Quantum Scalar i6000 User Manual page 149

Quantum Scalar i6000 User's Guide
The Partitions dialog box appears, listing partitions that are
currently configured within the library.
Note: If you want to cancel the partition creation process, click
Close. The Close button becomes unavailable after you
click Create later in this procedure.
4 Click Create.
The Partitions - Step 1: Choose Creation Mode dialog box
appears.
5 Select Simple, and then click Next.
The Partitions - Step 2: Choose Partition Properties dialog box
appears.
6 Configure the following settings:
• In the Name text box, type a name that describes the new
partition.
• From the Vendor ID list, select the vendor.
The Vendor ID information is used in the SCSI Inquiry
command. The choices are QUANTUM and ADIC. The default is
Chapter 3: Configuring Your Library
Working With Partitions
135