Quantum Scalar i6000 User Manual page 151

Quantum Scalar i6000 User's Guide
8 Configure the following media policy settings:
• For Media Checking Policy, select one of three options:
• No Restrictions - Allow any media to be moved anywhere
• Enforce Restrictions - If the media type is known, the
barcode contains a media identifier that will enforce
restrictions. For example, LTO6 supports reading LTO6, LTO5
and LTO4 media and writing to LTO6 and LTO5 drives. This
setting is the default setting.
• Full Restrictions - The media type identified must be known
before we can import or move a media to a drive.
• From the Return Media Identifier drop-down list, select either
Suffix, Pass Through, Prefix, or Disabled. Depending on which
setting you choose, you can control the use of the media type
identifier in the volume serial number that is returned to the
host.
Caution: After a media volume serial number has been
reported to a host, changing the Return Media
Identifier setting could cause the host to not
recognize media within the library.
Chapter 3: Configuring Your Library
Working With Partitions
137