Display - GRAUPNER mz-24 Pro Programming Manual

Display

Transmitter Display Settings
Use this menu to enter display settings such as screen
brightness, turning on/off the back-lighting, adjusting
the touchscreen sensitivity and turning on/off the out-
door display function. Personalize the radio face by
changing the color of the Graupner logo. This menu
also shows the transmitter's RFID number.
To adjust these settings, from the main display press
the SYSTEM menu gear icon (purple "S") to bring up
the SYSTEM submenu screen:
000%
000:00.0
000 000
mz
000:00.0
0:01:23
M - 1
000 000
PHASE 1
MODELLNAME 1
BATT TIME 00: 01: 23
000
From the SYSTEM submenu, press the Display icon:
BACK BASE FUNCTION
ST mode Warning Etc. Set
Stick Cali MP3
216 System menu - Display
Brightness Line
Use this option to make the transmitter displays easi-
er to read in all weather conditions and temperatures.
To make any necessary changes to the setting, press
the value field of the Brightness line:
000%
4.2V
The field highlights blue:
Press
000
SYSTEM
Display
Press the INC
Press
( pq ) to select the appropriate value. The brightness
can be adjusted in increments of 1 from 01 - 20:
BACK Display
Brightness 15
OFF
Backlight o
Press
INC
1
Touch sense
RES
Logo color DEFAULT
OFF DEC
Outdoor disp
RFID AAAAA876
BACK Display
15
Brightness
OFF
Backlight o
1 INC
Touch sense
Logo color DEFAULT RES
OFF DEC
Outdoor disp
RFID AAAAA876
or DEC buttons or the arrow keys
Display
BACK
20
Brightness
OFF
Backlight o
1 INC
Touch sense
DEFAULT RES
Logo color
DEC
OFF
Outdoor disp
RFID AAAAA876
Press the RES button to reset the changed value
back to the default value (15).
Notice
If the transmitter's supply voltage has reached
the warning threshold set in the SYSTEM sub-
menu Etc. Set, the display brightness will be re-
duced to 05 to save energy. After charging the battery,
reset the desired value in the Brightness field again.
Backlight Off Line
Use this option to specify how long the background
lighting remains on when the transmitter is idle. This is
an important battery saving feature.
Choose from the following settings (in seconds and
minutes): OFF (backlight always on), 10s, 30s, 1m
and 3m.
To make any necessary changes to the setting, press
the value field of the Backlight off line:
Display
BACK
20
Brightness
OFF
Backlight o
1
Touch sense
Press
DEFAULT
Logo color
OFF
Outdoor disp
RFID AAAAA876
The field highlights blue:
Display
BACK
20
Brightness
OFF
Backlight o
Touch sense 1
DEFAULT
Logo color
OFF
Outdoor disp
RFID AAAAA876
Press the INC or DEC buttons or the arrow keys
( pq ) to select the appropriate value:
INC
RES
DEC
INC
RES
DEC