Before Use; Introduction; Warning And Advisory Symbols And Their Meaning - GRAUPNER S1005 Programming Manual

Programming example
Sequencer ................................................................. 218
Appendix
Appendix .................................................................... 220
Declaration of conformity ........................................... 226
Graupner Service Centre .......................................... 227
Warranty certificate .................................................... 227

Before use

We are glad that you have chosen a Graupner mz-18
HoTT or mz-24 HoTT 2.4 GHz remote control system.
This system is extremely versatile and can be used by
both beginners and experts.
Please carefully review this manual to achieve the best
results with your remote control, and especially for safe
flying. If any difficulties arise during use, consult the
manual, contact your dealer, or contact the Graupner
Service Center.
Due to technical changes, the information within this
manual may be changed without prior notification.

Introduction

The Graupner remote-control system can be used to
control airplanes, gliders and helicopter models, and
is the perfect choice for anyone looking for a superior
remote-control system. The HoTT system transmits
a range of real-time data such as the motor speed,
voltage, temperature, warnings programmed by the
user, etc. Such data are for example transmitted directly
from a HoTT-compatible governor without requiring
additional sensors. Of course, these data can also be
transmitted from separately-connectable sensors that
are compatible with the HoTT system.
WARNING:
Read all of the instructions so that you
become familiar with how to operate the
system before you start using it. Misuse can
damage the system, cause property damage and/or
serious injury.

Warning and advisory symbols and their meaning

WARNING:
This symbol indicates subsequent information
that is essential for the user to observe. If
these instructions are not followed, the reliable
operation of the system and safety of the operator and
third parties cannot be ensured.
NOTE:
This symbol indicates subsequent information
that the user must observe. If these
instructions are not followed, it may result in
damage of every category, a loss of warranty, etc.
Without a specific heading, this symbol
indicates subsequent information or
suggestions which the user must follow. If
these instructions or suggestions are not followed,
damage of every category can result.
This symbol indicates instructions and
suggestions of all kinds which the user must
follow.
This symbol indicates instructions on the care
of the device that the user must follow to
P
ensure the device remains useful over a long
period.
3
Before use