GRAUPNER mz-24 Pro Programming Manual page 61

To retain the model type but change a model setting,
the same procedure is utilized. In the example be-
low, the wing type of the current model needs to be
changed from "1AILE" to "2AILE 2FLAP'. Press the
Wing Type button:
BACK
M/TYPE W/TYPE P/TYPE
NORMAL
1A
T/TYPE
AIRPLANE ELE.POWER
Press
NORMAL
The WING Type menu will be displayed. Press to se-
lect the appropriate wing type:
WING Type
NORMAL
1AILE 1AILE 1FLAP 2AILE 2AILE 1FLAP
2AILE 2FLAP 2AILE 4FLAP 4AILE 2FLAP 4AILE 4FLAP
Continue selecting the appropriate icons for the addi-
tional fields displayed in the following menus, such as
Tail Type. The information display will appear when all
selectable fields are completed:
Press the ENT
display to return to the BASE menu display:
Notices
• Options are limited depending on certain
model types. When selecting BOAT, the only
Press
possible selection is between motor powered
or non-motor powered model type:
• When selecting CAR and DRONE, the only
possible selection is the model type:
button at the lower right side of the
M/TYPE W/TYPE P/TYPE
NORMAL
2A2F
T/TYPE
ELE.POWER
MOTOR
Press
NORMAL
ENT
BACK
M/TYPE P/TYPE
BOAT POWER
BACK
COPTER
ENT
Base menu - Model type 61