Quantum Scalar i6000 User Manual page 584

Chapter 15: Maintaining Your Library
Maintenance Actions
570
Note: Drives that are not connected to I/O Blades or EEBs are
listed, since drives not connected to I/O Blades can be
updated using FMR Tapes. Refer to
Firmware Using Update Tapes
2 In the left-most column of the table under the Update Method
area, select one or more check boxes that correspond to drives that
you want to update with the same drive firmware image. Use the
following rules to select drives:
• Do not select drives that are currently loaded.
• If you select more than one drive, make sure that they are all of
the same drive type.
• Click Select All to select all drives. (All drives must be of the
same drive type.)
Note: You can only perform firmware update for drives of the
same product, like HP or IBM for example, and type, for
example LTO-4 or LTO-5.
3 From the drop-down list in the Select Firmware File area, click the
drive firmware image you want to use to update the drives you
selected.
Caution: The drop-down list includes all drive firmware images
that are currently stored on the library, regardless of
drive type. Be careful to select a drive firmware image
that is compatible with the type of drive that you want
to update. See the library's
compatibility information or contact Quantum
technical support.
4 Click Start.
Note: The library automatically logs off other users so that they
cannot perform library operations while the drive firmware
update operation is in progress.
The library updates the firmware on each selected drive.
Updating Drive
on page 571.
Release Notes
for
Quantum Scalar i6000 User's Guide