GRAUPNER mz-24 Pro Programming Manual page 75

Press the INC or DEC button at the right edge of
the display or the arrow keys ( pq ) to the left of the
display screen to increase/decrease time (between
00:00 to maximum 59:59), as shown below:
BACK Timer
TIMER1 T.RES 000 : 00
UP 59 59
MODE ALARM :
NULL
START SW
NULL NULL
STOP SW LAP SW
>>
NULL
RESET SW LAP List
LAP ALARM OFF
Press the RES button to reset the changed value
back to the default.
Forward-counting timer
Forward-counting timers start at 000:00.
Backward-counting timer
Backward-counting timers start at -000:00. Press the
button in the MODE line to change to this option:
BACK Timer
TIMER1 T.RES 000 00
:
UP 59 59
MODE ALARM :
START SW NULL
Press
NULL NULL
STOP SW LAP SW
>>
RESET SW NULL LAP List
OFF
LAP ALARM
BACK Timer
TIMER1 T.RES 000 : 00
DOWN 59 59
MODE ALARM :
NULL
START SW
NULL NULL
STOP SW LAP SW
>>
NULL
RESET SW LAP List
LAP ALARM OFF
Notice
If a timer is started, then stopped and switched
from forward to backward counting (or vice ver-
sa), only the remaining time on the timer is updat-
ed; the time is not reset.
Start/Stop Timer1 and Timer2
NEXT
INC • Timer 1
RES
This timer can only be started through a switch as-
DEC signed in the START SW line. In the example be-
low, the S8 switch is assigned to start the timer
and the S2 switch has been assigned to stop the
timer.
BACK
( UP )
TIMER1
MODE
START SW
( DOWN )
STOP SW
RESET SW
Notice
Stopping Timer 1 also stops the data log re-
NEXT
cording to the SD memory card.
INC
RES
DEC
• Timer 2
This timer can be started and stopped by tapping
on the minutes or seconds field or alternatively
through a switch assigned in the START SW line:
NEXT
INC
RES
DEC
Timer
T.RES 000 00
:
UP 00 00 SW
ALARM :
SW 8 INC
SW 2 NULL RES
LAP SW
NULL >> DEC
LAP List
OFF
LAP ALARM
BACK Press Timer
TIMER2 T.RES 000 : 00
UP 00 00
MODE ALARM :
Press
SW 6 NULL
START SW LAP SW
>>
NULL
RESET SW LAP LIST
LAP ALARM OFF
Resetting Started Timers
1. Both Timer 1 and Timer 2 can be reset to the de-
fault value at any time by tapping on the related
timer field in the basic display
000%
000:00.0
Press
000 000
mz
000:00.0
0:01:23
Press
M - 1
000 000
PHASE 1
MODELLNAME 1
BATT TIME 00: 01: 23
000
2. Both Timer 1 and Timer 2 can be reset to the de-
fault value at any time by pressing the
ton in the Timer1 and Timer2 displays:
BACK
Timer
TIMER2 T.RES 012 34
:
UP 00 : 00
MODE ALARM
Press
START SW SW 6 LAP SW NULL
NULL >>
RESET SW LAP LIST
OFF
LAP ALARM
Base menu - Timers
NEXT
INC
RES
DEC
000%
4.2V
000
T.RES but-
NEXT
INC
RES
DEC
75