Basic Sett (Aircraft And Helicopter) 47P; Batt Type 47P; Batt Warning 48P; Touch Sense 48P - GRAUPNER HOT TG/mz-12 Operating Instruction

press
11. Basic sett (Aircraft and Helicopter)
•
Batt type
The battery that is used to the transmitter can be selected. NiMH and LiPo are available.
•
Batt warning
When the transmitter voltage drops below the preset voltage, the transmitter beeps the alarm to warn
the low battery.
•
Touch sense
The touch sense is used for adjusting the sensitivity of the button. The available values are 1~10. The
lower the value, the more sensitive.
•
Contrast
Use the contrast to adjust contrast of the LCD. The available values are -20~20. The lower the value,
the more bright.
•
Display light
The backlighting time is adjusted.
•
Rf country
T6 offers 2 modes of GENERAL and FRANCE. You need the France RF setting to comply with France
regulations in FANCE. France RF setting should only be turned on when operating your transmitter in
France outdoors.
•
Voice volume
The volume of the telemetry is adjusted.
•
Beep volume
The beep volume is adjusted.
- Batt type
Press the direction button to highlight the basic sett then press the ENT button to access the Batt
ENT
type line. Press the ENT button to highlight the value then press the direction button to adjust the
TEL VIW
value. Press the ESC button to remove the highlight. You may select the function of which you
wish to adjust the value by pressing the direction button.
ESC
ENT
TEL VIW
ESC
ENT
TEL VIW
ESC
press
press
press
ENT
TEL VIW
ESC
press
ENT
TEL VIW
ESC
ENT
TEL VIW
ESC
ENT
TEL VIW
ESC
press
ENT
TEL VIW
ESC
47