methods Setting

As mentioned in the section Starting the Receiv-
er (page 14): if both the receiver and the RF mod-
ule function are turned off, every model saved in the
Model Memory lines (01 - 30) can be switched from
NEXT
Standard Memory Specific HoTT-Synchronization to
SEL
Transmitter Specific and vice-versa. Models saved
NEW
in memory with active HoTT-synchronization, also
IMP.M
known as Global Bound, have a yellow
EXP.M
of the model memory line.
RES
CPY
MODEL NAME 1
MODEL NAME 1
NEXT
In the example below, Memory Lines 01, 02 and 03
SEL
are memory-specific HoTT-Synchronization; Memory
NEW
Lines 04, 05 and 06 have been switched to transmit-
IMP.M
ter-specific HoTT-Synchronisation:
EXP.M
BACK
RES
CPY 01
02
03
NEXT
04
SEL
05
NEW
06
IMP.M
EXP.M
Changing the HoTT-Synchronization
RES
Turn the transmitter's RF module off.
CPY
Press to highlight on model memory line to be
changed. For the example below, Model Memory 03
is being changed from Standard Memory to Global:
G to the right
G
NO yellow to the right of
memory line = memory-spe-
cific bound
G
Yellow to the right of mod-
el memory line = transmit-
G
ter-specific (global) bound
MODEL NAME 1 NEXT
MODEL NAME 1 SEL
MODEL NAME 2 NEW
MODEL NAME 3 IMP.M
MODEL NAME 4 G EXP.M
MODEL NAME 5 G RES
MODEL NAME 6 G CPY
BACK MODEL NAME 1
01 MODEL NAME 1
Press
02 MODEL NAME 2
03 MODEL NAME 3
04 MODEL NAME 4 G
05 MODEL NAME 5 G
06 MODEL NAME 6 G
Once the line is selected the field is highlighted blue:
BACK MODEL NAME 1
01 MODEL NAME 1
02 MODEL NAME 2
MODEL NAME 3
03
04 MODEL NAME 4 G
05 MODEL NAME 5 G
06 MODEL NAME 6 G
Press the model-type icon:
BACK MODEL NAME 1
Press
01 MODEL NAME 1
02 MODEL NAME 2
03 MODEL NAME 3
04 MODEL NAME 4 G
05 MODEL NAME 5 G
06 MODEL NAME 6 G
A selection window will pop up with two options:
BACK MODEL NAME 1
01 MODEL NAME 1
02 MODEL NAME 2
03 MODEL NAME 3
04 MODEL NAME 4 G
Select
05 MODEL NAME 5 G global
06 MODEL NAME 6 G NO
Base menu - Model selection
NEXT
SEL
NEW
IMP.M
EXP.M
RES
CPY
NEXT
SEL
NEW
IMP.M
EXP.M
RES
CPY
NEXT
SEL
NEW
IMP.M
EXP.M
RES
CPY
NEXT
SEL
NEW
IMP.M
EXP.M
RES
CPY
39