GRAUPNER mz-24 Pro Programming Manual page 91

CTL Column
Assigning Switch or Control
Tip
Channels 1 - 4 are located on the first page of this dis-
play screen, 5 - 8 on page 2, 9 - 12 on page three. The
delay menu is on page 4. Press the
the right side of the display to advance screens:
BACK PHASE 1
CTL Set
CH 1. ST 1
CH 2. ST 2 +100% +100%
CH 3. ST 3 +100% +100%
CH 4. ST 4 +100% +100%
CTL OFFSET – Travel+
BACK PHASE 1 CTL Set
CH 9. NONE 000% +100% +100%
CH 10. NONE 000% +100% +100%
CH 11. NONE 000% +100% +100%
CH 12. NONE 000% +100% +100%
CTL OFFSET – Travel +
To assign a control element, press on the value field in
the line of the desired control channel. In the example
below, CH6 needs to be assigned to switch SL2:
BACK
PHASE 1 CTL Set
Press
CH 5. NONE 000% +100% +100%
CH 6. NONE 000% +100% +100%
CH 7. NONE 000% +100% +100%
000% +100%
CH 8. NONE +100%
CTL OFFSET – Travel +
(Control/Switch) The active Select window appears:
CH 5.
CH 6.
CH 7.
NEXT button on
CH 8.
NO
Press to terminate the procedure.
SERVO
To assign the control or switch, activate the desired
control element. Remember that the dials and rotary
NEXT
controls are only recognized after a pause and need
INC
to be activated for slightly longer than the switches.
RES
Turn the dial in either direction to register the assign-
DEC
ment. Note that with an assigned 2-position switch,
the only option is to flip back-and-forth between the
end values (for example motor ON/OFF). The 3-posi-
SERVO tion switch offers a middle position.
The field displays either the control name or the
NEXT
switch number. In the example below, CH6 has been
INC
assigned to SL2:
RES
DEC
CH 5.
CH 6.
CH 7.
CH 8.
Deleting Controls or Switches
SERVO
Press the value field of the assignment to be delet-
NEXT
ed. In the example below, the switch assigned to CH6
INC
needs to be cleared:
RES
DEC
SERVO
BACK PHASE 1 CTL Set
Select
NONE 000% 100% 100% NEXT
NO
NONE 000% +100% +100% INC
CLR
NONE 000% +100% +100% RES
LOGIC
DEC
NONE 000% +100% +100%
CTL OFFSET – Travel +
BACK SERVO
PHASE 1 CTL Set
NONE 000% 100% 100% NEXT
SL 2 000% +100% +100% INC
NONE 000% +100% +100% RES
000% DEC
NONE +100% +100%
CTL OFFSET – Travel +
BACK PHASE 1 CTL Set
Press
CH 5. NONE 000% 100% 100%
CH 6. SL 2 000% +100% +100%
CH 7. NONE 000% +100% +100%
CH 8. NONE 000% +100% +100%
CTL OFFSET – Travel +
The active Select window reappears:
BACK PHASE 1 CTL Set
Select
CH 5. NONE 000% 100% 100%
NO
CH 6. SL 2 000% +100% +100%
CLR
000%
CH 7. NONE +100% +100%
LOGIC
CH 8. NONE 000% +100% +100%
CTL OFFSET – Travel +
To delete the assigned control or switch, press CLR :
BACK
PHASE 1 CTL Set
Select
Press
CH 5. NONE 000% 100% 100%
NO
CH 6. SL 2 000% +100% +100%
CLR
CH 7. NONE 000% +100% +100%
LOGIC
CH 8. NONE 000% +100% +100%
CTL OFFSET – Travel +
The CH6 field returns to NONE:
BACK
PHASE 1 CTL Set
CH 5. NONE 000% +100% +100%
CH 6. NONE 000% +100% +100%
CH 7. NONE 000% +100% +100%
CH 8. NONE 000% +100% +100%
CTL OFFSET – Travel +
Use the same procedure for the other settings.
Base menu - Control/switch setting
SERVO
NEXT
INC
RES
DEC
SERVO
NEXT
INC
RES
DEC
SERVO
NEXT
INC
RES
DEC
SERVO
NEXT
INC
RES
DEC
91