Working With Local User Accounts - Quantum Scalar i6000 User Manual

Chapter 13: Running Your Library

Working With Local User Accounts

Function
Setup > Device > IDs
Tools > Partitions Defragmentation
Operations > Inventory (physical library view)
Tools > Teach
Tools > Save/Restore (restore, revert, or rescue)
Tools > Verification Tests (start test)
Tools > Update Software (update or reinstall library
software)
Service > Manual Diagnostics
Tools > Update Software (set up autoleveling or
update drive firmware)
Tools > Update Drive Firmware
Working With Local User Accounts
Creating Local User
Accounts
452
You can set up three levels of user accounts: guest, user, and
administrator. Guests see only the main LMC display. Local Users can
operate a partition, but cannot run diagnostic tools, which require
access to the physical library. Administrators can access the entire
physical library and all of its partitions. For a summary of user privileges
defined by physical library, partition, and command menu, see
on page 423.
For information on user accounts that reside on a Lightweight Directory
Access Protocol (LDAP) server, see
1 Log on as an administrator.
2 Make sure that you are viewing the physical library. From the View
menu, click the name of the physical library.
3 Click Setup > User Configuration > Local Users.
Physical Library
—
Offline
(Offline)
Current view (library or partition) must
be offline
Using LDAP
Quantum Scalar i6000 User's Guide
Partition
Offline
—
Table 32
on page 234.