GRAUPNER mz-24 Pro Programming Manual page 189

The field highlights blue:
BACK PHASE 1 Wing MIX
RUDD >> AILE
A RATE B
+100% +100%
Press the INC or DEC buttons or the arrow keys
( pq ) to increase/decrease the value.
Use the same procedure to adjust the other values.
In the example below, RATE B now needs to be set
at +50%:
BACK
PHASE 1 Wing MIX
RUDD >> AILE
A RATE B
+050% +050%
RES
Press the button to reset the changed value
back to the default.
Tip
Bring up the servo monitor in one of three ways: press-
ing the SERVO button in the upper right corner of the
display, by simultaneously pushing both arrow keys
( pq ), or by pressing the BASE submenu Servo icon.
To exit the Servo display, press the
push the ESC key to return to the previous menu.
To save and exit, press the
left of the display to return to the previous menu:
SERVO
RUDD >> AILE
INC
RES
DEC
The main Wing MIX display appears:
RUDD >> AILE
SERVO
AILE >> RUDD
RUDD >> ELEV
INC
RES
DEC
AILE >> RUDD Line
The rudder moves to an adjustable degree when the
aileron is actuated. This can compensate for the neg-
ative torque in conjunction with Aileron Differentia-
tion (page 184) which smooths flight in curves. The
rudder remain separately controllable.
The setting range of ±150 % makes it possible to ap-
propriately adapt the deflection direction. This mixer
can be turned on and off so that the model can be
used exclusively via the ailerons. Turn mixer off with a
BACK button or
control (which cannot be independently reset), a con-
trol switch or a logical switch.
Tip
Normally, this mixer is adjusted so that the rudder ex-
tends on the side of aileron moving upward; an adjust-
ment of 50% is generally appropriate.
BACK button at the top
BACK PHASE 1 Wing MIX SERVO
Press
A RATE B
+050% +050% INC
RES
DEC
BACK PHASE 1 Wing MIX SERVO
MIX.TYPE ACT SET CTL
>>
INH ON
>>
INH ON
>>
INH ON
(Aileron >> Rudder)
The adjustment should normally be symmetrical with
the neutral point of the aileron control stick.
To set the mixer, press the
AILE>>RUDD line:
BACK PHASE 1 Wing MIX
MIX.TYPE ACT SET
>>
RUDD>> AILE ON
>>
AILE >> RUDD INH
RUDD >> ELEV INH >>
Press
The AILE>>RUDD setting display opens:
BACK PHASE 1 WING MIX
AIL >> RUDD
A RATE
+100%
Press the desired value field. In the example below,
RATE A needs to be at +50%:
BACK PHASE 1 WING MIX
AIL >> RUDD
A RATE
+100%
Press
Function menu | Airplane models - Airplane mixer
>> button in the
SERVO
CTL
SW 6
ON
ON
SERVO
B
+100% INC
RES
DEC
SERVO
B
INC
+100%
RES
DEC
189