GRAUPNER mz-24 Pro Programming Manual page 175

Press the INC or DEC buttons or the arrow keys (
pq ) to increase/decrease the value:
BACK PHASE 1 S.MIX
ROLL >> NICK
A RATE B
000%
–012%
EXP
000% 000%
Use the same procedure for the value on the oppo-
site side of the control travel. In the example be-
low, RATE B needs to be changed to -012%:
BACK PHASE 1 S.MIX
ROLL >> NICK
A RATE B
–012% –021%
EXP
000% 000%
Press the RES button to reset the changed value
back to the default.
Make the necessary changes in the two EXP val-
ue fields as described in the FUNCTION submenu
D/R.EXP section (page 124).
To save and exit back to the S.MIX main display,
press the BACK button at the top left of the
screen:
BACK
PHASE 1 S.MIX
ROLL >> NICK
Press
A RATE B
–012% –021%
EXP
+050%
+050%
Notice
The mixed values portrayed in the above
graphics are for demonstration purposes only
SERVO
and do not represent real values.
BACK
INC
MIX.TYPE
RES
ROLL >> NICK
DEC
NICK >> ROLL
PITC >> ROLL
PITC >> NICK
Select and adjust all mixers as previously de-
SERVO
scribed.
• CTL Column
Press the field in the appropriate button to as-
INC
sign a control to the respective mixer. Refer to the
RES
BASE submenu CTL Set section (page 90) for in-
DEC
formation on setting switches. When the phase
is activated by turning the
Column, the assigned switch will perform the ad-
justments made in the SET display screen:
BACK
MIX.TYPE
ROLL >> NICK
NICK >> ROLL
PITC >> ROLL
PITC >> NICK
SERVO
INC
RES
DEC
SERVO
PHASE 1 S.MIX
ACT
SET CTL
ON >> ON
INH >> ON
INH >> ON
INH >> ON
(Control/Switch)
ON
button in the ACT
SERVO
PHASE 1 S.MIX
ACT
SET CTL
ON >> SW 5
INH >> ON
INH >> ON
INH >> ON
Function menu | Helicopter model - Helicopter mixer
To save and exit to the FUNCTION menu, press
BACK
the button at the top left of the screen.
BACK BASE FUNCTION
Phase D/R,EXP PIT.CRV THR.CRV
THR.HOLD Swash S.Limit S.MIX
Prog.MIX Trainer PIT>>TAIL Logical sw
SYSTEM
Gyr/Gover
THR.MIX
Sequence
175