Quantum Scalar i6000 User Manual page 210

Chapter 3: Configuring Your Library
Configuring Drive SCSI ID
196
4 Select the drive who's SCSI ID you want to change from the Select
Device drop-down list. The drop-down list uses the drive's location
coordinates to identify the drive.
For example, in the figure above, the drive is in position 10. The
following figure shows its location in the control module. For more
information about location coordinates, see
Location Coordinates
Drive 12
(1,1,1,10,1,1)
Drive 10
Drive 2
5 To specify a particular ID for a drive, click a new ID number from the
New ID drop-down list.
6 Click Set.
on page 437.
Drive 11
Drive 9
Drive 8
Drive 7
Drive 6
Drive 5
Drive 4
Drive 3
Drive 1
Quantum Scalar i6000 User's Guide
Understanding