System Status Buttons In Good Status; Subsystems And Their Components - Quantum Scalar i6000 User Manual

Area
Configuration
System Status Buttons
Figure 33 System Status
Buttons in Good Status
Table 34 Subsystems and Their
Components
Subsystem
Drives
Quantum Scalar i6000 User's Guide
Description
Configuration summary information is presented textually. Data points reported
are:
• Number of tape drives
• Drive types: AIT, LTO, DLT or—for the physical library only—Mixed
• Total number of licensed storage slots (appears only in the physical library
view)
• Total number of storage slots in the physical library or partition, depending on
the current view
• Library type
• Number of robots (library view only).
System status buttons are located in the Overall System Status area at
the bottom of the LMC (see
Each button represents a subsystem.
subsystems and some of the components that each subsystem
represents. Each field replaceable unit (FRU) in the library belongs to
one of the subsystems.
Components
Drives, such as brick firmware, drive bricks, drive sleds
Chapter 13: Running Your Library
Library Management Console (LMC)
Figure 33).
Table 38 shows the library
435