GRAUPNER mz-24 Pro Programming Manual page 43

Press the button to the right of the Wing Type line
to switch between delta/flying fixed-wing models. A
different submenu appears depending on if the model
is NORMAL or DELTA :
Wing Type DELTA
2AILE
2AILE 1FLAP 2AILE 2FLAP
2AILE 4FLAP
4AILE 2FLAP 4AILE 4FLAP
Pressing the wing icon will bring up the tail type menu:
Tail Type
Press the blue icon that corresponds to the model's
tail type:
NORMAL V-TAIL 2ELEVATOR
Pressing the tail icon will bring up the propulsion type
menu:
Propulsion Type
Press the blue icon that corresponds to the model's
motor type:
ELECTRIC POWER GAS POWER
Tip
The default for "Motor Off" or "Idle" is Rear Thro Posi-
tion. This can be changed to Front Thro Position for
fixed-wing models by inverting the control curve in the
BASE submenu Throttle Curve (page 128).
Pressing the propulsion icon brings up an Overview
Display showing all settings selected. To save, press
the ENT button at the right bottom:
M/TYPE W/TYPE P/TYPE
NORMAL
2A
T/TYPE
ELE.POWER
AIRPLANE
NORMAL
Pressing ENT brings up the BASE submenu display:
BACK BASE FUNCTION
Model Sel Model Type E.P.A REV/SUB
TX ctl Timer Fail Safe Trim Step
CTL Set Out.Swap Telemetry Announce
ENT
SYSTEM
THR.CUT
Servo
Base menu - Model selection 43