GRAUPNER mz-24 Pro Programming Manual page 147

Training Mode
During training, the teacher and pupil can maintain a
comfortable distance. Do not exceed a distance of
164 feet (50 m). No one should be between the teach-
er and pupil: this reduces the feedback channel range
used to connect the two transmitters.
While in Training Mode, the main display of the TEACH
transmitter may look like the example graphic below:
000%
TX RX
RX 05.5V
000:00.0
000 000
mz
000:00.0
0:01:23
M - 1
000 000
PHASE 1
STARLET
BATT TIME 00: 01: 23
000
The PUPIL transmitter may look like the example
graphic below:
000%
000:00.0
000 000
mz
000:00.0
0:01:23
M - 1
000 000
PHASE 1
PUPIL
BATT TIME 00: 01: 23
000
If connection between TEACH and PUPIL transmit-
ters is lost during training, the TEACH transmitter au-
tomatically assumes control of the model.
If connection is lost and the trainer-switch is in the
pupil position, acoustic warnings sound, and a warn-
ing message flashes every second at the top left of
the display:
No pupil signal
0:01:23
M - 1
BATT TIME
In both examples, bring both transmitters closer to-
gether. If does not restore the connection, immediate-
ly stop using the model and troubleshoot the connec-
000%
tion problem.
4.2V
Restarting the Trainer Mode
If one of both transmitters have been turned off, the
following active warning will appear in the TEACH
transmitter once the transmitter(s) is turned on:
000
0:01:23
000%
4.2V M - 1
BATT
The following active warning will appear in the PUPIL
transmitter once the transmitter(s) is turned on:
000
0:01:23
M - 1
BATT
Pressing the ON
active. Pressing
000% 000%
TX RX
4.2V
RX 05.5V
000:00.0
000 000
mz
000:00.0
000 000
PHASE 1
STARLET
00: 01: 23
000 000
000% 000%
TX RX Warning
4.2V
RX 00.0V
Thr.HOLD Thr.CUT 000:00.0
000 000
Thr.-POS PHASE
mz
000:00.0
TEACHER SIGNAL
000 000
PHASE 1
Please select RF ON/OFF
STARLET
ON OFF
TIME00: 01: 23
000 000
000% 000%
Warning
4.2V
Thr.HOLD Thr.CUT 000:00.0
000 000
Thr.POS PHASE
mz
000:00.0
PUPIL SIGNAL
000 000
PHASE 1
PLEASE select RF ON/OFF
SCHÜLER
ON OFF
TIME00: 01: 23
000 000
button confirms the Trainer Mode is
OFF stops the training mode.
Function menu | general - Trainer 147