Creating Host Access Groups; Configuring Host Access To Storage Networking Drives And Partitions - Quantum Scalar i6000 User Manual

Chapter 10: Storage Networking

Configuring Host Access to Storage Networking Drives and Partitions

376
• Deleting a Host Access Group
• Adding a Host to an Access Group
• Removing a Host from an Access Group
• Host Access Configuration – Modifying Drives/Partitions and
Viewing Host Access Groups

Creating Host Access Groups

A host access group is composed of at least one host and one drive.
Each host in the access group can send read/write commands to the
drives in the group, and can send move commands to the partitions in
the group. A host can only be in one access group. Drives and partitions
can be in multiple access groups.
To create host access groups:
1 Select Setup > Drives > Access > SNW Wizard to display the SNW
Wizard.
2 Click Next to display the Select Storage Networking Option screen.
on page 384
on page 385
on page 387
on page 390
Quantum Scalar i6000 User's Guide