Monitoring Connectivity Status; Viewing I/O Blade Status Information - Quantum Scalar i6000 User Manual

Monitoring
Connectivity Status
Quantum Scalar i6000 User's Guide
• Change the sorting of drives in the status list (for example, by
type or location) by clicking the column heading by which you
want the drives sorted. Repeatedly clicking a column heading
toggles between ascending and descending order.
• Mail, save, or print status information by using the Send button
(see Mailing, Saving, and Printing Status Information
page 523).
The following dialog boxes display status information about
connectivity:
• The IO Blade Status dialog box displays information about the I/O
blades.
Note: If the library does not detect at least one chassis
management blade (CMB) in the library, the IO Blade
selection does not appear on the menu.
• The Fibre Channel Status dialog box displays information about
the FC connections on the MCB and the I/O blades (if any exist).
• The Ethernet Blade Status dialog box displays information about
the Ethernet Expansion Blade (EEB) connection.
You must perform the following procedures while viewing the physical
library.

Viewing I/O Blade Status Information

1 Make sure that you are viewing the physical library. From the View
menu, click the name of the physical library.
2 Click Monitor > Connectivity > IO Blade.
The IO Blade Status dialog box appears.
Chapter 15: Maintaining Your Library
Monitoring the Library
on
499