Understanding The Verification Test Inventory; Drive Sled Assembly Test; Scan Barcode Test; I/E Station Assembly Test/Scanner Fiducial Test - Quantum Scalar i6000 User Manual

Hide thumbs Also See for Scalar i6000:

Table of Contents

Quantum Scalar i6000 User's Guide

The drive sled assembly test performs the following tasks:

• Calibrates the drive sled

• Checks the quality of the sled's fiducial

• Performs Get/Put to the drive

The scan barcode test performs the following tasks:

• Moves to selected cell coordinate and scans the barcode label

• Checks to ensure the label reads the same from top to bottom

• Verifies the quality of the barcode labels and checks to make sure

barcode labels are in a readable position

I/E Station Assembly Test

The I/E station assembly test performs the following tasks:

• Locks and unlocks the I/E station

• Calibrates the I/E station and check offsets collected

• Checks each magazine's fiducial in the I/E station

• Performs Get/Put tests on all the I/E station cells

Scanner Fiducial Test

The scanner fiducial test performs the following tasks:

• Scans and checks each magazine fiducial

• Scans and checks each drive sled fiducial

• Tests the calibration sensor

• Calibrates and checks repeatability, up to three times for failed

calibration targets

Understanding the Verification Test Inventory

The verification tests generate inventory lists that provide specific

information about the library's configurations. Inventory lists for the

library, drives, and blades are available. On the Verification Test dialog

Chapter 15: Maintaining Your Library

Maintenance Actions