Quantum Scalar i6000 User Manual page 269

To...
Enable Active Vault policies on
a partition
Modify existing Active Vault
policies on a partition
Disable Active Vault policies on
a partition
Quantum Scalar i6000 User's Guide
3 Create, modify, or remove policies on a standard partition by doing
one of the following:
Do this...
1 Select Enable.
2 Select a partition from the table that has Active Vault policies
disabled.
3 Proceed to Step
1 Select Modify.
2 Select a partition from the table that has Active Vault policies
enabled.
3 Proceed to Step
1 Select Disable.
2 Select a partition from the table that has Active Vault policies
enabled.
3 Click Finish.
A confirmation dialog box appears asking you to confirm you
want to disable the Active Vault policies on the partition.
4 Click Yes to confirm.
A "success" dialog box appears.
5 Click OK to close the dialog box.
Process is complete.
4 Click Next.
The Active Vault Policies screen appears.
4.
4.
Chapter 4: Active Vault
Configuring Active Vault
255