Configuring Fibre Channel Drive Speed, Topology, And Loop Id - Quantum Scalar i6000 User Manual

Configuring Fibre Channel Drive Speed, Topology, and
Loop ID
Quantum Scalar i6000 User's Guide

Configuring Fibre Channel Drive Speed, Topology, and Loop ID

Administrators can view and modify Speed, Topology, and
settings for Fibre Channel tape drives.
If the affected partition is online, it will be taken offline before the
parameters are set, and brought back online after they are set.
1 Click Setup > Drives > FC Settings.
2 The Drive Settings dialog box appears.
3 From the Partition Filter drop-down list, select all partitions or a
single partition whose drive settings you want to set.
4 Configure the settings as described below:
Chapter 3: Configuring Your Library
Loop ID
197