Quantum Scalar i6000 User Manual page 511

Figure 45 Right view of Drive
Status dialog box
.
Element Description
Type The type of drive.
WWN For a Fibre drive only, the World Wide Name of the drive.
WWPN Port 1 For a Fibre Channel drive only, the World Wide Port Name of the drive's port 1.
WWPN Port 2 For a Fibre Channel drive only, the World Wide Port Name of the drive's port 2.
Link Status P1 The status of port 1 on the Fibre Channel drive.
Link Status P2 The status of port 2 on the Fibre Channel drive.
SCSI ID For a SCSI drive only, the SCSI ID of the drive.
RAS The status of the drive as reported by the RAS system (for example, Good or
Failed).
Firmware level The firmware level of the drive.
Media ID The barcode of the loaded cartridge.
Quantum Scalar i6000 User's Guide
The following table describes the elements on the Drive Status
dialog box.
Chapter 15: Maintaining Your Library
Monitoring the Library
497