Running The Setup Wizard - Quantum Scalar i6000 User Manual

Chapter 3: Configuring Your Library

Running the Setup Wizard

Running the Setup Wizard
118
• Setting Up Media Security Notifications
• Configuring Devices
• Configuring Drive Cleaning
• Registering SNMP Traps
• Configuring Library Security
• Using LDAP on page 234
• Configuring Screen Saver Preferences
• Working With Data Path Conditioning
• About the Configuration Record
• Setting Aisle Lights
• Configuring a Webcam For Your Library
For a brief overview of the LMC, see
on page 420.
If you are configuring your library for the first time, see the
Installation Guide
for information about performing an initial library
configuration.
Note: Only one administrator can be logged on and performing
library configuration at any one time. If another administrator
attempts to log on, a message appears, warning that only one
administrator at a time is permitted on the library. If a service
user logs on while an administrator or regular users are logged
on already, the library automatically logs off those users.
Use the Setup Wizard command to initially configure important
settings on a library as part of the normal installation procedure. Before
you can manage your library from a remote LMC client, you must
initially configure the library from its touch screen by either running the
Setup Wizard command or using individual configuration commands
on page 191
on page 194
on page 222
on page 226
on page 228
on page 241
on page 243
on page 245
on page 246
on page 247
Library Management Console (LMC)
Quantum Scalar i6000 User's Guide
Scalar i6000